(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins - Eccentric
- Volume Discount
Locating Pins used when the hole location differs in the mounting area and the locating area.
Part Number
Configured Part Number is shown.
● Standard
● Pilot
[ ! ] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, chamfer tolerances are excluded.
| [M] Material | [S] Surface Treatment | [H] Hardness | Type | |
| Standard | Pilot | |||
| SKS3 Equivalent | — | Treated Hardness: 60 to 63 HRC | JPEA | JPEIA |
| SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50 to 55 HRC / Plating Hardness: 750 HV or more | GJPEA | — |
| SUS304 | — | — | SJPEA | SJPEIA |
| SUS440C or 13Cr Stainless Steel | — | Treaded Hardness: 50 to 55 HRC | CJPEA | CJPEIA |
Specification Table
| Part Number |
| JPEA32 SJPEIA25 |
| Part Number | d1 | d2 | T | H | Applicable Bolt | e | (A) | D1 | D1g6 | L | ||
| Type | D | |||||||||||
| Standard JPEA GJPEA SJPEA CJPEA | Pilot JPEIA SJPEIA CJPEIA | 10 | 3.5 | 6.5 | 6 | 4 | M3 | 1 | 2.75 | — | — | — |
| 12 | 4.5 | 8 | 8 | 5 | M4 | 1.2 | 3.2 | 8 | − 0.006 − 0.017 | 8 | ||
| 16 | 5.5 | 9.5 | 10 | 6 | M5 | 2 | 5.25 | 8 | 8 | |||
| 20 | 6.5 | 11 | 12 | 7 | M6 | 2.5 | 7 | 11 | − 0.007 − 0.020 | 10 | ||
| 25 | 9 | 14 | 16 | 9 | M8 | 3.5 | 9 | 14 | 12 | |||
| 32 | 11 | 17.5 | 20 | 11 | M10 | 5 | 12.25 | 17 | − 0.009 − 0.025 | 15 | ||
| 40 | 14 | 20 | 24 | 13 | M12 | 7 | 17 | 20 | 18 | |||
Alterations
| Alterations Code | Alteration Details | Application Conditions | Ordering Example | ||||||||||||||||||||
| LAC | Adds a wrench hole | Adds a wrench hole. Select LAC = 45, 135 [ ! ] Only 1 hole can be specified.
| JPEIA20-LAC45 | ||||||||||||||||||||
| LC | Cuts and change the pilot section | Cuts the pilot section. LC = 1 mm Increments [ ! ] Applicable to Pilot only
| JPEIA20-LC8 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| CJPEIA12 |
| CJPEIA16 |
| CJPEIA20 |
| CJPEIA25 |
| CJPEIA32 |
| CJPEIA40 |
| JPEIA12 |
| JPEIA16 |
| JPEIA20 |
| JPEIA25 |
| JPEIA32 |
| JPEIA40 |
| SJPEIA12 |
| SJPEIA16 |
| SJPEIA20 |
| SJPEIA25 |
| SJPEIA32 |
| SJPEIA40 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Environmentally friendly | Characteristics/Applications | Surface Treatment | Heat Treatment | Material | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 91.86 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 12 | g6 | |
MYR 96.25 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 16 | g6 | |
MYR 105.06 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 20 | g6 | |
MYR 136.41 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 25 | g6 | |
MYR 179.32 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 32 | g6 | |
MYR 239.83 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 40 | g6 | |
MYR 53.35 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 12 | g6 | |
MYR 56.66 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 16 | g6 | |
MYR 59.40 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 20 | g6 | |
MYR 76.46 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 25 | g6 | |
MYR 110.01 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 32 | g6 | |
MYR 143.57 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 40 | g6 | |
MYR 81.41 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Not Provided | [Stainless Steel] SUS304 | 12 | g6 | |
MYR 85.26 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Not Provided | [Stainless Steel] SUS304 | 16 | g6 | |
MYR 89.11 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Not Provided | [Stainless Steel] SUS304 | 20 | g6 | |
MYR 113.86 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Not Provided | [Stainless Steel] SUS304 | 25 | g6 | |
MYR 164.47 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Not Provided | [Stainless Steel] SUS304 | 32 | g6 | |
MYR 216.73 | 1 Piece(s) | Available | 8 Day(s) or more | 10 | RoHS Compliant (10 Substances) | Not Applicable | Not Provided | Not Provided | [Stainless Steel] SUS304 | 40 | g6 |
Loading...
App. Example
·Easy eccentric adjustment due to the presence of a pilot.
Basic Information
| Basic Shape | Screw Mounted | Insertion Guide Tip Shape | Round | Insertion Guide Tip Type | Flat |
|---|---|---|---|---|---|
| Insertion Guide Specifications | Screw Mounted | Mounting Side Shape | Straight (Press-Fit) |
Specification/Dimensions
-
Environmentally friendly
- RoHS Compliant (10 Substances)
-
Characteristics/Applications
- Not Applicable
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Mounting Side Outer Dia. D(mm)
-
type
- CJPEA
- CJPEIA
- GJPEA
- JPEA
- JPEIA
- SJPEA
- SJPEIA
-
Mounting Side Tolerance
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 1 Day(s) or Less
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 7 Day(s) or Less
- 8 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Large Flat Head (Press Fit)
- Locating Pins - Small Flat Head (Tapped)
- Locating Pins - Large Screw Mounted
- Locating Pins - High Hardness Stainless Steel, Small Head, Tapered (Tapped)
- Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)
- Locating Pins - Shouldered-Taper Angle (D,P Tolerance Selectable-Threaded)
- Locating Pins Small Head, Tapered, Tapped
- Locating Pins Large Head, Tapered, Configurable - Taper Angle, Tolerance Selectable, Tapped
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
Cam Follower / Solid Eccentric Cam Follower - FlatMISUMI
Standard Price : MYR 84.14-
Days to Ship : 2 Day(s) or more
-
-
Clamp Bolt With Eccentric Head, SLEC-ANABEYA BI-TECH
Standard Price : MYR 25.16-
Days to Ship : 2 Day(s) or more
-
-
Eccentric Clamp Bolt SLEC-BNABEYA BI-TECH
Standard Price : MYR 31.49
Days to Ship : 8 Day(s) or more
-
-
Eccentric Clamp Bolt - SLEC-A-ELNABEYA BI-TECH
Standard Price : MYR 27.27
Days to Ship : 5 Day(s) or more
-
Cam Follower / Solid Eccentric Cam Follower - CrownedMISUMI
Standard Price : MYR 102.85-
Days to Ship : 2 Day(s) or more
-
-
TAK Clamp (Eccentric Washer Cam Clamp)MISUMI
Standard Price : MYR 56.49-
Days to Ship : 4 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy