(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins - Tip Shape Selectable (Threaded)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
- Locating Pins - tip shape selectable (Threaded) from MISUMI.
- Insertion guide tip type can be selected 3 types, Tapered, Taper R, and Spherical.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
- The material of locating pin can be selected 4 types, SKS3 Equivalent, S45C Equivalent, SUS304, SUS440C or 13Cr stainless.
- A fully threaded type of L=0 without pivot is also available.
- Polished, centering hole is may not available for SUS304.
Part Number
Configured Part Number is shown.
Dimensional Drawing
● Round
● Diamond
a = 1.0
d = D - 0.2
[ ! ] Relief dimensions are reference values.
[!] When L < Pitch × 2, the incomplete threaded portion (Pitch × 2) is included in M × 1.5.
[!] Fully Threaded Type of L = 0 w/o Pilot is available.
[ ! ] SUS304 products may not be polished and have no centering hole.
[ ! ] For SUS440C or 13Cr stainless steel, an identification groove is provided on D part, unless the L dimension is short.
| Tip Shape | |
| A Config. |   [ ! ]R ≥ P/2 |
| B Config. |  [ ! ]G ≤ P [ ! ] When G = P, add about C0.2 chamfering |
| C Config. |  [ ! ]R ≤ P/2 Reference: tan30° ≒ 0.577, sin30° = 0.5 |
Materials Table
| Material No. | [M] Material | [S] Surface Treatment | [H] Hardness | P, L, B Configurable | P, L, B, ML Configurable | ||
| Round | Diamond | Round | Diamond | ||||
| (1) | SKS3 Equivalent | — | Treated Hardness: 55 to 60 HRC | LPAJ | LPDAJ | LPAJL | LPDAJL |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treaded Hardness: 50 to 55 HRC Plating Hardness: 750 HV or more | LPAG | LPDAG | LPAGL | LPDAGL |
| (3) | S45C Equivalent | — | Treated Hardness: 45 to 50 HRC | LPA | LPDA | LPANL | LPDAL |
| (4) | S45C Equivalent | Black Oxide | Treated Hardness: 45 to 50 HRC | LPAB | LPDAB | LPABL | LPDABL |
| (5) | S45C Equivalent | Hard Chrome Plating | Treated Hardness: 45 to 50 HRC Plating Hardness: 750 HV or more | LPAR | LPDAR | LPARL | LPDARL |
| (6) | SUS304 | — | — | LPAS | LPDAS | LPASL | LPDASL |
| (7) | SUS304 | Hard Chrome Plating | Plating Hardness: 750 HV or more | LPAD | LPDAD | LPADL | LPDADL |
| (8) | SUS440C or 13Cr Stainless Steel | — | Treated Hardness: 50 to 55 HRC | LPAC | — | LPACL | — |
Specification Table
| Part Number | — | P | — | B | — | R | — | G | — | L | — | ML |
| LPAA5 LPAJB10 LPABLB8 | — — — | P10.00 P15.00 P9.50 | — — — | B12.0 B17.0 B15.0 | — | R6 | — — | G10 G10 | — — — | L5 L10 L7 | — | ML10 |
■P, L, B Configurable
[ ! ] B dimension in ( ) is applicable to Diamond Shape
[ ! ] For full thread, specify L = 0 and NNC alteration.
*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
| Part Number | P 0.01 mm Increments | B 0.1 mm Increments | R 1 mm Increments | G 1 mm Increments | L 1 mm Increments | ML (M × 1.5) | M (Coarse) | Thread Pitch | * Tightening Torque N・cm | (W) | ||||
| Type | Tip Config. | D | D Dimension Tolerance g6 | |||||||||||
| Shape A, Shape C only | Shape B only | |||||||||||||
| A B C | 3 | −0.002 −0.008 | 4.00 to 8.00 | 3.5 to 25.0 (10.0) | Shape A R ≥ P/2 CConfig. R ≤ P/2 | Shape B G ≤ P | 0 to 10 | 4.5 | M3 | 0.5 | 98 | 1.5 | ||
| (Round) | (Diamond) | |||||||||||||
| LPAJ | LPDAJ | 4 | −0.004 −0.012 | 5.00 to 9.00 | 3.5 to 25.0 (10.0) | 6 | M4 | 0.7 | 225 | 1.8 | ||||
| LPAG | LPDAG | 5 | 6.00 to 10.00 | 3.5 to 30.0 (10.0) | 7.5 | M5 | 0.8 | 461 | 2.2 | |||||
| LPA | LPDA | 6 | 7.00 to 12.00 | 3.5 to 40.0 (12.0) | 9 | M6 | 1 | 784 | 3 | |||||
| LPAB | LPDAB | 8 | −0.005 | 9.00 to 15.00 | 3.5 to 40.0 (15.0) | 12 | M8 | 1.25 | 1911 | 3.5 | ||||
| LPAR | LPDAR | 10 | −0.014 | 11.00 to 20.00 | 5.0 to 50.0 (20.0) | 0 to 20 | 15 | M10 | 1.5 | 3783 | 4 | |||
| LPAS | LPDAS | 12 | −0.006 −0.017 | 13.00 to 20.00 | 5.0 to 50.0 (20.0) | 18 | M12 | 1.75 | 6605 | 5 | ||||
| LPAD | LPDAD | 16 | 17.00 to 27.00 | 5.0 to 50.0 (20.0) | 0 to 25 | 24 | M16 | 2 | 16366 | 7 | ||||
| LPAC | 20 | −0.007 −0.020 | 21.00 to 30.00 | 5.0 to 50.0 (20.0) | 30 | M20 | 2.5 | 32928 | 9 | |||||
[ ! ] For full thread, specify L = 0 and NNC alteration.
*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
■P, L, B, ML Configurable
[ ! ] B dimension in ( ) is applicable to Diamond Shape
[ ! ] For full thread, specify L = 0 and NNC alteration.
*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
| Part Number | P 0.01 mm Increments | B 0.1 mm Increments | R 1 mm Increments | G 1 mm Increments | L 1 mm Increments | ML 1 mm Increments | M (Coarse) | Thread Pitch | * Tightening Torque N・cm | (W) | ||||
| Type | Tip Config. | D | D Dimension Tolerance g6 | |||||||||||
| Shape A, Shape C only | Shape B only | |||||||||||||
| A B C | 3 | −0.002 −0.008 | 4.00 to 8.00 | 3.5 to 25.0 (10.0) | Shape A R ≥ P/2 Shape C R ≤ P/2 | Shape B G ≤ P | 0 to 12 | 3 to 9 | M3 | 0.5 | 98 | 1.5 | ||
| (Round) | (Diamond) | |||||||||||||
| LPAJL | LPDAJL | 4 | −0.004 −0.012 | 5.00 to 9.00 | 3.5 to 25.0 (10.0) | 4 to 12 | M4 | 0.7 | 225 | 1.8 | ||||
| LPAGL | LPDAGL | 5 | 6.00 to 10.00 | 3.5 to 30.0 (10.0) | 0 to 15 | 5 to 15 | M5 | 0.8 | 461 | 2.2 | ||||
| LPANL | LPDAL | 6 | 7.00 to 12.00 | 3.5 to 40.0 (12.0) | 6 to 18 | M6 | 1 | 784 | 3 | |||||
| LPABL | LPDABL | 8 | −0.005 | 9.00 to 15.00 | 3.5 to 40.0 (15.0) | 8 to 24 | M8 | 1.25 | 1911 | 3.5 | ||||
| LPARL | LPDARL | 10 | −0.014 | 11.00 to 20.00 | 5.0 to 50.0 (20.0) | 0 to 20 | 10 to 30 | M10 | 1.5 | 3783 | 4 | |||
| LPASL | LPDASL | 12 | −0.006 −0.017 | 13.00 to 20.00 | 5.0 to 50.0 (20.0) | 12 to 30 | M12 | 1.75 | 6605 | 5 | ||||
| LPADL | LPDADL | 16 | 17.00 to 27.00 | 5.0 to 50.0 (20.0) | 0 to 25 | 16 to 40 | M16 | 2 | 16366 | 7 | ||||
| LPACL | 20 | −0.007 −0.020 | 21.00 to 30.00 | 5.0 to 50.0 (20.0) | 20 to 40 | M20 | 2.5 | 32928 | 9 | |||||
[ ! ] For full thread, specify L = 0 and NNC alteration.
*The tightening torque (ref. value) for hardened products is strength class 8.8. Not applicable when using locking materials or lock washers.
Alterations
| Alterations Code | Alteration Details | Application Conditions | Ordering Example |
| SC | Adds Wrench Flats | SC = 1 mm Increments [ ! ]P-3 ≤ SC ≤ P-1,SC ≥ D [ ! ] When B ≤ 11, adds wrench flats on the tip [NG] Not applicable to Diamond Shape | LPAA5-P10.00-B12.0-R6-L5-SC8 |
| LAC | Adds a wrench hole (⌀3.5) | ø3.5 Hole Machining [ ! ] Applicable when B ≥ 10, P ≥ 8 [NG] Not applicable to Diamond Shape | LPAA5-P10.00-B12.0-R6-L5-LAC |
| LTE | Adds a wrench hole (⌀2.5) | ø2.5 Hole Machining [ ! ] Applicable when B ≥ 8, 7 ≤ P ≤ 15 [NG] Not applicable to Diamond Shape | LPAA5-P10.00-B12.0-R6-L5-LTE |
| DRC | Screwdriver Slot | [ ! ] Width 0.8 mm Depth 1 mm | LPAA5-P10.00-B12.0-R6-L5-DRC |
| MC | Changes the thread diameter | [ ! ]D/3 ≤ MC < D [ ! ]MC ≥ 3 [ ! ] The incomplete threaded portion (Pitch × 2) is included. [NG] P, L, B, ML Configurable Types are not applicable | LPAA5-P10.00-B12.0-R6-L5-MC4 |
| NNC | Adds Relief | [ ! ] Applicable when L = 0 | LPAA5-P10.00-B12.0-R6-L0-NNC |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| LPADA3-P[5-6/0.01]-B[5-25/0.1]-R[2-500/1]-L[0-10/1] |
| LPADA4-P[5-9/0.01]-B[5-25/0.1]-R[2-500/1]-L[0-10/1] |
| LPADA5-P[6-10/0.01]-B[5-30/0.1]-R[3-500/1]-L[0-10/1] |
| LPADA6-P[8-12/0.01]-B[5-40/0.1]-R[4-500/1]-L[0-10/1] |
| LPADA8-P[10-15/0.01]-B[5-40/0.1]-R[5-500/1]-L[0-10/1] |
| LPADA10-P[12-20/0.01]-B[5-50/0.1]-R[6-500/1]-L[0-10/1] |
| LPADA12-P[16-20/0.01]-B[5-50/0.1]-R[9-500/1]-L[0-10/1] |
| LPADA16-P[18-24/0.01]-B[5-50/0.1]-R[9-500/1]-L[0-10/1] |
| LPADA20-P[22-30/0.01]-B[5-50/0.1]-R[11-500/1]-L[0-10/1] |
| LPADB3-P[5-6/0.01]-B[5-25/0.1]-G[1-6/1]-L[0-10/1] |
| LPADB4-P[5-9/0.01]-B[5-25/0.1]-G[1-9/1]-L[0-10/1] |
| LPADB5-P[6-10/0.01]-B[5-30/0.1]-G[1-10/1]-L[0-10/1] |
| LPADB6-P[8-12/0.01]-B[5-40/0.1]-G[1-12/1]-L[0-10/1] |
| LPADB8-P[10-15/0.01]-B[5-40/0.1]-G[1-15/1]-L[0-10/1] |
| LPADB10-P[12-20/0.01]-B[5-50/0.1]-G[1-20/1]-L[0-10/1] |
| LPADB12-P[16-20/0.01]-B[5-50/0.1]-G[1-20/1]-L[0-10/1] |
| LPADB16-P[18-24/0.01]-B[5-50/0.1]-G[1-24/1]-L[0-10/1] |
| LPADB20-P[22-30/0.01]-B[5-50/0.1]-G[1-30/1]-L[0-10/1] |
| LPADC3-P[5-6/0.01]-B[5-25/0.1]-R[1-3/1]-L[0-10/1] |
| LPADC4-P[5-9/0.01]-B[5-25/0.1]-R[1-4/1]-L[0-10/1] |
| LPADC5-P[6-10/0.01]-B[5-30/0.1]-R[1-5/1]-L[0-10/1] |
| LPADC6-P[8-12/0.01]-B[5-40/0.1]-R[1-6/1]-L[0-10/1] |
| LPADC8-P[10-15/0.01]-B[5-40/0.1]-R[1-7/1]-L[0-10/1] |
| LPADC10-P[12-20/0.01]-B[5-50/0.1]-R[1-10/1]-L[0-10/1] |
| LPADC12-P[16-20/0.01]-B[5-50/0.1]-R[1-10/1]-L[0-10/1] |
| LPADC16-P[18-24/0.01]-B[5-50/0.1]-R[1-12/1]-L[0-10/1] |
| LPADC20-P[22-30/0.01]-B[5-50/0.1]-R[1-15/1]-L[0-10/1] |
| LPAGA3-P[5-6/0.01]-B[5-25/0.1]-R[2-500/1]-L[0-10/1] |
| LPAGA4-P[5-9/0.01]-B[5-25/0.1]-R[2-500/1]-L[0-10/1] |
| LPAGA5-P[6-10/0.01]-B[5-30/0.1]-R[3-500/1]-L[0-10/1] |
| LPAGA6-P[8-12/0.01]-B[5-40/0.1]-R[4-500/1]-L[0-10/1] |
| LPAGA8-P[10-15/0.01]-B[5-40/0.1]-R[5-500/1]-L[0-10/1] |
| LPAGA10-P[12-20/0.01]-B[5-50/0.1]-R[6-500/1]-L[0-10/1] |
| LPAGA12-P[16-20/0.01]-B[5-50/0.1]-R[9-500/1]-L[0-10/1] |
| LPAGA16-P[18-24/0.01]-B[5-50/0.1]-R[9-500/1]-L[0-10/1] |
| LPAGA20-P[22-30/0.01]-B[5-50/0.1]-R[11-500/1]-L[0-10/1] |
| LPAGB3-P[5-6/0.01]-B[5-25/0.1]-G[1-6/1]-L[0-10/1] |
| LPAGB4-P[5-9/0.01]-B[5-25/0.1]-G[1-9/1]-L[0-10/1] |
| LPAGB5-P[6-10/0.01]-B[5-30/0.1]-G[1-10/1]-L[0-10/1] |
| LPAGB6-P[8-12/0.01]-B[5-40/0.1]-G[1-12/1]-L[0-10/1] |
| LPAGB8-P[10-15/0.01]-B[5-40/0.1]-G[1-15/1]-L[0-10/1] |
| LPAGB10-P[12-20/0.01]-B[5-50/0.1]-G[1-20/1]-L[0-10/1] |
| LPAGB12-P[16-20/0.01]-B[5-50/0.1]-G[1-20/0.1]-L[0-10/1] |
| LPAGB16-P[18-24/0.01]-B[5-50/0.1]-G[1-24/1]-L[0-10/1] |
| LPAGB20-P[22-30/0.01]-B[5-50/0.1]-G[1-30/1]-L[0-10/1] |
| LPAGC3-P[5-6/0.01]-B[5-25/0.1]-R[1-3/1]-L[0-10/1] |
| LPAGC4-P[5-9/0.01]-B[5-25/0.1]-R[1-4/1]-L[0-10/1] |
| LPAGC5-P[6-10/0.01]-B[3.5-30/0.1]-R[1-5/1]-L[0-15/1] |
| LPAGC6-P[8-12/0.01]-B[5-40/0.1]-R[1-6/1]-L[0-10/1] |
| LPAGC8-P[10-15/0.01]-B[5-40/0.1]-R[1-7/1]-L[0-10/1] |
| LPAGC10-P[12-20/0.01]-B[5-50/0.1]-R[1-10/1]-L[0-10/1] |
| LPAGC12-P[16-20/0.01]-B[5-50/0.1]-R[1-10/1]-L[0-10/1] |
| LPAGC16-P[18-24/0.01]-B[5-50/0.1]-R[1-12/1]-L[0-10/1] |
| LPAGC20-P[22-30/0.01]-B[5-50/0.1]-R[1-15/1]-L[0-10/1] |
| LPARA3-P[5-6/0.01]-B[10-25/0.1]-R[2-500/1]-L[0-10/1] |
| LPARA4-P[5-9/0.01]-B[10-25/0.1]-R[2-500/1]-L[0-10/1] |
| LPARA5-P[6-10/0.01]-B[10-30/0.1]-R[3-500/1]-L[0-10/1] |
| LPARA6-P[8-12/0.01]-B[10-40/0.1]-R[3-500/1]-L[0-10/1] |
| LPARA8-P[10-15/0.01]-B[10-40/0.1]-R[4-500/1]-L[0-10/1] |
| LPARA10-P[12-20/0.01]-B[10-50/0.1]-R[5-500/1]-L[0-10/1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Shape | Material Details | Insertion Guide Tip Type | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Section Length L (mm) | G (mm) | Positioning Part Length B (mm) | R (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 5 ～ 6 | 3 | 0 ～ 10 | - | 5 ～ 25 | 2 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 5 ～ 9 | 4 | 0 ～ 10 | - | 5 ～ 25 | 2 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 6 ～ 10 | 5 | 0 ～ 10 | - | 5 ～ 30 | 3 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 8 ～ 12 | 6 | 0 ～ 10 | - | 5 ～ 40 | 4 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 10 ～ 15 | 8 | 0 ～ 10 | - | 5 ～ 40 | 5 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 12 ～ 20 | 10 | 0 ～ 10 | - | 5 ～ 50 | 6 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 16 ～ 20 | 12 | 0 ～ 10 | - | 5 ～ 50 | 9 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 18 ～ 24 | 16 | 0 ～ 10 | - | 5 ～ 50 | 9 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 22 ～ 30 | 20 | 0 ～ 10 | - | 5 ～ 50 | 11 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 5 ～ 6 | 3 | 0 ～ 10 | 1 ～ 6 | 5 ～ 25 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 5 ～ 9 | 4 | 0 ～ 10 | 1 ～ 9 | 5 ～ 25 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 6 ～ 10 | 5 | 0 ～ 10 | 1 ～ 10 | 5 ～ 30 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 8 ～ 12 | 6 | 0 ～ 10 | 1 ～ 12 | 5 ～ 40 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 10 ～ 15 | 8 | 0 ～ 10 | 1 ～ 15 | 5 ～ 40 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 12 ～ 20 | 10 | 0 ～ 10 | 1 ～ 20 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 16 ～ 20 | 12 | 0 ～ 10 | 1 ～ 20 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 18 ～ 24 | 16 | 0 ～ 10 | 1 ～ 24 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 22 ～ 30 | 20 | 0 ～ 10 | 1 ～ 30 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 5 ～ 6 | 3 | 0 ～ 10 | - | 5 ～ 25 | 1 ～ 3 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 5 ～ 9 | 4 | 0 ～ 10 | - | 5 ～ 25 | 1 ～ 4 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 6 ～ 10 | 5 | 0 ～ 10 | - | 5 ～ 30 | 1 ～ 5 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 8 ～ 12 | 6 | 0 ～ 10 | - | 5 ～ 40 | 1 ～ 6 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 10 ～ 15 | 8 | 0 ～ 10 | - | 5 ～ 40 | 1 ～ 7 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 12 ～ 20 | 10 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 16 ～ 20 | 12 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 18 ～ 24 | 16 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SUS304 | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Not Provided | [Stainless Steel] SUS304 | 22 ～ 30 | 20 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 15 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5 ～ 6 | 3 | 0 ～ 10 | - | 5 ～ 25 | 2 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5 ～ 9 | 4 | 0 ～ 10 | - | 5 ～ 25 | 2 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6 ～ 10 | 5 | 0 ～ 10 | - | 5 ～ 30 | 3 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 8 ～ 12 | 6 | 0 ～ 10 | - | 5 ～ 40 | 4 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 10 ～ 15 | 8 | 0 ～ 10 | - | 5 ～ 40 | 5 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 12 ～ 20 | 10 | 0 ～ 10 | - | 5 ～ 50 | 6 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 16 ～ 20 | 12 | 0 ～ 10 | - | 5 ～ 50 | 9 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 18 ～ 24 | 16 | 0 ～ 10 | - | 5 ～ 50 | 9 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | 0 ～ 10 | - | 5 ～ 50 | 11 ～ 500 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5 ～ 6 | 3 | 0 ～ 10 | 1 ～ 6 | 5 ～ 25 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5 ～ 9 | 4 | 0 ～ 10 | 1 ～ 9 | 5 ～ 25 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6 ～ 10 | 5 | 0 ～ 10 | 1 ～ 10 | 5 ～ 30 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 8 ～ 12 | 6 | 0 ～ 10 | 1 ～ 12 | 5 ～ 40 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 10 ～ 15 | 8 | 0 ～ 10 | 1 ～ 15 | 5 ～ 40 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 12 ～ 20 | 10 | 0 ～ 10 | 1 ～ 20 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 16 ～ 20 | 12 | 0 ～ 10 | 1 ～ 20 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 18 ～ 24 | 16 | 0 ～ 10 | 1 ～ 24 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Tapered | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | 0 ～ 10 | 1 ～ 30 | 5 ～ 50 | - | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5 ～ 6 | 3 | 0 ～ 10 | - | 5 ～ 25 | 1 ～ 3 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 5 ～ 9 | 4 | 0 ～ 10 | - | 5 ～ 25 | 1 ～ 4 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 6 ～ 10 | 5 | 0 ～ 15 | - | 3.5 ～ 30 | 1 ～ 5 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 8 ～ 12 | 6 | 0 ～ 10 | - | 5 ～ 40 | 1 ～ 6 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 10 ～ 15 | 8 | 0 ～ 10 | - | 5 ～ 40 | 1 ～ 7 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 12 ～ 20 | 10 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 16 ～ 20 | 12 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 10 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 18 ～ 24 | 16 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 12 | ||
- | 1 Piece(s) | 4 Day(s) | 10 | Round | SKS3 (Including equivalent materials) | Taper R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | 0 ～ 10 | - | 5 ～ 50 | 1 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Round | S45C (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] S45C Equivalent | 5 ～ 6 | 3 | 0 ～ 10 | - | 10 ～ 25 | 2 ～ 500 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Round | S45C (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] S45C Equivalent | 5 ～ 9 | 4 | 0 ～ 10 | - | 10 ～ 25 | 2 ～ 500 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Round | S45C (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] S45C Equivalent | 6 ～ 10 | 5 | 0 ～ 10 | - | 10 ～ 30 | 3 ～ 500 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Round | S45C (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] S45C Equivalent | 8 ～ 12 | 6 | 0 ～ 10 | - | 10 ～ 40 | 3 ～ 500 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Round | S45C (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] S45C Equivalent | 10 ～ 15 | 8 | 0 ～ 10 | - | 10 ～ 40 | 4 ～ 500 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Round | S45C (Including equivalent materials) | R | [Hard Chrome Plating] Hard Chrome Plating | Dip Quenching | [Steel] S45C Equivalent | 12 ～ 20 | 10 | 0 ～ 10 | - | 10 ～ 50 | 5 ～ 500 |
Loading...
Basic Information
| Basic Shape | Large Head | Insertion Guide Specifications | Not Provided | Mounting Side Shape | Threaded |
|---|---|---|---|---|---|
| Locating Side O.D. Tolerance | 0/-0.01 | Mounting Side Tolerance | g6 |
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Material Details
- SUS304
- SUS440C or 13Cr Stainless Steel
- SKS3 (Including equivalent materials)
- S45C (Including equivalent materials)
-
Insertion Guide Tip Type
-
Tapered -
Taper R -
R
-
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Section Length L(mm)
-
G(mm)
-
Positioning Part Length B(mm)
-
R(mm)
-
type
- LPAA
- LPAB
- LPABA
- LPABB
- LPABC
- LPAC
- LPACA
- LPACB
- LPACC
- LPADA
- LPADB
- LPADC
- LPAGA
- LPAGB
- LPAGC
- LPAJA
- LPAJB
- LPAJC
- LPARA
- LPARB
- LPARC
- LPASA
- LPASB
- LPASC
- LPDAA
- LPDAB
- LPDABA
- LPDABB
- LPDABC
- LPDAC
- LPDADA
- LPDADB
- LPDADC
- LPDAGA
- LPDAGB
- LPDAGC
- LPDAJA
- LPDAJB
- LPDAJC
- LPDARA
- LPDARB
- LPDARC
- LPDASA
- LPDASB
- LPDASC
-
Surface Treatment
- Not Provided
- Black Oxide
- Hard Chrome Plating
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Plate Centering Pins
- Locating Pins - Large Head, Bullet Nose, Compact - Press Fit
- Locating Pins - Pilot Pins - Tapped
- Large Head Locating Pins - Tapered
- Locating Pins Large Head, Tapered, Screw Mounted, Standard/Compact
- Locating Pins Large Head, Spherical, Threaded
- Locating Pins Shouldered, Tapered, Configurable
- Guide Pins
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
Locating Pins-High Hardness Stainless Steel/R/Taper R/ThreadedMISUMI
Days to Ship : 6 Day(s) or more
-
Locating Pins - Tip Shape Selectable (Tip Length Configurable-Threaded)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
Locating Pins - Tip Shape Selectable (Configurable Shoulder Thickness-Threaded)MISUMI
Days to Ship : 4 Day(s) or more
-
-
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy