(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins - Small Flat Head (Press Fit)
- Volume Discount
Flat Head Type. Suitable if the mating side has limited space.
(i)Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
* The insertion guide is applicable to tolerance p6 only.
When P<3
a=0.5
d=P-0.1/p>
When P≥3
a=1.0
d=P-0.2
[ ! ]Relief dimension is a reference value.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When D=P, relief is also applied.
| Material No. | [ M ]Material | [ S ] Surface Treatment | [ H ]Hardness | Type | D Tolerance Code | |
| P Selectable | P, L, B Configurable | |||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60~63HRC | JPDB | FPDS | C (m6) PC (p6) |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50~55HRC Plating Hardness: 750HV ~ | - | GFPDS | |
| (3) | SKS3 Equivalent | - | - | - | BFPDS | |
| (4) | SUS304* | - | - | SJPDB | SFPDS | |
| (5) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV ~ | - | - | |
| (6) | SUS440C or 13Cr stainless | - | Treated Hardness: 50~55HRC | - | CFPDS | |
Specifications
| Part Number | - | P | - | L | - | B |
| JPDBC4 FPDSC4 | - - | 2 P2.01 | - | L6 | - | B5.5 |
■P dim. Tolerance Table
| P | h6 |
| 1.50~3.00 | 0 -0.006 |
| 3.01~6.00 | 0 -0.008 |
| 6.01~10.00 | 0 -0.009 |
| 10.01~18.00 | 0 -0.011 |
| 18.01~20.00 | 0 -0.013 |
■P Selectable
| Part Number | P Selection | L | B | ℓ | C | Unit Price | |||||||||||||
| Type | D Tol. | D | D dim. Tolerance | (1)Treated SKS3 JPDBC JPDBPC | (4)SUS304 SJPDBC SJPDBPC | ||||||||||||||
| m6 | p6 | ||||||||||||||||||
| JPDB SJPDB | C (m6) PC (p6) | 3 | +0.008 +0.002 | +0.012 +0.006 | 2 | 5 | 3 | 1 | 0.1 | ||||||||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 2 | 3 | 0.5 | ||||||||||||||
| 5 | 2 | 3 | 4 | 8 | |||||||||||||||
| 6 | 3 | 4 | 5 | 10 | 4 | ||||||||||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 4 | 5 | 6 | 12 | 2 | 1 | |||||||||||
| 10 | 5 | 6 | 7 | 8 | 16 | 5 | |||||||||||||
| 16 | +0.018 +0.007 | +0.029 +0.018 | 10 | 13 | 22 | 12 | 3 | ||||||||||||
■P, L, B Configurable
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | ℓ | C | Unit Price | ||||||||
| Type | D Tol. | D | D dim. Tolerance | (1) Treated SKS3 FPDSC FPDSPC | (2) Hard SKS3 GFPDSC GFPDSPC | (3) SKS3 BFPDSC BFPDSPC | (4) SUS304 SFPDSC SFPDSPC | (6) SUS440C or 13Cr stainless CFPDSC CFPDSPC | ||||||
| m6 | p6 | |||||||||||||
| FPDS GFPDS BFPDS SFPDS CFPDS | C (m6) PC (p6) | 2 | +0.008 +0.002 | +0.012 +0.006 | 1.50~2.00 | 2~5 | 3.0~10.0 | 0 | 0.1 | |||||
| 3 | 1.50~3.00 | 3~10 | 3.0~10.0 | 1 | ||||||||||
| 4 | +0.012 +0.004 | +0.020 +0.012 | 1.50~4.00 | 4~10 | 4.0~10.0 | 0.5 | ||||||||
| 5 | 2.00~5.00 | 5~10 | 4.0~15.0 | |||||||||||
| 6 | 2.00~6.00 | 5~17 | 4.0~15.0 | |||||||||||
| 8 | +0.015 +0.006 | +0.024 +0.015 | 3.00~8.00 | 8~21 | 6.0~20.0 | 2 | 1 | |||||||
| 10 | 3.00~10.00 | 10~23 | 6.0~20.0 | |||||||||||
| 12 | +0.018 +0.007 | +0.029 +0.018 | 5.00~12.00 | 12~24 | 6.0~30.0 | 1.5 | ||||||||
| 13 | 6.00~13.00 | 13~26 | 6.0~30.0 | 2 | ||||||||||
| 16 | 10.00~16.00 | 16~32 | 7.0~30.0 | 3 | ||||||||||
| 20 | +0.021 +0.008 | +0.035 +0.022 | 13.00~20.00 | 20~40 | 7.0~30.0 | |||||||||
Alterations
| Part Number | - | P | - | L | - | B | - | (RC, CN) |
| FPDSC4 | - | P2.00 | - | L6 | - | B5.5 | - | RC |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| BFPDSC2-P[1.5-2/0.01]-L[2-4/1]-B[3-10/0.1] |
| BFPDSC3-P[1.5-3/0.01]-L[3-6/1]-B[3-10/0.1] |
| BFPDSC4-P[2-4/0.01]-L[4-8/1]-B[4-10/0.1] |
| BFPDSC5-P[2-5/0.01]-L[5-10/1]-B[4-10/0.1] |
| BFPDSC6-P[2-6/0.01]-L[6-12/1]-B[4-12/0.1] |
| BFPDSC8-P[3-8/0.01]-L[8-16/1]-B[6-15/0.1] |
| BFPDSC10-P[3-10/0.01]-L[10-20/1]-B[6-20/0.1] |
| BFPDSC12-P[5-12/0.01]-L[12-24/1]-B[6-20/0.1] |
| BFPDSC13-P[6-13/0.01]-L[13-26/1]-B[6-20/0.1] |
| BFPDSC16-P[10-16/0.01]-L[16-32/1]-B[7-20/0.1] |
| BFPDSC20-P[13-20/0.01]-L[20-40/1]-B[7-20/0.1] |
| BFPDSPC2-P[1.5-2/0.01]-L[2-4/1]-B[3-10/0.1] |
| BFPDSPC3-P[1.5-3/0.01]-L[3-6/1]-B[3-10/0.1] |
| BFPDSPC4-P[2-4/0.01]-L[4-8/1]-B[4-10/0.1] |
| BFPDSPC5-P[2-5/0.01]-L[5-10/1]-B[4-10/0.1] |
| BFPDSPC6-P[2-6/0.01]-L[6-12/1]-B[4-12/0.1] |
| BFPDSPC8-P[3-8/0.01]-L[8-16/1]-B[6-15/0.1] |
| BFPDSPC10-P[3-10/0.01]-L[10-20/1]-B[6-20/0.1] |
| BFPDSPC12-P[5-12/0.01]-L[12-24/1]-B[6-20/0.1] |
| BFPDSPC13-P[6-13/0.01]-L[13-26/1]-B[6-20/0.1] |
| BFPDSPC16-P[10-16/0.01]-L[16-32/1]-B[7-20/0.1] |
| BFPDSPC20-P[13-20/0.01]-L[20-40/1]-B[7-20/0.1] |
| BJPDSC2-[1.5-2/0.01] |
| BJPDSC3-[1.5-3/0.01] |
| BJPDSC4-[2-4/0.01] |
| BJPDSC5-[2-5/0.01] |
| BJPDSC6-[2-6/0.01] |
| BJPDSC8-[3-8/0.01] |
| BJPDSC10-[3-10/0.01] |
| BJPDSC12-[5-12/0.01] |
| BJPDSC13-[6-13/0.01] |
| BJPDSC16-[10-16/0.01] |
| BJPDSC20-[13-20/0.01] |
| BJPDSPC2-[1.5-2/0.01] |
| BJPDSPC3-[1.5-3/0.01] |
| BJPDSPC4-[2-4/0.01] |
| BJPDSPC5-[2-5/0.01] |
| BJPDSPC6-[2-6/0.01] |
| BJPDSPC8-[3-8/0.01] |
| BJPDSPC10-[3-10/0.01] |
| BJPDSPC12-[5-12/0.01] |
| BJPDSPC13-[6-13/0.01] |
| BJPDSPC16-[10-16/0.01] |
| BJPDSPC20-[13-20/0.01] |
| CFPDSC2-P[1.5-2/0.01]-L[2-4/1]-B[3-10/0.1] |
| CFPDSC3-P[1.5-3/0.01]-L[3-6/1]-B[3-10/0.1] |
| CFPDSC4-P[2-4/0.01]-L[4-8/1]-B[4-10/0.1] |
| CFPDSC5-P[2-5/0.01]-L[5-10/1]-B[4-10/0.1] |
| CFPDSC6-P[2-6/0.01]-L[5-17/1]-B[4-15/0.1] |
| CFPDSC8-P[3-8/0.01]-L[8-21/1]-B[6-20/0.1] |
| CFPDSC10-P[3-10/0.01]-L[10-23/1]-B[6-20/0.1] |
| CFPDSC12-P[5-12/0.01]-L[12-24/1]-B[6-30/0.1] |
| CFPDSC13-P[6-13/0.01]-L[13-26/1]-B[6-30/0.1] |
| CFPDSC16-P[10-16/0.01]-L[16-32/1]-B[7-30/0.1] |
| CFPDSC20-P[13-20/0.01]-L[20-40/1]-B[7-30/0.1] |
| CFPDSPC2-P[1.5-2/0.01]-L[2-4/1]-B[3-10/0.1] |
| CFPDSPC3-P[1.5-3/0.01]-L[3-6/1]-B[3-10/0.1] |
| CFPDSPC4-P[2-4/0.01]-L[4-8/1]-B[4-10/0.1] |
| CFPDSPC5-P[2-5/0.01]-L[5-10/1]-B[4-10/0.1] |
| CFPDSPC6-P[2-6/0.01]-L[6-12/1]-B[4-12/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | Mounting Section Length L (mm) | Positioning Part Length B (mm) | Dimension Configurable Type | Positioning Part Length B (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 2 | 2 | m6 | 2 ～ 4 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 3 | 3 | m6 | 3 ～ 6 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 4 | 4 | m6 | 4 ～ 8 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 5 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 6 | 6 | m6 | 6 ～ 12 | - | P, L, B Configurable | 4 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 8 | 8 | m6 | 8 ～ 16 | - | P, L, B Configurable | 6 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 10 | 10 | m6 | 10 ～ 20 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 5 ～ 12 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6 ～ 13 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 10 ～ 16 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 7 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 20 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 7 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 2 | 2 | p6 | 2 ～ 4 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 3 | 3 | p6 | 3 ～ 6 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 4 | 4 | p6 | 4 ～ 8 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 5 | 5 | p6 | 5 ～ 10 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 6 | 6 | p6 | 6 ～ 12 | - | P, L, B Configurable | 4 ～ 12 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 8 | 8 | p6 | 8 ～ 16 | - | P, L, B Configurable | 6 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 10 | 10 | p6 | 10 ～ 20 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 5 ～ 12 | 12 | p6 | 12 ～ 24 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6 ～ 13 | 13 | p6 | 13 ～ 26 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 10 ～ 16 | 16 | p6 | 16 ～ 32 | - | P, L, B Configurable | 7 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 20 | 20 | p6 | 20 ～ 40 | - | P, L, B Configurable | 7 ～ 20 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 2 | 2 | m6 | 4 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 3 | 3 | m6 | 5 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 4 | 4 | m6 | 5 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 5 | 5 | m6 | 8 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 6 | 6 | m6 | 10 | 4 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 8 | 8 | m6 | 12 | 4 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 10 | 10 | m6 | 16 | 5 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 5 ～ 12 | 12 | m6 | 20 | 6 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6 ～ 13 | 13 | m6 | 22 | 10 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 10 ～ 16 | 16 | m6 | 22 | 12 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 20 | 20 | m6 | 30 | 20 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 2 | 2 | p6 | 4 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 1.5 ～ 3 | 3 | p6 | 5 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 4 | 4 | p6 | 5 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 5 | 5 | p6 | 8 | 3 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 2 ～ 6 | 6 | p6 | 10 | 4 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 8 | 8 | p6 | 12 | 4 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 3 ～ 10 | 10 | p6 | 16 | 5 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 5 ～ 12 | 12 | p6 | 20 | 6 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 6 ～ 13 | 13 | p6 | 22 | 10 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 10 ～ 16 | 16 | p6 | 22 | 12 | P Configurable | - | ||
- | 1 Piece(s) | 7 Day(s) | 10 | Not Provided | Not Provided | [Steel] SKS3 Equivalent | 13 ～ 20 | 20 | p6 | 30 | 20 | P Configurable | - | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1.5 ～ 2 | 2 | m6 | 2 ～ 4 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1.5 ～ 3 | 3 | m6 | 3 ～ 6 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 4 | m6 | 4 ～ 8 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 6 | m6 | 5 ～ 17 | - | P, L, B Configurable | 4 ～ 15 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 8 | 8 | m6 | 8 ～ 21 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 3 ～ 10 | 10 | m6 | 10 ～ 23 | - | P, L, B Configurable | 6 ～ 20 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5 ～ 12 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 6 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6 ～ 13 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 6 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 10 ～ 16 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 7 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 20 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 7 ～ 30 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1.5 ～ 2 | 2 | p6 | 2 ～ 4 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 1.5 ～ 3 | 3 | p6 | 3 ～ 6 | - | P, L, B Configurable | 3 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 4 | 4 | p6 | 4 ～ 8 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 5 | 5 | p6 | 5 ～ 10 | - | P, L, B Configurable | 4 ～ 10 | ||
- | 1 Piece(s) | 3 Day(s) | 10 | Not Provided | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 2 ～ 6 | 6 | p6 | 6 ～ 12 | - | P, L, B Configurable | 4 ～ 12 |
Loading...
Basic Information
| Basic Shape | Small Head | Insertion Guide Tip Shape | Round | Insertion Guide Tip Type | Flat |
|---|---|---|---|---|---|
| Insertion Guide Specifications | Not Provided | Mounting Side Shape | Straight (Press-Fit) | Locating Side O.D. Tolerance | h6 |
Specification/Dimensions
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
Mounting Section Length L(mm)
-
Positioning Part Length B(mm)
-
Dimension Configurable Type
- P Configurable
- P Selectable
- P, L, B Configurable
-
Positioning Part Length B(mm)
-
type
- BFPDSC
- BFPDSPC
- BJPDSC
- BJPDSPC
- CFPDSC
- CFPDSPC
- CJPDBC
- CJPDBPC
- CJPDSC
- CJPDSPC
- FPDSC
- FPDSPC
- GFPDSC
- GFPDSPC
- HFPDSC
- HFPDSPC
- JPDBC
- JPDBPC
- SFPDSC
- SFPDSPC
- SJPDBC
- SJPDBPC
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 3 Day(s) or Less
- 4 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Feed Pins - Solid - Tapped
- Locating Pins - Small Head, Round Tapered - Tapped
- Locating Pins - Large Flat Head - Side Locating - Tapped
- Locating Pins - Large Head Tapered (Plastic Tip - Press Fit)
- Locating Pins - Large Head, Tapered - Nonmagnetic - Threaded
- Locating Pins - Shouldered (Tapered - Shoulder Thickness Configurable-Tapped)
- Locating Pins Large Head, Spherical, Threaded
- Locating Pin Large Head, Flat End Type, Standard type
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
Locating Pins - Small Flat Head (D,P Tolerance Selectable-Press Fit)MISUMI
Days to Ship : 3 Day(s) or more
-
-
-
-
-
Small Diameter Locating Pins - High Hardness Stainless Steel - Small HeadMISUMI
Days to Ship : 6 Day(s) or more
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy