(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Locating Pins - Sphere Large Head (Press Fit) (Part Numbers)
- Volume Discount
- Locating Pins - Sphere Large Head (Press Fit) from MISUMI.
- The Sphere Head can prevent the mating material from being scratched even when you insert by sliding horizontally against the pin end.
- The material of locating pin can be selected 3 types, steel SKS3 Equivalent, stainless steel SUS304, SUS440C or 13Cr stainless.
- Polished, centering hole is sometimes not available for SUS304.
- SUS440C or 13Cr stainless has an identification groove at any position on D part.
- Insertion guide tip shape can be selected 2 types, round, and diamond.
(i)Caution
- The appearances of some products may be changed starting from August 2025. See the link below for details.
Information on Locating Pin Appearance Change - Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
(Round)
(Diamond)
[ ! ]Buffed at 
part only.
(Except Diamond Cut Surface)
The boundary between Sphere part and B dimension is indistinct.
When D<3
a＝0.5
d＝D－0.1
[ ! ]Relief dimension is a reference value.
When D≥3
a＝1.0
d＝D－0.2
* The insertion guide is applicable to tolerance p6 only.
[ ! ]SUS440C or 13Cr stainless has an identification groove at any position on D part.
[ ! ]Polishing and centering hole may not be provided.
[ ! ]When the P dimension is small, a centering hole will cause the sphere section to become small.
[ ! ]The spherical head may be polished.
[ ! ]Locating Pins for Height Adjusting with shorter B fixed dimension is also available.
| Material No. | [ M ]Material | [ S ]Surface Treatment | [ H ]Hardness | P Selectable | P, L, B Configurable | ||
| Type | D Tolerance and Shape | Type | D Tolerance and Shape | ||||
| (1) | SKS3 Equivalent | - | Treated Hardness: 60 ~ 63HRC | JPQ | < Round > B (m6) PB (p6) | FPQ | < Round > A (m6) PA (p6) < Diamond > D (m6) PD (p6) |
| (2) | SKS3 Equivalent | Hard Chrome Plating | Treated Hardness: 50 ~ 55HRC / Plating Hardness: 750HV ~ | - | GFPQ | ||
| (3) | SUS304* | - | - | SJPQ | SFPQ | ||
| (4) | SUS304 | Hard Chrome Plating | Plating Hardness: 750HV ~ | - | HFPQ | ||
| (5) | SUS440C or 13Cr stainless | - | Treated Hardness: 50 ~ 55HRC | CJPQ | CFPQ | ||
| (6) | SKS3 Equivalent | Buffing | Treated Hardness: 60 ~ 63HRC | - | MFPQ | ||
| (7) | SKS3 Equivalent | Hard Chrome Plating + Buffing | Treated Hardness: 50 ~ 55HRC / Plating Hardness: 750HV ~ | - | MGFPQ | ||
| (8) | SUS440C or 13Cr stainless | Buffing | Treated Hardness: 50 ~ 55HRC | - | MCFPQ | ||
Specifications
| Part Number | - | P | - | L | - | B | ||||
| Type | D Tol. | D | ||||||||
| JPQ FPQ MFPQ | B A PA | 4 4 12 | - - - | 5 P5.00 P15.98 | - - | L5 L12 | - - | B2.5 B5.5 | ||
■P Selectable
■P, L, B Configurable
[ ! ] P, L, B dimensions in ( ) are applicable to Diamond Shape.
| Part Number | P Selection | L | B | C | ℓ | |||||||||||||||
| Type | D Tolerance and Shape | D | D Tol. | |||||||||||||||||
| m6 | p6 | |||||||||||||||||||
| JPQ SJPQ CJPQ | < Round > B (m6) PB (p6) | 1 | +0.008 +0.002 | +0.012 +0.006 | 2 | 3 | 3 | 0.1 | 0 | |||||||||||
2 | 3 | 4 | 4 | 0.5 | ||||||||||||||||
3 | 4 | 5 | 6 | 5 | 5 | 1 | ||||||||||||||
4 | +0.012 +0.004 | +0.020 +0.012 | 5 | 6 | 7 | 6 | 1 | |||||||||||||
5 | 6 | 7 | 8 | 10 | ||||||||||||||||
6 | 7 | 8 | 9 | 10 | 8 | |||||||||||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 9 | 10 | 11 | 12 | 15 | 1.5 | ||||||||||||
10 | 12 | 13 | 10 | 2 | ||||||||||||||||
■P, L, B Configurable
| Part Number | P 0.01mm Increment | L 1mm Increment | B 0.1mm Increment | C | ℓ | (W) | ||||
| Type | D Tolerance and Shape | D | D Tol. | |||||||
| m6 | p6 | |||||||||
| FPQ GFPQ SFPQ HFPQ CFPQ (Buff Finished) MFPQ MGFPQ MCFPQ [ ! ]Applicable when D≥5. | < Round > A (m6) PA (p6) < Diamond > D (m6) PD (p6) [ ! ]Applicable when D≥2 | 1 | +0.008 +0.002 | +0.012 +0.006 | 1.50~3.00(2.50) | 2, 3 | 1.5~5.0 | 0.1 | 0 | - |
2 | 2.50~6.00(4.00) | 2~6 | 1.5~15.0(10.0) | 0.5 | 1.2 | |||||
3 | 3.50~8.00 | 3~10 | 1.5~15.0(10.0) | 1 | 1.5 | |||||
4 | +0.012 +0.004 | +0.020 +0.012 | 4.50~8.00 | 3(4)~14 | 1.5~15.0(10.0) | 1 | 1.8 | |||
5 | 5.50~10.00 | 5~15 | 1.5~15.0(10.0) | 2.2 | ||||||
6 | 6.50~10.00 | 5~15 | 1.5~30.0(15.0) | 3.0 | ||||||
8 | +0.015 +0.006 | +0.024 +0.015 | 8.50~15.00 | 5(6)~16 | 1.5~30.0(15.0) | 1.5 | 3.5 | |||
10 | 11.00~17.00 | 5(10)~20 | 3.0~30.0(25.0) | 2 | 4.0 | |||||
12 | +0.018 +0.007 | +0.029 +0.018 | 13.00~18.00 | 6(10)~24 | 3.0~30.0(25.0) | 5.0 | ||||
13 | 14.00~20.00 | 7(12)~26 | 5.0~30.0(25.0) | 2 | 5.5 | |||||
16 | 17.00~27.00 | 8(15)~32 | 5.0~30.0 | 3 | 7.0 | |||||
20 | +0.021 +0.008 | +0.035 +0.022 | 22.00~30.00 | 10(15)~40 | 5.0~30.0 | 9.0 | ||||
Alterations
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| JPQPB10-12 |
| JPQPB10-13 |
| MCFPQA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MCFPQA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MCFPQA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MCFPQA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MCFPQA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MCFPQA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MCFPQA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MCFPQA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MCFPQD5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MCFPQD6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MCFPQD8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MCFPQD10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MCFPQD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MCFPQD13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MCFPQD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MCFPQD20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MCFPQPA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MCFPQPA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MCFPQPA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MCFPQPA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MCFPQPA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MCFPQPA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MCFPQPA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MCFPQPA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MCFPQPD5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MCFPQPD6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MCFPQPD8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MCFPQPD10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MCFPQPD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MCFPQPD13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MCFPQPD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MCFPQPD20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MFPQA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MFPQA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MFPQA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MFPQA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MFPQA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MFPQA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MFPQA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MFPQA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MFPQD5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MFPQD6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MFPQD8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MFPQD10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MFPQD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MFPQD13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MFPQD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MFPQD20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MFPQPA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MFPQPA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MFPQPA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MFPQPA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MFPQPA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MFPQPA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MFPQPA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MFPQPA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MFPQPD5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MFPQPD6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MFPQPD8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MFPQPD10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MFPQPD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MFPQPD13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MFPQPD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MFPQPD20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MGFPQA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MGFPQA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MGFPQA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MGFPQA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MGFPQA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MGFPQA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MGFPQA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MGFPQA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MGFPQD5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MGFPQD6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MGFPQD8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MGFPQD10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MGFPQD12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MGFPQD13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MGFPQD16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MGFPQD20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| MGFPQPA5-P[5.5-8/0.01]-L[5-10/1]-B[2-10/0.1] |
| MGFPQPA6-P[6.5-10/0.01]-L[6-12/1]-B[2-12/0.1] |
| MGFPQPA8-P[9-13/0.01]-L[8-16/1]-B[2-15/0.1] |
| MGFPQPA10-P[11-15/0.01]-L[10-20/1]-B[3-20/0.1] |
| MGFPQPA12-P[13-16/0.01]-L[12-24/1]-B[3-20/0.1] |
| MGFPQPA13-P[14-18/0.01]-L[13-26/1]-B[5-20/0.1] |
| MGFPQPA16-P[17-25/0.01]-L[16-32/1]-B[5-20/0.1] |
| MGFPQPA20-P[22-30/0.01]-L[20-40/1]-B[5-20/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Insertion Guide Tip Shape | Surface Treatment | Heat Treatment | Material | Locating Side Outer Dia. P (Ø) (mm) | Mounting Side Outer Dia. D (mm) | Mounting Side Tolerance | Mounting Section Length L (mm) | Positioning Part Length B (mm) | Dimension Configurable Type | Positioning Part Length B (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 26.45 | 1 Piece(s) | Available | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 12 | 10 | p6 | 15 | 10 | P Selectable | - | |
MYR 26.45 | 1 Piece(s) | Available | 3 Day(s) | 10 | Round | Not Provided | Dip Quenching | [Steel] SKS3 Equivalent | 13 | 10 | p6 | 15 | 10 | P Selectable | - | |
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5.5 ～ 8 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6.5 ～ 10 | 6 | m6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 9 ～ 13 | 8 | m6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 11 ～ 15 | 10 | m6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 16 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 14 ～ 18 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 17 ～ 25 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 22 ～ 30 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5.5 ～ 8 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6.5 ～ 10 | 6 | m6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 9 ～ 13 | 8 | m6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 11 ～ 15 | 10 | m6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 16 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 14 ～ 18 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 17 ～ 25 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 22 ～ 30 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5.5 ～ 8 | 5 | p6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6.5 ～ 10 | 6 | p6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 9 ～ 13 | 8 | p6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 11 ～ 15 | 10 | p6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 16 | 12 | p6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 14 ～ 18 | 13 | p6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 17 ～ 25 | 16 | p6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 22 ～ 30 | 20 | p6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 5.5 ～ 8 | 5 | p6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 6.5 ～ 10 | 6 | p6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 9 ～ 13 | 8 | p6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 11 ～ 15 | 10 | p6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 13 ～ 16 | 12 | p6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 14 ～ 18 | 13 | p6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 17 ～ 25 | 16 | p6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Stainless Steel] SUS440C or Equivalent | 22 ～ 30 | 20 | p6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | m6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | m6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | m6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 16 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 14 ～ 18 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | m6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | m6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | m6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 16 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 14 ～ 18 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | p6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | p6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | p6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | p6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 16 | 12 | p6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 14 ～ 18 | 13 | p6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | p6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | p6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | p6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | p6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | p6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | p6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 16 | 12 | p6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 14 ～ 18 | 13 | p6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | p6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | p6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | m6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | m6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | m6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 16 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 14 ～ 18 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | m6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | m6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | m6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | m6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 16 | 12 | m6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 14 ～ 18 | 13 | m6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | m6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Diamond | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | m6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 5.5 ～ 8 | 5 | p6 | 5 ～ 10 | - | P, L, B Configurable | 2 ～ 10 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 6.5 ～ 10 | 6 | p6 | 6 ～ 12 | - | P, L, B Configurable | 2 ～ 12 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 9 ～ 13 | 8 | p6 | 8 ～ 16 | - | P, L, B Configurable | 2 ～ 15 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 11 ～ 15 | 10 | p6 | 10 ～ 20 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 13 ～ 16 | 12 | p6 | 12 ～ 24 | - | P, L, B Configurable | 3 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 14 ～ 18 | 13 | p6 | 13 ～ 26 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 17 ～ 25 | 16 | p6 | 16 ～ 32 | - | P, L, B Configurable | 5 ～ 20 | ||
- | 1 Piece(s) | 5 Day(s) | 10 | Round | Hard Chrome Plating + Buffed | Dip Quenching | [Steel] SKS3 Equivalent | 22 ～ 30 | 20 | p6 | 20 ～ 40 | - | P, L, B Configurable | 5 ～ 20 |
Loading...
Example
Basic Information
| Basic Shape | Large Head | Environmentally friendly | RoHS Compliant (10 Substances) | Characteristics/Applications | Not Applicable |
|---|---|---|---|---|---|
| Insertion Guide Tip Type | Spherical | Insertion Guide Specifications | Not Provided | Mounting Side Shape | Straight (Press-Fit) |
| Locating Side O.D. Tolerance | 0/-0.01 |
Specification/Dimensions
-
Insertion Guide Tip Shape
-
Round -
Diamond
-
-
Surface Treatment
- Not Provided
- Hard Chrome Plating
- Buffed
- Hard Chrome Plating + Buffed
-
Heat Treatment
- Not Provided
- Dip Quenching
-
Material
- Steel
- Stainless Steel
- Steel
-
Locating Side Outer Dia. P (Ø)(mm)
-
Mounting Side Outer Dia. D(mm)
-
Mounting Side Tolerance
-
Mounting Section Length L(mm)
-
Positioning Part Length B(mm)
-
Dimension Configurable Type
- P Configurable
- P Selectable
- P, L, B Configurable
-
Positioning Part Length B(mm)
-
type
- CFPQA
- CFPQD
- CFPQPA
- CFPQPD
- CJPQB
- CJPQPB
- FPQA
- FPQD
- FPQPA
- FPQPD
- GFPQA
- GFPQD
- GFPQPA
- GFPQPD
- HFPQA
- HFPQD
- HFPQPA
- HFPQPD
- JPQB
- JPQPB
- MCFPQA
- MCFPQD
- MCFPQPA
- MCFPQPD
- MFPQA
- MFPQD
- MFPQPA
- MFPQPD
- MGFPQA
- MGFPQD
- MGFPQPA
- MGFPQPD
- MGJPQA
- MGJPQD
- MGJPQPA
- MGJPQPD
- SFPQA
- SFPQD
- SFPQPA
- SFPQPD
- SJPQB
- SJPQPB
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 3 Day(s) or Less
- 4 Day(s) or Less
- 5 Day(s) or Less
- 6 Day(s) or Less
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Locating Pins - Screw Mounted
- Locating Pins - Large Head, Tapered - Tapped
- Locating Pins - Shouldered (Set Screw-Circumference Groove)
- Locating Pins-High Hardness Stainless Steel/R/Taper R/Threaded
- Locating Pin High Hardness Stainless Steel Taper with Flange - Female Thread -
- [Clean & Pack] Small Diameter Locating Pin - Straight
- Flex Locator, Center Fixed (Taper Pin)
- One-Touch Flex Locator, Cam Handle Type (Pin)
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
Locating Pins - Shouldered - Tapered, Shoulder Thickness Configurable - Press FitMISUMI
Days to Ship : 3 Day(s) or more
-
-
-
-
-
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy