[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Sprockets-50B Series (Part Numbers)

Volume Discount

In addition to the shaft hole machined type, we also offer shaft hole rough machined products (S specification) that allow for free additional machining.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
Catalog

SP50B

[ ! ] Offset between tooth tip and keyway is ±0.5mm.

BSP50B

[ ! ] Offset between tooth tip and keyway is ±0.5mm.

SSP50B

[ ! ] Offset between tooth tip and keyway is ±0.5mm.

Type	[ M ] Material	[ S ] Surface Treatment
SP50B	S45C Equivalent (Spurs are Induction Hardened)	-
BSP50B	S45C Equivalent (Spurs are Induction Hardened)	Black Oxide
SSP50B	SUS304 Equivalent	-

[ A ] Accessory: Set Screw
(Only for shaft bore specifications)

Specifications

Part Number	−	Shaft Bore Specs.	−	Shaft Bore Dia.
SP50B16	−	N	−	10
BSP50B16	−	N	−	10
SSP50B17	−	S	−	11

■Compatible Chain Selection Method >> P.1578
Technical Data of Mechanical Transmission Chain >> P.2243

Part Number				Shaft Bore Specs.	Shaft Bore Specs.(D)																	Dp	Do	H	GD	L	ℓ	X	Z	Mass (g)
Type			Number of Teeth		S Specification	N Specification(H7)
Type	Nominal	Hub Type	Number of Teeth		S Specification	N Specification(H7)
SP	50	B	9	S N	10		16	17	18	19												46.42	53	34	29	25	5	8.7	6.4	200
			10		10	15	16	17	18	19	20	22										51.37	58	40	34					270
			11		12	15	16	17	18	19	20	22	24	25								56.35	64	45.5	38					330
			12		12	15	16	17	18	19	20	22	24	25	28	30	32					61.34	69	50	44					410
			13		12	15	16	17	18	19	20	22	24	25	28	30	32					66.34	74	51	49					460
			14		12	15	16	17	18	19	20	22	24	25	28	30	32					71.34	79	52	−		7		−	520
			15		12	15	16	17	18	19	20	22	24	25	28	30	32	35	38			76.35	84	57						620
			16		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40		81.37	89	62						720
			17		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40		86.39	94	67						830
			18		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40	45	91.42	100	72		28	8			1000
			19		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40	45	96.45	105	73						1100
			20		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40	45	101.48	110							1200
			21		14						20	22	24	25	28	30	32	35	38	40	45	106.51	115							1200
			22		16						20	22	24	25	28	30	32	35	38	40	45	111.55	120							1300
			23		16						20	22	24	25	28	30	32	35	38	40	45	116.58	125							1300
			24		16						20	22	24	25	28	30	32	35	38	40	45	121.62	130							1400
			25		16								24	25	28	30	32	35	38	40	45	126.66	135							1500
			26		16									25	28	30	32	35	38	40	45	131.7	140							1500
			28		16									25	28	30	32	35	38	40	45	141.79	150							1600
			30		16									25	28	30	32	35	38	40	45	151.87	161							1800
			32		16									25	28	30	32	35	38	40	45	161.96	171							1900
			34		16									25	28	30	32	35	38	40	45	172.05	181							2100
			35		16									25	28	30	32	35	38	40	45	177.1	186							2200

■Compatible Chain Selection Method >> P.1578
Technical Data of Mechanical Transmission Chain >> P.2243

Part Number				Shaft Bore Specs.	Shaft Bore Specs.(D)																	Dp	Do	H	GD	L	ℓ	X	Z	Mass (g)
Type			Number of Teeth		S Specification	N Specification(H7)
Type	Nominal	Hub Type	Number of Teeth		S Specification	N Specification(H7)
BSP	50	B	9	N	10		16	17	18	19												46.42	53	34	29	25	5	8.7	6.4	200
			10		10	15	16	17	18	19	20	22										51.37	58	40	34					270
			11		12	15	16	17	18	19	20	22	24	25								56.35	64	45.5	38					330
			12		12	15	16	17	18	19	20	22	24	25	28	30	32					61.34	69	50	44					410
			13		12	15	16	17	18	19	20	22	24	25	28	30	32					66.34	74	51	49					460
			14		12	15	16	17	18	19	20	22	24	25	28	30	32					71.34	79	52	−		7		−	520
			15		12	15	16	17	18	19	20	22	24	25	28	30	32	35	38			76.35	84	57						620
			16		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40		81.37	89	62						720
			17		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40		86.39	94	67						830
			18		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40	45	91.42	100	72		28	8			1000
			19		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40	45	96.45	105	73						1100
			20		14	15	16	17	18	19	20	22	24	25	28	30	32	35	38	40	45	101.48	110							1200
			21		14						20	22	24	25	28	30	32	35	38	40	45	106.51	115							1200
			22		16						20	22	24	25	28	30	32	35	38	40	45	111.55	120							1300
			23		16						20	22	24	25	28	30	32	35	38	40	45	116.58	125							1300
			24		16						20	22	24	25	28	30	32	35	38	40	45	121.62	130							1400
			25		16								24	25	28	30	32	35	38	40	45	126.66	135							1500
			26		16									25	28	30	32	35	38	40	45	131.7	140							1500
			28		16									25	28	30	32	35	38	40	45	141.79	150							1600
			30		16									25	28	30	32	35	38	40	45	151.87	161							1800
			32		16									25	28	30	32	35	38	40	45	161.96	171							1900
			34		16									25	28	30	32	35	38	40	45	172.05	181							2100
			35		16									25	28	30	32	35	38	40	45	177.1	186							2200

■Compatible Chain Selection Method >> P.1578
Technical Data of Mechanical Transmission Chain >> P.2243

Part Number				Shaft Bore Specs.	Shaft Bore Specs.(D)											Dp	Do	H	GD	L	ℓ	X	Z	Mass (g)
Type			Number of Teeth		S Specification	N Specification(H7)
Type	Nominal	Hub Type	Number of Teeth		S Specification	N Specification(H7)
SSP	50	B	10	S N	10	20	22									51.37	58	40	34	25	5	8.7	6.4	270
			11		12	20	22	24	25							56.35	64	45.5	39					330
			12		12	20	22	24	25							61.34	69	50	44					410
			13		12	20	22	24	25							66.34	74	51	49					460
			14		12	20	22	24	25	28	30					71.34	79	52	−		7		−	520
			15		12	20	22	24	25	28	30	32				76.35	84	57						620
			16		14	20	22	24	25	28	30	32		38		81.37	89	62						720
			17		14	20	22	24	25	28	30	32	35	38		86.39	94	67						830
			18		14	20	22	24	25	28	30	32	35	38	40	91.42	100	72		28	8			1000
			19		14	20	22	24	25	28	30	32	35	38	40	96.45	105	73						1100
			20		14	20	22	24	25	28	30	32	35	38	40	101.48	110							1200
			21		14	20			25		30		35		40	106.51	115							1200
			22		16	20			25		30		35		40	111.55	120							1300
			23		16	20			25		30		35			116.58	125							1300
			24		16	20			25		30		35			121.62	130							1400
			25		16	20			25		30		35		40	126.66	135							1500
			26		16	20			25		30		35			131.7	140							1500
			28		16	20			25		30		35		40	141.79	150							1600
			30		16	20			25		30		35		40	151.87	161							1800
			32		16				25		30		35			161.96	171							1900
			35		16				25		30		35			177.1	186							2200

■Shaft Bore Machining Dimension Table

Shaft Bore Dia. D	Keyway b² x t²	Set Screw M
10	3x1.4	4
10K, 12	4x1.8	5
14~17	5x2.3	6
18~22	6x2.8	6
24~30	8x3.3	8
32~38	10x3.3	8
40, 42	12x3.3	8
45, 50	14x3.8	10

[ ! ]Shaft Bore Sizes are different for the following products.

Combination	Set Screw M
Nominal35, Number of Teeth17, Shaft Dia.25	6
Nominal40, Number of Teeth14, Shaft Dia.25	6
Nominal40, Number of Teeth15, Shaft Dia.30	6
Nominal50, Number of Teeth11~13, Shaft Dia.24 or more	6

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
BSP50B9-N-[16,17,18,19]
BSP50B10-N-[15,16,17,18,19,20,22]
BSP50B11-N-[15,16,17,18,19,20,22,24,25]
BSP50B12-N-[15,16,17,18,19,20,22,24,25,28,30,32]
BSP50B13-N-[15,16,17,18,19,20,22,24,25,28,30,32]
BSP50B14-N-[15,16,17,18,19,20,22,24,25,28,30,32]
BSP50B15-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38]
BSP50B16-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40]
BSP50B17-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40]
BSP50B18-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40,45]
BSP50B19-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40,45]
BSP50B20-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40,45]
BSP50B21-N-[20,22,24,25,28,30,32,35,38,40,45]
BSP50B22-N-[20,22,24,25,28,30,32,35,38,40,45]
BSP50B23-N-[20,22,24,25,28,30,32,35,38,40,45]
BSP50B24-N-[20,22,24,25,28,30,32,35,38,40,45]
BSP50B25-N-[24,25,28,30,32,35,38,40,45]
BSP50B26-N-[25,28,30,32,35,38,40,45]
BSP50B28-N-[25,28,30,32,35,38,40,45]
BSP50B30-N-[25,28,30,32,35,38,40,45]
BSP50B32-N-[25,28,30,32,35,38,40,45]
BSP50B34-N-[25,28,30,32,35,38,40,45]
BSP50B35-N-[25,28,30,32,35,38,40,45]
SP50B9-N-[16,17,18,19]
SP50B9-S-10
SP50B10-N-[15,16,17,18,19,20,22]
SP50B10-S-10
SP50B11-N-[15,16,17,18,19,20,22,24,25]
SP50B11-S-12
SP50B12-N-[15,16,17,18,19,20,22,24,25,28,30,32]
SP50B12-S-12
SP50B13-N-[15,16,17,18,19,20,22,24,25,28,30,32]
SP50B13-S-12
SP50B14-N-[15,16,17,18,19,20,22,24,25,28,30,32]
SP50B14-S-12
SP50B15-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38]
SP50B15-S-12
SP50B16-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40]
SP50B16-S-14
SP50B17-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40]
SP50B17-S-14
SP50B18-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40,45]
SP50B18-S-14
SP50B19-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40,45]
SP50B19-S-14
SP50B20-N-[15,16,17,18,19,20,22,24,25,28,30,32,35,38,40,45]
SP50B20-S-14
SP50B21-N-[20,22,24,25,28,30,32,35,38,40,45]
SP50B21-S-14
SP50B22-N-[20,22,24,25,28,30,32,35,38,40,45]
SP50B22-S-16
SP50B23-N-[20,22,24,25,28,30,32,35,38,40,45]
SP50B23-S-16
SP50B24-N-[20,22,24,25,28,30,32,35,38,40,45]
SP50B24-S-16
SP50B25-N-[24,25,28,30,32,35,38,40,45]
SP50B25-S-16
SP50B26-N-[25,28,30,32,35,38,40,45]
SP50B26-S-16
SP50B28-N-[25,28,30,32,35,38,40,45]
SP50B28-S-16
SP50B30-N-[25,28,30,32,35,38,40,45]
SP50B30-S-16
SP50B32-N-[25,28,30,32,35,38,40,45]
SP50B32-S-16
SP50B34-N-[25,28,30,32,35,38,40,45]
SP50B34-S-16
SP50B35-N-[25,28,30,32,35,38,40,45]
SP50B35-S-16
SSP50B10-N-[20,22]
SSP50B10-S-10
SSP50B11-N-[20,22,24,25]
SSP50B11-S-12
SSP50B12-N-[20,22,24,25]
SSP50B12-S-12
SSP50B13-N-[20,22,24,25]
SSP50B13-S-12
SSP50B14-N-[20,22,24,25,28,30]
SSP50B14-S-12
SSP50B15-N-[20,22,24,25,28,30,32]
SSP50B15-S-12
SSP50B16-N-[20,22,24,25,28,30,32,38]
SSP50B16-S-14
SSP50B17-N-[20,22,24,25,28,30,32,35,38]
SSP50B17-S-14
SSP50B18-N-[20,22,24,25,28,30,32,35,38,40]
SSP50B18-S-14
SSP50B19-N-[20,22,24,25,28,30,32,35,38,40]
SSP50B19-S-14
SSP50B20-N-[20,22,24,25,28,30,32,35,38,40]

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Number of Teeth (T)	Shaft Bore Dia. D (or d) (mm)	Material	Type	Shaft Type	Surface Treatment	Bore Specification
-	1 Piece(s)		8 Day(s) or more	10	9	16 ～ 19	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	10	15 ～ 22	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	11	15 ～ 25	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	12	15 ～ 32	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	13	15 ～ 32	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	14	15 ～ 32	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	15	15 ～ 38	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	16	15 ～ 40	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	17	15 ～ 40	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	18	15 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	19	15 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	20	15 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	21	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	22	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		10 Day(s) or more	10	23	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	24	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	25	24 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	26	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	28	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	30	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	32	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	34	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		8 Day(s) or more	10	35	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Black Oxide	N (New JIS Key + Tap)
-	1 Piece(s)		6 Day(s) or more	10	9	16 ～ 19	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 26.40	1 Piece(s)	Available	4 Day(s) or more	-	9	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	10	15 ～ 22	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 28.29	1 Piece(s)	Available	4 Day(s) or more	-	10	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	11	15 ～ 25	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 33.36	1 Piece(s)	Available	4 Day(s) or more	-	11	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	12	15 ～ 32	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 36.38	1 Piece(s)	Available	4 Day(s) or more	-	12	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	13	15 ～ 32	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 40.32	1 Piece(s)	Available	4 Day(s) or more	-	13	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	14	15 ～ 32	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 42.60	1 Piece(s)	Available	4 Day(s) or more	-	14	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	15	15 ～ 38	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 51.25	1 Piece(s)	Available	4 Day(s) or more	-	15	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	16	15 ～ 40	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 57.81	1 Piece(s)	Available	4 Day(s) or more	-	16	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	17	15 ～ 40	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 64.70	1 Piece(s)	Available	4 Day(s) or more	-	17	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	18	15 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 76.67	1 Piece(s)	Available	4 Day(s) or more	-	18	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	19	15 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 83.21	1 Piece(s)	Available	4 Day(s) or more	-	19	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	20	15 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 86.98	1 Piece(s)	Available	4 Day(s) or more	-	20	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	21	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 89.83	1 Piece(s)	Available	4 Day(s) or more	-	21	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	22	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 96.32	1 Piece(s)	Available	4 Day(s) or more	-	22	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	23	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 99.16	1 Piece(s)	Available	4 Day(s) or more	-	23	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	24	20 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 108.50	1 Piece(s)	Available	4 Day(s) or more	-	24	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	25	24 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 115.05	1 Piece(s)	Available	4 Day(s) or more	-	25	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	26	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 123.38	1 Piece(s)	Available	4 Day(s) or more	-	26	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	28	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 132.78	1 Piece(s)	Available	4 Day(s) or more	-	28	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	30	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 143.07	1 Piece(s)	Available	4 Day(s) or more	-	30	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	32	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 152.41	1 Piece(s)	Available	4 Day(s) or more	-	32	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	34	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 173.89	1 Piece(s)	Available	4 Day(s) or more	-	34	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	35	25 ～ 45	[Steel] S45C (Induction Hardened Teeth Tip)	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 180.49	1 Piece(s)	Available	4 Day(s) or more	-	35	-	[Steel] S45C (Induction Hardened Teeth Tip)	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	10	20 ～ 22	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 76.51	1 Piece(s)	Available	4 Day(s) or more	-	10	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	11	20 ～ 25	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 81.94	1 Piece(s)	Available	4 Day(s) or more	-	11	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	12	20 ～ 25	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 91.23	1 Piece(s)	Available	4 Day(s) or more	-	12	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		10 Day(s) or more	10	13	20 ～ 25	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 99.60	1 Piece(s)	Available	4 Day(s) or more	-	13	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	14	20 ～ 30	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 106.00	1 Piece(s)	Available	4 Day(s) or more	-	14	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	15	20 ～ 32	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 118.28	1 Piece(s)	Available	4 Day(s) or more	-	15	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	16	20 ～ 38	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 305.54	1 Piece(s)	Available	4 Day(s) or more	-	16	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		10 Day(s) or more	10	17	20 ～ 38	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 97.91	1 Piece(s)	Available	4 Day(s) or more	10	17	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	18	20 ～ 40	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 366.56	1 Piece(s)	Available	4 Day(s) or more	10	18	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	19	20 ～ 40	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)
MYR 186.43	1 Piece(s)	Available	4 Day(s) or more	-	19	-	[Stainless Steel] SUS304 Equivalent	Pilot Bore Type	Standard Pilot Bore	Not Provided	S (Pilot Bore)
-	1 Piece(s)		6 Day(s) or more	10	20	20 ～ 40	[Stainless Steel] SUS304 Equivalent	Shaft Bore Machined Type	Shaft Bore Machining Configurable	Not Provided	N (New JIS Key + Tap)

Product TOP

Basic Information

Sprocket Shape	Shape B	Nominal	50	Number of Strands	Single Strand
Chain Type	RS

Configure

111 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Number of Teeth(T)
9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

28

30

32

34

35
Clear
Shaft Bore Dia. D (or d)(mm)
15

16

17

18

19

20

22

24

25

28

30

32

35

38

40

45
Clear
Material
- Steel
  - S45C (Induction Hardened Teeth Tip)
- Stainless Steel
  - SUS304 Equivalent
Clear
Type
- Pilot Bore Type
- Shaft Bore Machined Type
Clear
Shaft Type
- Standard Pilot Bore
- Shaft Bore Machining Configurable
Clear
Surface Treatment
- Not Provided
- Black Oxide
Clear
Bore Specification
- N (New JIS Key + Tap)
- S (Pilot Bore)
Clear
type
- BSP50B
- SP50B
- SSP50B
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

6 Day(s) or Less

8 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI Days to Ship : 5 Day(s) or more
Idler Sprockets - Single Bearing, Double Bearing
MISUMI Standard Price : MYR 50.91- Days to Ship : 1 Day(s) or more
Chains-Standard/Steel/Lubrication-Free/Stainless Steel
MISUMI Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Sprockets-40B Series
MISUMI

Days to Ship : 2 Day(s) or more
Sprockets-60B Series
MISUMI

Days to Ship : 4 Day(s) or more
Idler Sprockets - Single Bearing, Double Bearing
MISUMI

Standard Price : MYR 50.91-

Days to Ship : 1 Day(s) or more
Sprockets-35B Series
MISUMI

Days to Ship : 4 Day(s) or more
Chains-Standard/Steel/Lubrication-Free/Stainless Steel
MISUMI

Days to Ship : 1 Day(s) or more
Idler Sprocket With Boss
MISUMI

Standard Price : MYR 107.89-

Days to Ship : 1 Day(s) or more
Sprockets-80B Series
MISUMI

Days to Ship : 4 Day(s) or more
Sprockets-25B Series
MISUMI

Days to Ship : 4 Day(s) or more
Spur Gears- Induction Hardened, Pressure Angle 20°
MISUMI

Days to Ship : 9 Day(s) or more
Spur Gears, Pressure Angle 20° , Module 2.0
MISUMI

Days to Ship : 6 Day(s) or more
Sprockets-Double Pitch/S Type Dedicated Sprocket
MISUMI

Days to Ship : 6 Day(s) or more
Sprocket, 2-Row Type, SP50 Series
MISUMI

Days to Ship : 4 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Sprockets-50B Series (Part Numbers)

Specifications

Part Number

Basic Information

Configure

Specification/Dimensions

Number of Teeth(T)

Shaft Bore Dia. D (or d)(mm)

Material

Type

Shaft Type

Surface Treatment

Bore Specification

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm