[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Keyless High Torque Timing Pulleys - S3M

[Material]
· Pulley: Extra super duralumin aluminum alloy, S45C equivalent
· Flange: Aluminum alloy, SPCC
· Bushing: S45C equivalent
[Surface treatment]
· Clear anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black oxide

(i)Caution

Regarding RoHS compliance: The products are RoHS non-compliant only when alteration BMC is selected. The products are RoHS-compliant when BMC is not selected. As some parts used in the alteration are RoHS non-compliant, the RoHS notation on this page has been changed to non-compliant. "Non-compliant" is also indicated in the certificate due to information on the left.
Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.

Part Number

Configured Part Number is shown.

■S3M

● Pulley Shape

Shape E

Shape F

Standard Tooth Profile

Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 3.0 mm)

[ ! ] Surface treatment may not be applied to the shaft bores.
[ ! ] Two types of bushings are available: standard type (ST bushings) and short type (SH bushings).
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

Table 1: Select Shaft Bore Dia.

d_H7	Max. allowable torque N⋅m		D		(L)
d_H7	ST Bushing	SH Bushing	ST Bushing	SH Bushing	(L)
6	—	5.6	—	22.5	—
8	16	8.5	25.5	24.5	8.5
10	39	18	30	29	10.5
11	43	20	31	30
12	48	23	32	31
14	73	—	35	—	12
15	78		36		12
16	83		37		13
17	88		38		13
18	154		43		14
19	163		45
20	171		46
22	186		48
24	206	—	50	—	14
25	216	—	52	—	14

[ ! ] Electroless nickel plated bushing (alterations BMC, BMR) decreases maximum allowable torque and allowable thrust load by 20 to 30%.

■Belt Nominal Width / Dimensions

mm	Nominal
mm	S3M100	S3M150
A	11	17
W	15	21

Type	Part number		[M]Material ^*1			[S] Surface Treatment
	Belt Width: 10 mm	Belt width: 15 mm	Pulley	Flange	Bushing	Pulley	Flange	Bushing
	S3M100	S3M150
HTLA	●	●	Extra Super Duralumin Aluminum alloy	Aluminum alloy	S45C equivalent	Clear Anodize		—
HTLK	●	●				Hard clear anodize ^*2		—
HTLN	●	●				Electroless nickel plating		—
HTPL	●	●	S45C equivalent	SPCC	S45C equivalent	Black Oxide Coating
HTLG	●	●				Electroless nickel plating

*1The above materials and accessories might be changed to the ones equivalent to the originals.
*2 Hard clear anodize: film hardness 300 HV or more

Specification Table

Part number	—	Pulley Shape	—	Shaft Bore Dia.
HTPL 60S3M100	—	E	—	18

Part number			Pulley Shape	d_H7 range 1 mm increments				P.D	O.D	F	E
Type	Number of Teeth	Type Nominal Width		Shape E		Shape F
				S3M100	S3M150	S3M100	S3M150
				ST Bushing	ST Bushing	SH Bushing	SH Bushing
HTLA HTLK HTLN HTPL HTLG	34	S3M100 S3M150	E F	8		6		32.47	31.71	40	28
	35							33.42	32.66
	36							34.38	33.62
	37							35.33	34.57
	38							36.29	35.53	44	32
	39							37.24	36.48
	40			8,10,11		8		38.20	37.44
	41							39.15	38.39
	42							40.11	39.35	48	36
	43							41.06	40.30
	44			8,10-12,14		8	8,10-12	42.02	41.25
	45							42.97	42.21
	46							43.93	43.16
	47							44.88	44.12	50	38
	48			8,10-12,14-16				45.84	45.07	50	38
	49			8,10-12,14-16				46.79	46.03	52	40
	50			8,10-12,14-17				47.75	46.98
	51							48.70	47.94
	52							49.66	48.89	55
	53							50.61	49.85
	54							51.57	50.80
	55							52.52	51.76	61	46
	56							53.48	52.71
	57							54.43	53.67
	58							55.39	54.62
	59							56.34	55.58
	60			8,10-12,14-19				57.30	56.53
	72			8,10-12,14-20,22,24,25				68.75	67.99	74	58

Alterations

Part number	—	Pulley Shape	—	Shaft Bore Dia.	—	(FC·NFC·LFC·RFC·BMC·BMR)
HTLA 60S3M100	—	E	—	18	—	FC59

Alterations	Flange Cut		No Flange	Single Flange	Surface Treatment
Code	FC		NFC	LFC·RFC	BMC·BMR
Spec.	Lowers the flange by cutting. FC: 0.5 mm Increments [ ! ] No surface treatment is applied on flange circumference.		The product is shipped without swaging the flange. (Flange Included)	The product is shipped by swaging the flanges either on the bushing side (LFC) or the opposite side (RFC). (Flange 1 pc. Included)	Applies electroless nickel plating on a bushing. (Antirusting treatment is applied to screws.) [ ! ] Electroless nickel plating decreases bushing's allowable torque by 20 to 30%. BMC: Not RoHS Compliant (Screw: SCM435 Dacrotized Treatment) BMR: RoHS Compliant (Screw: SCM435 GeoMet Coating)
Spec.		[ ! ]FC ≥ (O. D.) +1 [ ! ]FC ≤ F－2 Ordering Code FC35

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 45; 60

Part Number
HTLA34S3M100-E-8
HTLA34S3M100-F-6
HTLA34S3M150-E-8
HTLA34S3M150-F-6
HTLA36S3M100-E-8
HTLA36S3M100-F-6
HTLA36S3M150-E-8
HTLA36S3M150-F-6
HTLA40S3M100-E-[8,10,11]
HTLA40S3M100-F-8
HTLA40S3M150-E-[8,10,11]
HTLA40S3M150-F-8
HTLA44S3M100-E-[8,10,11,12,14]
HTLA44S3M100-F-8
HTLA44S3M150-E-[8,10,11,12,14]
HTLA44S3M150-F-[8,10,11,12]
HTLA48S3M100-E-[8,10,11,12,14,15,16]
HTLA48S3M100-F-8
HTLA48S3M150-E-[8,10,11,12,14,15,16]
HTLA48S3M150-F-[8,10,11,12]
HTLA50S3M100-E-[8,10,11,12,14,15,16,17]
HTLA50S3M100-F-8
HTLA50S3M150-E-[8,10,11,12,14,15,16,17]
HTLA50S3M150-F-[8,10,11,12]
HTLA60S3M100-E-[8,10,11,12,14,15,16,17,18,19]
HTLA60S3M100-F-8
HTLA60S3M150-E-[8,10,11,12,14,15,16,17,18,19]
HTLA60S3M150-F-[8,10,11,12]
HTLA72S3M100-E-[8,10,11,12,14,15,16,17,18,19,20,22,24,25]
HTLA72S3M100-F-8
HTLA72S3M150-E-[8,10,11,12,14,15,16,17,18,19,20,22,24,25]
HTLA72S3M150-F-[8,10,11,12]
HTLG34S3M100-E-8
HTLG34S3M100-F-6
HTLG34S3M150-E-8
HTLG34S3M150-F-6
HTLG36S3M100-E-8
HTLG36S3M100-F-6
HTLG36S3M150-E-8
HTLG36S3M150-F-6
HTLG40S3M100-E-[8,10,11]
HTLG40S3M100-F-8
HTLG40S3M150-E-[8,10,11]
HTLG40S3M150-F-8
HTLG44S3M100-E-[8,10,11,12,14]
HTLG44S3M100-F-8
HTLG44S3M150-E-[8,10,11,12,14]
HTLG44S3M150-F-[8,10,11,12]
HTLG48S3M100-E-[8,10,11,12,14,15,16]
HTLG48S3M100-F-8
HTLG48S3M150-E-[8,10,11,12,14,15,16]
HTLG48S3M150-F-[8,10,11,12]
HTLG50S3M100-E-[8,10,11,12,14,15,16,17]
HTLG50S3M100-F-8
HTLG50S3M150-E-[8,10,11,12,14,15,16,17]
HTLG50S3M150-F-[8,10,11,12]
HTLG60S3M100-E-[8,10,11,12,14,15,16,17,18,19]
HTLG60S3M100-F-8
HTLG60S3M150-E-[8,10,11,12,14,15,16,17,18,19]
HTLG60S3M150-F-[8,10,11,12]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Material	Surface Treatment	Shaft Bore Dia. [d] (mm)
-	1 Piece(s)	7 Day(s)	10	10	34	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	10	34	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	6
-	1 Piece(s)	7 Day(s)	10	15	34	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	34	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	6
-	1 Piece(s)	7 Day(s)	10	10	36	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	10	36	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	6
-	1 Piece(s)	7 Day(s)	10	15	36	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	36	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	6
-	1 Piece(s)	7 Day(s)	10	10	40	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 11
-	1 Piece(s)	7 Day(s)	10	10	40	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	40	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 11
-	1 Piece(s)	7 Day(s)	10	15	40	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	10	44	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 14
-	1 Piece(s)	7 Day(s)	10	10	44	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	44	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 14
-	1 Piece(s)	7 Day(s)	10	15	44	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	48	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 16
-	1 Piece(s)	7 Day(s)	10	10	48	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	48	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 16
-	1 Piece(s)	7 Day(s)	10	15	48	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	50	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 17
-	1 Piece(s)	7 Day(s)	10	10	50	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	50	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 17
-	1 Piece(s)	7 Day(s)	10	15	50	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	60	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 19
-	1 Piece(s)	7 Day(s)	10	10	60	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	60	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 19
-	1 Piece(s)	7 Day(s)	10	15	60	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	72	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 25
-	1 Piece(s)	7 Day(s)	10	10	72	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8
-	1 Piece(s)	7 Day(s)	10	15	72	Shape E	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 25
-	1 Piece(s)	7 Day(s)	10	15	72	Shape F	[Aluminum] Extra Super Duralumin Series Aluminum Alloy	Clear Anodize	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	34	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	10	34	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	6
-	1 Piece(s)	7 Day(s)	10	15	34	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	15	34	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	6
-	1 Piece(s)	7 Day(s)	10	10	36	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	10	36	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	6
-	1 Piece(s)	7 Day(s)	10	15	36	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	15	36	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	6
-	1 Piece(s)	7 Day(s)	10	10	40	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 11
-	1 Piece(s)	7 Day(s)	10	10	40	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	15	40	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 11
-	1 Piece(s)	7 Day(s)	10	15	40	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	10	44	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 14
-	1 Piece(s)	7 Day(s)	10	10	44	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	15	44	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 14
-	1 Piece(s)	7 Day(s)	10	15	44	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	48	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 16
-	1 Piece(s)	7 Day(s)	10	10	48	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	15	48	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 16
-	1 Piece(s)	7 Day(s)	10	15	48	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	50	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 17
-	1 Piece(s)	7 Day(s)	10	10	50	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	15	50	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 17
-	1 Piece(s)	7 Day(s)	10	15	50	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 12
-	1 Piece(s)	7 Day(s)	10	10	60	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 19
-	1 Piece(s)	7 Day(s)	10	10	60	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8
-	1 Piece(s)	7 Day(s)	10	15	60	Shape E	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 19
-	1 Piece(s)	7 Day(s)	10	15	60	Shape F	[Steel] S45C Equivalent	Electroless Nickel Plating	8 ～ 12

Product TOP

Basic Information

Type	Keyless Bushings	Belt Type	S3M	Timing Pulley / Idler	Pulleys

Configure

158 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Belt Width Used(mm)
10

15
Clear
No. of Teeth(T)
34

36

40

44

48

50

60

72
Clear
Pulley Shape
- Shape E
- Shape F
Clear
Material
- Steel
  - S45C Equivalent
- Aluminum
  - Extra Super Duralumin Series Aluminum Alloy
Clear
Surface Treatment
- Black Oxide Coating
- Clear Anodize
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
Shaft Bore Dia. [d](mm)
6

8

10

11

12

14

15

16

17

18

19

20

22

24

25
Clear
type
- HTLA□□S3M
- HTLG□□S3M
- HTLK□□S3M
- HTLN□□S3M
- HTPL□□S3M
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI Days to Ship : 5 Day(s) or more
Timing Pulleys - MXL Type
MISUMI Days to Ship : 6 Day(s) or more

Customers Who Viewed This Item Also Viewed

High Torque Timing Pulleys S3M Type
MISUMI

Days to Ship : 6 Day(s) or more
Keyless High Torque Timing Pulleys - S5M
MISUMI

Days to Ship : 7 Day(s) or more
Clamping High Torque Timing Pulleys - S3M, S5M, S8M
MISUMI

Days to Ship : 7 Day(s)
Keyless High Torque Timing Pulleys - S8M
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - XL Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - L Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S2M Type
MISUMI

Days to Ship : 6 Day(s) or more
Keyless High Torque Timing Pulleys - S8M - MechaLock Standard Type Incorporated (with Centering Function)
MISUMI

Standard Price : MYR 266.26-

Days to Ship : 6 Day(s) or more
Keyless Timing Pulleys - T5
MISUMI

Days to Ship : 7 Day(s) or more
Keyless Timing Pulleys - L
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - MXL Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - H Type
MISUMI

Days to Ship : 6 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Keyless High Torque Timing Pulleys - S3M

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Belt Width Used(mm)

No. of Teeth(T)

Pulley Shape

Material

Surface Treatment

Shaft Bore Dia. [d](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm