[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Timing Pulleys T10 Type (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

[Material]
· Pulley: Aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, SPCC
[Surface treatment]
· Clear anodize, black anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black oxide

(i)Caution

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

■T10

● Pulley Shape

Shape A

Shape B

Standard Tooth Profile

Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 10.0 mm)

[ ! ]2

[ ! ]1

■Belt Nominal Width / Dimensions

mm	Nominal
mm	T10150	T10200	T10250	T10300	T10300	T10500
A	17	22	27	32	43	53
W	22	27	32	37	48	58
L Number of Teeth 12 to 40	37	42	47	52	61	70
L Number of Teeth 44 to 60	37	42	52	57	63	70

■Tapped Hole Dimensions (Shaft Bore Specs.: P, N, C)

d_H7 Shaft Bore I.D.	M (Coarse)	Accessory Set Screws	Number of Accessories Included
8 to 12	M4	M4 × 3	2
13 to 17	M5	M5 × 4
18 to 30	M6	M6 × 5
31 to 45	M8	M8 × 6
46 to 70	M10	M10 × 8

Dimensional tolerances without command

Dimension Range		Tolerance (㎜)
Over	or Less	Tolerance (㎜)
0.5	3	±0.1
3	6	±0.1
6	30	±0.2
30	120	±0.3

[ ! ] Compliant with JIS B 0405 Class m
(Medium Class).

[ ! ] For aluminum flanges, the flange thickness is 1.5.
[ ! ] 1 The number of teeth 33, 34, 49 to 60 toothed pulleys is t=2.0 (Machined Flange)
[ ! ] 2 Shaft Bore Specs. H (Round Hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes.
[ ! ] The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

Shaft Bore Specification Select shaft bore spec mark and each dim. from the table below. [ ! ] Surface treatment may not be applied to the shaft bores.

H round hole

P Round Hole + Tap

N New JIS Keyway + Tap
C Old JIS Keyway + Tap

[ ! ] For A-Shape pulley, the screw holes are
set at around 120° to keep away from peaks.

V stepped hole

F Stepped Hole (Counterbored
Hole on the Hub Side)

Y Both Ends Stepped Hole

WB Two-stepped hole

[ ! ] Z-V(d) ≥ 2
[ ! ] Shape A: 2.0 ≤ J ≤
　　W-2.0
　　Shape B: 2.0 ≤ J ≤
　　L-2.0

[ ! ] Applicable to Shape B
　　only
[ ! ] Z-F(d) ≥ 2
[ ! ] 2.0 ≤ J ≤ L-2.0

[ ! ] Applicable to Shape A
　　only
[ ! ] Q-Y(d) ≥ 2
[ ! ] R-Y(d) ≥ 2
[ ! ] S+T ≤ W-3.0
[ ! ] S (T) ≥ 3.0

[ ! ] Applicable to Shape A
　　only
[ ! ] Q-R ≥ 2
[ ! ] R-WB(d) ≥ 2
[ ! ] S+T ≤ W-3.0
[ ! ] S (T) ≥ 3.0

■Keyway Dimension Table

d Dimensional Tolerance (H7)

Nominal(N,C)	d_H7
8 to 10(K)	＋0.015 0
11 to 18	＋0.018 0
19 to 30	＋0.021 0
31 to 50	＋0.025 0
51 to 70	＋0.030 0

New JIS Keyway Dimension Tolerance

Nominal(N)	b_JS9		t
8 to 10	3	±0.0125	1.4	＋0.1 0
10K to 12	4	±0.0150	1.8
13 to 17	5		2.3
18 to 22	6		2.8
23 to 30	8	±0.0180	3.3	＋0.2 0
31 to 38	10	±0.0180
39 to 44	12	±0.0215
45 to 50	14		3.8
55	16		4.3

Old JIS Keyway Dimension Tolerance

Nominal(C)	b_JS9		t
10 to 12	4	＋0.022 ＋0.010	1.5	＋0.1 0
15 to 20	5		2

■Pulley Shape and Shaft Bore Machining Table

Shape	Hole
Shape	H	P	N(C)	V	F	Y	WB
A	○	○	○	○	‐	○	○
B	○	○	○	○	○	‐	‐

Type	Belt Width						[M] Material		[S] Surface Treatment	[A] Accessory Set Screws
	15 mm	20 mm	25 mm	30 mm	40 mm	50 mm	Pulley	Flange
	T10150	T10200	T10250	T10300	T10400	T10500	Pulley	Flange
TTPA	●	●	●	●	●	●	Aluminum alloy	Aluminum alloy	Clear Anodize	SUS304
TTPB	●	●	●	●	●	●			Black Anodize
TTPK	●	●	●	●	●	●			Hard Clear Anodize
TTPN	●	●	●	●	●	●			Electroless nickel plating
TTPT	●	●	●	●	●	●	S45C Equivalent	SPCC	-	SCM435 (Black Oxide)
TTPM	●	●	●	●	●	●			Black Oxide Coating
TTPP	●	●	●	●	●	●			Electroless nickel plating
TTPS	●	●	●	●			SUS304	SUS304	-	SUS304

[ ! ] Flange is already swaged, and set screws are included for Shaft Bores P, N and C.
[ ! ] For orders with no flange, please specify the alteration NFC.

Specification Table

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(Shaft Bore Specs.: H, P, N, C)

TTPA14T10500

NK10

(Shaft Bore Specs.: V, F)

TTPA48T10500

V20

Z38

J23.5

(Shaft Bore Specs.: Y, WB)

TTPA24T10250

Y25

Q37

R37

Part number			Pulley Shape	Pulley Shape						P.D.	O.D	D	F	E
Type	Number of Teeth	Type Nominal Width		A			B
				Shaft Bore Specs.: 1 mm Increments / Selectable
				H (d) Round Hole V (d), Y (d), WB (d) Z·Q·R Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped	H (d) Round Hole V (d), F (d), Z Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped
Aluminum TTPA TTPB TTPK TTPN Steel TTPT TTPM TTPP Stainless Steel TTPS	12	T10150 T10200 T10250 T10300 T10400 T10500	A	8 to 23	8 to 18	8 to 18	-	-	-	38.20	36.35	-	40	27
	13			8 to 26	8 to 21	8 to 21				41.38	39.53		45	30
	14		A B	10 to 31	10 to 26	10 to 26	10 to 28	10 to 22	10 to 20	44.56	42.70	32	48	35
	15			10 to 32			10 to 29	10 to 23		47.75	45.90	33	52	36
	16			12 to 36	12 to 30	12 to 30	12 to 33	12 to 27	12 to 22	50.93	49.05	37	58	40
	17			12 to 41			12 to 36	12 to 30	12 to 25	54.11	52.26	40	61	45
	18									57.30	55.45
	19			12 to 46	12 to 40	12 to 40	12 to 43	12 to 35	12 to 29	60.48	58.63	47	67	50
	20									63.66	61.80
	21			12 to 54	12 to 46	12 to 46	12 to 46	12 to 38	12 to 32	66.84	64.99	50	74	58
	22			12 to 56	12 to 48	12 to 48				70.03	68.15		80	60
	23			12 to 59			12 to 56	12 to 46	12 to 40	73.21	71.36	60	83	63
	24			12 to 63	12 to 50	12 to 50				76.39	74.55		87	67
	25						12 to 59	12 to 49	12 to 43	79.58	77.70	63
	26									82.76	80.90
	27			12 to 68	12 to 57		12 to 66	12 to 56	12 to 48	85.94	84.09	70	95	75
	28									89.13	87.25
	29			12 to 72	12 to 61		12 to 71	12 to 61	12 to 50	92.31	90.46	75	99	80
	30			12 to 76	12 to 65	12 to 55				95.49	93.65		104	84
	31									98.68	96.83
	32			20 to 80	20 to 70		20 to 80	20 to 65	20 to 55	101.86	100.00	85	111	90
	33						20 to 84	20 to 70		105.04	103.19	90	115	95
	34									108.23	106.40
	35									111.41	109.56		119	100
	36			20 to 85			20 to 85			114.59	112.75	95	123	102
	37									117.77	115.92		127	105
	38									120.96	119.11
	39									124.14	122.29		131	110
	40									127.32	125.45	100	135	115
	41									130.51	128.66		140	120
	42									133.69	131.84
	43									136.87	135.02		144	125
	44									140.06	138.20		152	130
	45									143.24	141.39
	46									146.42	144.57
	47									149.61	147.76		160	140
	48									152.79	150.95
	49									155.97	154.12		165
	50									159.15	157.30		170	150
	51									162.34	160.49
	52									165.52	163.67		180	155
	53									168.70	166.85
	54									171.89	170.04
	55									175.07	173.22		185	160
	56									178.25	176.40
	57									181.44	179.59		190	170
	58									184.62	182.77		200	175
	59									187.80	185.95
	60									190.99	189.10
[ NG ] Shaft Bore Dia. 9 or 51 to 54 are not available for Shaft Bore Spec. N. [ ! ] Shaft Bore Dia. 6.35 is selectable for Shaft Bore Specs. H, P, V, and F. [ ! ] NK10 is selectable for Shaft Bore Spec. N. [ NG ] Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 50 are not available for Shaft Bore Spec. C.

Alterations

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(KC90, etc.)

TTPA36T10250

H40

KSC80 - K10

Alterations	Set Screw Angle Change	No Flange	Single Flange	Flange Cut
Code	KC90	NFC	RFC·LFC	FC
Spec.	Changes an angle of set screw to 90°. [ ! ] For A-Shape pulley, the screw holes are set at around 90° to keep away from peaks.	(Flange 2 pcs. Included) Ordering Code NFC	(Flange 1 pc. Included) Ordering Code RFC	Cut the flange O.D. in 0.5 mm increments. Ordering Code FC17 Application Notes [ ! ] FC ≥ (O. D.) +1 [ ! ] FC ≤ F-2 [ ! ] No surface treatment is applied on flange circumference.

Alterations

Retaining Ring Groove

Taper for Bearing Holder

Hub Shortening

Tapped Hole Dimensions

Included Set Screw Length Change

Code

SRG

BTC

TPC

SLH

Spec.

Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined.

Specify SRG 2.5 to 49.5 mm
　　　　　0.5 mm Increments
Applicable Conditions [ ! ]
Minimum Thickness: 2 mm
[ ! ] Applicable to Shaft Bore Specs. V and F only
[ ! ] Standards of retaining ring groove for Z dim. is applied

[ ! ] n ≤ J-SRG-m
Ordering Code SRG7

Taper for retaining bearing inner ring

Ordering Code BTC12-TL3
Application Notes
[ ! ] Applicable to Shape A only
[ ! ] Applicable to Shaft Bore Specs. H and P only
[ ! ] TL < L-W
[ ! ] When E-D ≤ 6, one side installed and 1 pc. of flange included

Cuts the hub length in 0.5 mm increments

Ordering Code BC6.5
Application Notes
[ ! ] Shaft Bore Specs. H, V, F:
　3 ≤ BC < L-W
[ ! ] Shaft Bore Specs. P, N, C:
　M+3 ≤ BC < L-W
[NG] Not applicable to Shape A

Ordering Code TPC5
Application Notes
[ ! ] Applicable to Shaft Bore Specs. P, N, C only

M	TPC
M4	M5
M5	M4·M6
M6	M5·M8
M8	M6·M10
M10	M8

Ordering Code SLH10
Application Notes
[ ! ] Applicable to Shaft Bore Specs. P, N, C only

Set Screws	SLH
M4 × 3	5·8
M5 × 4	6·10
M6 × 5	10
M8 × 6	10·12
M10 × 8	12·15

Alterations	Add Side Holes
Alterations	Side Tapped Hole	Side Through Hole	Side Counterbored
Code	QTC·QFC·QSC	KTC·KFC·KSC	ZTC·ZFC·ZSC
Spec.	Machines tapped hole on the side surface of hub side. Ordering Code QTC28-M4 Q□C Selection Specify the hole position (P. C. D. dim.).　 M Selection M3, M4, M5, M6, M8 Application Notes [ ! ] Minimum Thickness: 2 mm [ ! ] Conditions may vary depending on the shaft bore specs.	Machines through hole on the side surface. Ordering Code KTC28-K4.5 K□C Selection Specify the hole position (P. C. D. dim.).　 Specify K K4.0 to 13.0 (0.5 mm Increments) Application Notes [ ! ] Minimum Thickness: 2 mm [ ! ] Conditions may vary depending on the shaft bore specs.	Machines counterbored hole on the side surface. Ordering Code ZTC28-ZM4 Z□C Selection Specify the hole position (P. C. D. dim.).　 ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8 Application Notes [ ! ] Minimum Thickness: 2 mm [ ! ] Conditions may vary depending on the shaft bore specs.
Spec.	(6 Locations) (4 Locations) (3 Locations)	(6 Locations) (4 Locations) (3 Locations)	(6 Locations) (4 Locations) (3 Locations)

[ ! ] Conditions for side hole alteration vary depending on the shaft bore specification.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

1
2
3
4
5
Next >>

Part Number
TTPA12T10150-A-C[10,12,15,16,18]
TTPA12T10150-A-H[8-19/1]
TTPA12T10150-A-N8
TTPA12T10150-A-N[10-18/1]
TTPA12T10150-A-NK10
TTPA12T10150-A-P[8-18/1]
TTPA12T10150-A-V[8-17/1]
TTPA12T10150-A-Y[8-17/1]
TTPA12T10200-A-C[10,12,15,16,18]
TTPA12T10200-A-H[8-19/1]
TTPA12T10200-A-N8
TTPA12T10200-A-N[10-18/1]
TTPA12T10200-A-NK10
TTPA12T10200-A-P[8-18/1]
TTPA12T10200-A-V[8-17/1]
TTPA12T10200-A-Y[8-17/1]
TTPA12T10250-A-C[10,12,15,16,18]
TTPA12T10250-A-H[8-19/1]
TTPA12T10250-A-N8
TTPA12T10250-A-N[10-18/1]
TTPA12T10250-A-NK10
TTPA12T10250-A-P[8-18/1]
TTPA12T10250-A-V[8-17/1]
TTPA12T10250-A-Y[8-17/1]
TTPA12T10300-A-C[10,12,15,16,18]
TTPA12T10300-A-H[8-19/1]
TTPA12T10300-A-N8
TTPA12T10300-A-N[10-18/1]
TTPA12T10300-A-NK10
TTPA12T10300-A-P[8-18/1]
TTPA12T10300-A-V[8-17/1]
TTPA12T10300-A-Y[8-17/1]
TTPA12T10400-A-C[10,12,15,16,18]
TTPA12T10400-A-H[8-19/1]
TTPA12T10400-A-N8
TTPA12T10400-A-N[10-18/1]
TTPA12T10400-A-NK10
TTPA12T10400-A-P[8-18/1]
TTPA12T10400-A-V[8-17/1]
TTPA12T10400-A-Y[8-17/1]
TTPA12T10500-A-C[10,12,15,16,18]
TTPA12T10500-A-H[8-23/1]
TTPA12T10500-A-N8
TTPA12T10500-A-N[10-18/1]
TTPA12T10500-A-NK10
TTPA12T10500-A-P[8-18/1]
TTPA12T10500-A-V[8-21/1]
TTPA12T10500-A-WB[8-21/1]
TTPA12T10500-A-Y[8-21/1]
TTPA14T10150-A-C[10,12,15,16,18,19,20]
TTPA14T10150-A-H[10-27/1]
TTPA14T10150-A-N[10-26/1]
TTPA14T10150-A-NK10
TTPA14T10150-A-P[10-26/1]
TTPA14T10150-A-V[10-25/1]
TTPA14T10150-A-Y[10-25/1]
TTPA14T10150-B-C[10,12,15,16,18,19,20]
TTPA14T10150-B-F[10-25/1]
TTPA14T10150-B-H[10-27/1]
TTPA14T10150-B-N[10-20/1]
TTPA14T10150-B-NK10
TTPA14T10150-B-P[10-22/1]
TTPA14T10150-B-V[10-25/1]
TTPA14T10200-A-C[10,12,15,16,18,19,20]
TTPA14T10200-A-H[10-27/1]
TTPA14T10200-A-N[10-26/1]
TTPA14T10200-A-NK10
TTPA14T10200-A-P[10-26/1]
TTPA14T10200-A-V[10-25/1]
TTPA14T10200-A-Y[10-25/1]
TTPA14T10200-B-C[10,12,15,16,18,19,20]
TTPA14T10200-B-F[10-25/1]
TTPA14T10200-B-H[10-27/1]
TTPA14T10200-B-N[10-20/1]
TTPA14T10200-B-NK10
TTPA14T10200-B-P[10-22/1]
TTPA14T10200-B-V[10-25/1]
TTPA14T10250-A-C[10,12,15,16,18,19,20]
TTPA14T10250-A-H[10-27/1]
TTPA14T10250-A-N[10-26/1]
TTPA14T10250-A-NK10
TTPA14T10250-A-P[10-26/1]
TTPA14T10250-A-V[10-25/1]
TTPA14T10250-A-Y[10-25/1]
TTPA14T10250-B-C[10,12,15,16,18,19,20]
TTPA14T10250-B-F[10-25/1]
TTPA14T10250-B-H[10-27/1]
TTPA14T10250-B-N[10-20/1]
TTPA14T10250-B-NK10
TTPA14T10250-B-P[10-22/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Material	Surface Treatment	Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm)	Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N] (mm)	Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C] (mm)	Shaft Bore Specifications (Round Hole + Tap) [P] (mm)	Shaft Bore Specifications (Round Hole) [H] (mm)	Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]	Shaft Bore Specifications (Stepped Hole) [V] (mm)	Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm)	Shaft Bore Specifications (Two-stepped Hole) [WB] (mm)
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	8 ～ 19	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	8 ～ 17	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	8 ～ 17	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	8 ～ 19	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	8 ～ 17	-	-
-	1 Piece(s)	7 Day(s)	10	20	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	8 ～ 17	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	8 ～ 19	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	8 ～ 17	-	-
-	1 Piece(s)	7 Day(s)	10	25	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	8 ～ 17	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	8 ～ 19	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	8 ～ 17	-	-
-	1 Piece(s)	7 Day(s)	10	30	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	8 ～ 17	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 18	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	8 ～ 19	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	8 ～ 17	-	-
-	1 Piece(s)	7 Day(s)	10	40	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	8 ～ 17	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 12	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	8 ～ 23	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	8	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 18	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	8 ～ 18	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	8 ～ 21	-	-
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	-	8 ～ 21
-	1 Piece(s)	7 Day(s)	10	50	12	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	8 ～ 21	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	10 ～ 27	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 26	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	10 ～ 26	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	10 ～ 25	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	10 ～ 25	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	10 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	10 ～ 27	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 20	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	10 ～ 22	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	10 ～ 25	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	10 ～ 27	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 26	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	10 ～ 26	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	10 ～ 25	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	10 ～ 25	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	10 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	10 ～ 27	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 20	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	10 ～ 22	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	20	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	10 ～ 25	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	10 ～ 27	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 26	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	10 ～ 26	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	10 ～ 25	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	10 ～ 25	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	10 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	10 ～ 25	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	10 ～ 27	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	10 ～ 20	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	10	-	-	-
-	1 Piece(s)	7 Day(s)	10	25	14	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	10 ～ 22	-	-	-	-	-

1
2
3
4
5
Next >>

Product TOP

Basic Information

Type	Timing Pulleys	Belt Type	T10	Timing Pulley / Idler	Pulleys
Features, Areas of Application	Not Applicable	Environmental Compliance	RoHS compliant (10 substances)

Configure

11,139 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Belt Width Used(mm)
15

20

25

30

40

50
Clear
No. of Teeth(T)
12

14

15

16

18

20

22

24

25

26

28

30

32

34

36

40

44

48

50

60
Clear
Pulley Shape
- Shape A
- Shape B
Clear
Material
- Steel
  - S45C Equivalent
- Aluminum
  - Aluminum Alloy
Clear
Surface Treatment
- Not Provided
- Black Oxide Coating
- Clear Anodize
- Black Anodize
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
[8-83/1mm Unit(s)]
Clear
Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)
8

55
[10-55/1mm Unit(s)]
Clear
Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)
10

12

15

16

18

19

20
Clear
Shaft Bore Specifications (Round Hole + Tap) [P](mm)
12.7
[8-70/1mm Unit(s)]
Clear
Shaft Bore Specifications (Round Hole) [H](mm)
12.7
[8-85/1mm Unit(s)]
Clear
Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
10
Clear
Shaft Bore Specifications (Stepped Hole) [V](mm)
[8-83/1mm Unit(s)]
Clear
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
[10-83/1mm Unit(s)]
Clear
Shaft Bore Specifications (Two-stepped Hole) [WB](mm)
[8-83/1mm Unit(s)]
Clear
type
- TTPA□□T10
- TTPB□□T10
- TTPK□□T10
- TTPM□□T10
- TTPN□□T10
- TTPP□□T10
- TTPT□□T10
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

4 Day(s) or Less

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less

10 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI Days to Ship : 5 Day(s) or more
Timing Belts with Attachments-T5/T10
MISUMI Days to Ship : 11 Day(s) or more

Customers Who Viewed This Item Also Viewed

Timing Pulleys T5 Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S5M Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S8M Type
MISUMI

Days to Ship : 5 Day(s) or more
Timing Pulleys - L Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - AT5 / AT10 Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - XL Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S3M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Belts with Attachments-T5/T10
MISUMI

Days to Ship : 11 Day(s) or more
Timing Belts/T10
MISUMI

Standard Price : MYR 76.37-

Days to Ship : 1 Day(s) or more
Timing Pulleys - H Type
MISUMI

Days to Ship : 6 Day(s) or more
Keyless Timing Pulleys - T10
MISUMI

Days to Ship : 6 Day(s) or more
Open End Belts/Polyurethane/Chloroprene Rubber
MISUMI

Days to Ship : 1 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Timing Pulleys T10 Type (Part Numbers)

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Belt Width Used(mm)

No. of Teeth(T)

Pulley Shape

Material

Surface Treatment

Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)

Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)

Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)

Shaft Bore Specifications (Round Hole + Tap) [P](mm)

Shaft Bore Specifications (Round Hole) [H](mm)

Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

Shaft Bore Specifications (Stepped Hole) [V](mm)

Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)

Shaft Bore Specifications (Two-stepped Hole) [WB](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm