[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

High Torque Timing Pulleys P5M Type (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

[Material]
· Pulley: Aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, SPCC
[Surface treatment]
· Clear anodize, black anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black oxide

(i)Caution

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

[ ! ]

■P5M

● Pulley Shape

Shape A

Shape B

Standard Tooth Profile

Tooth groove dimensions slightly vary according to the number of teeth.

■Belt Nominal Width / Dimensions

mm	Nominal
mm	P5M100	P5M150	P5M250
A	11.6	16.6	26.6
W	16.0	21.0	31.0
L	28.0	33.0	43.0

■Tapped Hole Dimensions (Shaft Bore Specs.: P, N, C)

d_H7 Shaft Bore I.D.	M (Coarse)	Accessory Set Screws
5 to 12	M4	M4 × 3
13 to 17	M5	M5 × 4
18 to 30	M6	M6 × 5
31 to 45	M8	M8 × 6
46 to 70	M10	M10 × 8

[ ! ] Tapped holes and set screws are applicable to Shaft Bores P, N, and C

[ ! ] Shaft Bore Specs. H (Round Hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes and set screws.
[ ! ] Due to vibrations during transportation, the set screw may become detached from the main body.
[ ! ] The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

● Shaft Bore Specification Select shaft bore spec mark and each dim. from the table below.
[ ! ] Surface treatment may not be applied to the shaft bores.
[ ! ] Shaft Bore Dia. 6.35 is selectable within Shaft Bore Dia. d for Shaft Bore Specs. H, P, V and F.
[ ! ] Specify NK10 if keyway width of 4.0 mm (height 1.8 mm) for shaft bore spec. N and shaft bore diameter of 10 is desired.
[ ! ] For A-Shape pulley with shaft bore spec. P, N, or C, the screw holes are set at around 90° to keep away from peaks.

H Round Hole

P Round Hole + Tap

N New JIS Keyway + Tap
C Old JIS Keyway + Tap

V Stepped Hole

F Stepped Hole (Counterbored Hole on the Hub Side)

Y Both Ends Stepped Hole

WB Two-Stepped Hole

[ ! ] Z-V (d) ≥ 2
[ ! ] Shape A:
3 ≤ J ≤ W-3,
Shape B:
3 ≤ J ≤ L-3

[ ! ] Applicable to
Shape B only
[ ! ] Z-F (d) ≥ 2
[ ! ] 3 ≤ J ≤ L-3

[ ! ] Applicable to
Shape A only
[ ! ] Q (R)-Y (d) ≥ 2
[ ! ] S+T ≤ W-3
[ ! ] S (T) ≥ 3

[ ! ] Applicable to Shape A only
[ ! ] Q-R ≥ 2
[ ! ] R-WB (d) ≥ 2
[ ! ] S+T ≤ W-3
[ ! ] S (T) ≥ 3

Type	Belt Width			[ M ] Material		[ S ] Surface Treatment	[ A ] Accessory Set Screws
	10 mm	15 mm	25 mm	Pulley	Flange
	P5M100	P5M150	P5M250	Pulley	Flange
PTPA	●	●	●	Aluminum alloy	Aluminum alloy	Clear Anodize	SUS304
PTPB	●	●	●			Black Anodize
PTPK	●	●	●			Hard Clear Anodize
PTPN	●	●	●			Electroless nickel plating
PTPM	●	●	●	S45C Equivalent	SPCC	Black Oxide Coating	SCM435 (Black Oxide)
PTPP	●	●	●	S45C Equivalent	SPCC	Electroless nickel plating	SCM435 (Black Oxide)
PTPS	●	●	●	SUS304	SUS304	-	SUS304

[ ! ] Flange is installed.

Specification Table

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(Shaft Bore Specs.: H, P, N, C)

PTPA20P5M150

NK10

Z29

J22

(Shaft Bore Specs.: V, F)

PTPA60P5M100

V20

(Shaft Bore Specs.: Y, WB)

PTPA36P5M150

Y17

Q30

R30

Part number			Pulley Shape	Pulley Shape						P.D.	O.D	D	F	E
Type	Number of Teeth	Type Nominal Width		A			B
				Shaft Bore Specs.: 1 mm Increments / Selectable
				H (d) Round Hole V (d), Y (d), WB (d) Z·Q·R Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped	H (d) Round Hole V ( d ), F ( d ), Z Stepped Hole	P (d) Round Hole + Tapped	N (d), C (d) Keyway + Tapped
Aluminum PTPA PTPB PTPK PTPN Steel PTPM PTPP Stainless Steel PTPS	12	P5M100 P5M150 P5M250	A B	5 to 10	5·6	-	5 to 7	-	-	19.1	17.96	11	22	14
	13									20.69	19.55	12
	14			5 to 11	5 to 8		5 to 9	5		22.28	21.14	13	25	16
	15			5 to 14		8	5 to 11	5 to 7		23.87	22.73	15	28	18
	16			5 to 15	5 to 10		5 to 13	5 to 9	8	25.46	24.32	17	30	20
	17									27.06	25.91
	18			6 to 17	6 to 13	8 to 11	6 to 15	6 to 11	8 to 10	28.65	27.51	19	32	23
	19									30.24	29.1
	20				6 to 15					31.83	30.69		35	25
	21			8 to 22	8 to 17		8 to 19	8 to 15	8 to 13	33.42	32.28	23	40	28
	22					8 to 15	8 to 21	8 to 17	8 to 15	35.01	33.87	25
	23									36.61	35.46
	24				8 to 20					38.2	37.06		44	32
	25			10 to 25	10 to 20	10 to 18	10 to 25	10 to 20	10 to 18	39.79	38.65	30
	26									41.38	40.24		48	36
	27									42.97	41.83
	28			10 to 27	10 to 22	10 to 20	10 to 27	10 to 22	10 to 20	44.56	43.42	32	50	38
	29			12 to 29	12 to 24	12 to 22			12 to 20	46.15	45.01	33	52	40
	30						12 to 29	12 to 24	12 to 22	47.75	46.6	35	55
	31						12 to 30	12 to 25	12 to 23	49.34	48.2	36
	32			12 to 31	12 to 26	12 to 25	12 to 31	12 to 26	12 to 25	50.93	49.79	38
	33			12 to 35	12 to 30					52.52	51.38		61	46
	34						12 to 35	12 to 30		54.11	52.97	42
	35									55.7	54.56
	36				12 to 34	12 to 30		12 to 32	12 to 30	57.3	56.15	44	67	50
	37						12 to 36			58.89	57.75	45
	38									60.48	59.34
	39									62.07	60.93	46
	40			12 to 37	12 to 34	12 to 32	12 to 37	12 to 34	12 to 32	63.66	62.52	48
	41			15 to 43	15 to 42	15 to 38	15 to 37	15 to 34	15 to 32	65.25	64.11		74	58
	42						15 to 39	15 to 38	15 to 36	66.84	65.7	52
	43									68.44	67.29
	44						15 to 43	15 to 42	15 to 38	70.03	68.89	56
	45				15 to 43					71.62	70.48		83	63
	46							15 to 43		73.21	72.07	58
	47									74.8	73.66
	48									76.39	75.25
	49			15 to 47	15 to 45	15 to 40	15 to 47	15 to 45	15 to 40	77.99	76.84	64	87	67
	50									79.58	78.44
	51									81.17	80.03
	52									82.76	81.62
	53									84.35	83.21	70	95	75
	54									85.94	84.8
	55									87.54	86.39
	56			15 to 50			15 to 50			89.13	87.98		99	80
	57									90.72	89.58	75
	58									92.31	91.17
	59									93.9	92.76
	60			15 to 57			15 to 57			95.49	94.35	80	104	84
	72			15 to 85	15 to 70	15 to 50	15 to 84	15 to 70	15 to 50	114.59	113.45	90	119	100
[NG] Shaft Bore Dia.9 is not available for Shaft Bore Spec. N. [NG] Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 50 are not available for Shaft Bore Spec. C. [ ! ] Shaft Bore Dia.6.35 is selectable for Shaft Bore Specs. H, P, V, and F. [ ! ] NK10 is selectable for Shaft Bore Spec. N.

Alterations

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(KC120, etc.)

PTPA60P5M150

H40

BC8.5

Alterations	Set Screw Angle Change	No Flange	Single Flange	Flange Cut
Code	KC120	NFC	RFC·LFC	FC
Spec.	Changes an angle of set screw to 120°. [ ! ] For A-Shape pulley, the screw holes are set at around 120° to keep away from peaks.	(Flange 2 pcs. Included) Ordering Code NFC	(Flange 1 pc. Included) Ordering Code RFC	Cut the flange O.D. in 0.5 mm increments. Ordering Code FC45 Application Notes [ ! ] FC ≥ (O. D.) +1 [ ! ] FC ≤ F-2 [ ! ] No surface treatment is applied on flange circumference.

Alterations

Retaining Ring Groove

Taper for Bearing Holder

Hub Shortening

Tapped Hole Dimensions

Included Set Screw Length Change

Code

SRG

BTC

TPC

SLH

Spec.

Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined.

Specify SRG 2.5 to 12.5 mm
　　　　　0.5 mm Increments
Applicable Conditions [ ! ] Minimum Thickness: 2 mm
[ ! ] Applicable to Shaft Bore Specs. V and F only

[ ! ] Standards of retaining ring groove for Z dim. is applied

[ ! ] n ≤ J-SRG-m
Ordering Code SRG7

Taper for retaining bearing inner ring

Ordering Code BTC5-TL1.5
Application Notes
[ ! ] Applicable to Shape A only
[ ! ] Applicable to Shaft Bore Specs. H and P only
[ ! ] TL < L-W
[ ! ] When E-D ≤ 6, one side installed and 1 pc. of flange included

Cuts the hub length in 0.5 mm increments.

Ordering Code BC6.5
Application Notes
[ ! ] Shaft Bore Specs. H, V, F:
　　3 ≤ BC < L-W
[ ! ] Shaft Bore Specs. P, N, C:
　　M+3 ≤ BC < L-W
[NG] Not applicable to Shape A

Ordering Code TPC5
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

M	TPC
M4	M5
M5	M4·M6
M6	M5·M8
M8	M6
M10	M8

Ordering Code SLH10
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

Set Screws	SLH
M4 × 3	5·8
M5 × 4	6·10
M6 × 5	10
M8 × 6	10·12
M10 × 8	12·15

Alterations	Add Side Holes [ ! ] Conditions may vary depending on the shaft bore specs.
Alterations	Side Tapped Hole	Side Through Hole	Side Counterbored
Code	QTC·QFC·QSC	KTC·KFC·KSC	ZTC·ZFC·ZSC
Spec.	Machines tapped hole on the side surface of hub side. Ordering Code QTC28-M4 Q□C Selection Specify the side hole position (P,C, D dims) in 0.5 mm increments　 M Selection M3, M4, M5, M6, M8 Application Notes [ ! ] Minimum Thickness: 2 mm Shape A: d + M + 4 ≤ Q□C ≤ E- (M+4) For Shaft Bore Spec. V Z + M + 4 ≤ Q□C ≤ E- (M+4) Shape B: d + M + 4 ≤ Q□C ≤ D- (M+4) For Shaft Bore Spec. V Z + M + 4 ≤ Q□C ≤ D- (M+4) [ ! ] When selecting P, N, or C for the Shaft Bore Spec. QTC: Specify KC120 QFC: KC120 is not available QSC: Not available [NG] Not applicable to Shaft Bore Specs. F, Y, or WB.	Machines through hole on the side surface. Ordering Code KTC28-K4.5 K□C Selection Specify the side hole position (P,C, D dims) in 0.5 mm increments　 Specify K K4.0 to 13.0 (0.5 mm Increments) Application Notes [ ! ] Minimum Thickness: 2 mm Shape A: d + K + 4 ≤ K□C ≤ E- (K+4) For Shaft Bore Spec. V Z + K + 4 ≤ K□C ≤ E- (K+4) Shape B: d + K + 4 ≤ K□C ≤ D- (K+4) For Shaft Bore Spec. V Z + K + 4 ≤ K□C ≤ D- (K+4) [ ! ] When selecting P, N, or C for the Shaft Bore Spec. KTC: Specify KC120 KFC: KC120 is not available KSC: Not available [NG] Not applicable to Shaft Bore Specs. F, Y, or WB.	Machines counterbored hole on the side surface. Ordering Code ZTC28-ZM4 Z□C Selection Specify the side hole position (P,C, D dims) in 0.5 mm increments　 ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8 Application Notes [ ! ] Minimum Thickness: 2 mm Shape A: d + d2 + 4 ≤ Z□C ≤ E- (d2 + 4) For Shaft Bore Spec. V Z + d2 + 4 ≤ Z□C ≤ E- (d2 + 4) Shape B: d + d2 + 4 ≤ Z□C ≤ D- (d2 + 4) For Shaft Bore Spec. V Z + d2 + 4 ≤ Z□C ≤ D- (d2 + 4) [ ! ] When selecting P, N, or C for the Shaft Bore Spec. ZTC: Specify KC120 ZFC: KC120 is not available ZSC: Not available [NG] Not applicable to Shaft Bore Specs. F, Y, or WB.
Spec.	(6 Locations) (4 Locations) (3 Locations)	(6 Locations) (4 Locations) (3 Locations)	(6 Locations) (4 Locations) (3 Locations)

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
PTPA50P5M100-A-H[15-42/1]
PTPA50P5M100-A-N[15-40/1]
PTPA50P5M100-A-P[15-40/1]
PTPA50P5M100-A-V[15-30/1]
PTPA50P5M100-A-Y[12-35/1]
PTPA50P5M100-B-C[15,16,18,19,20]
PTPA50P5M100-B-F[15-30/1]
PTPA50P5M100-B-H[15-42/1]
PTPA50P5M100-B-N[15-40/1]
PTPA50P5M100-B-P[15-40/1]
PTPA50P5M100-B-V[15-30/1]
PTPA50P5M150-A-C[15,16,18,19,20]
PTPA50P5M150-A-H[15-42/1]
PTPA50P5M150-A-N[15-40/1]
PTPA50P5M150-A-P[15-40/1]
PTPA50P5M150-A-V[15-30/1]
PTPA50P5M150-A-Y[12-35/1]
PTPA50P5M150-B-C[15,16,18,19,20]
PTPA50P5M150-B-F[15-30/1]
PTPA50P5M150-B-H[15-42/1]
PTPA50P5M150-B-N[15-40/1]
PTPA50P5M150-B-P[15-40/1]
PTPA50P5M150-B-V[15-30/1]
PTPA60P5M100-A-C[15,16,18,19,20]
PTPA60P5M100-A-H[15-52/1]
PTPA60P5M100-A-N[15-40/1]
PTPA60P5M100-A-P[15-40/1]
PTPA60P5M100-A-V[15-30/1]
PTPA60P5M100-A-Y[12-38/1]
PTPA60P5M100-B-C[15,16,18,19,20]
PTPA60P5M100-B-F[15-30/1]
PTPA60P5M100-B-H[15-52/1]
PTPA60P5M100-B-N[15-40/1]
PTPA60P5M100-B-P[15-40/1]
PTPA60P5M100-B-V[15-30/1]
PTPA60P5M150-A-C[15,16,18,19,20]
PTPA60P5M150-A-H[15-52/1]
PTPA60P5M150-A-N[15-40/1]
PTPA60P5M150-A-P[15-40/1]
PTPA60P5M150-A-V[15-30/1]
PTPA60P5M150-A-Y[12-38/1]
PTPA60P5M150-B-C[15,16,18,19,20]
PTPA60P5M150-B-F[15-30/1]
PTPA60P5M150-B-H[15-52/1]
PTPA60P5M150-B-N[15-40/1]
PTPA60P5M150-B-P[15-40/1]
PTPA60P5M150-B-V[15-30/1]
PTPA72P5M100-A-C[15,16,18,19,20]
PTPA72P5M100-A-H[15-80/1]
PTPA72P5M100-A-N[15-50/1]
PTPA72P5M100-A-P[15-65/1]
PTPA72P5M100-A-V[15-80/1]
PTPA72P5M100-A-Y[12-75/1]
PTPA72P5M100-B-C[15,16,18,19,20]
PTPA72P5M100-B-F[15-80/1]
PTPA72P5M100-B-H[15-80/1]
PTPA72P5M100-B-N[15-50/1]
PTPA72P5M100-B-P[15-65/1]
PTPA72P5M100-B-V[15-80/1]
PTPA72P5M150-A-C[15,16,18,19,20]
PTPA72P5M150-A-H[15-80/1]
PTPA72P5M150-A-N[15-50/1]
PTPA72P5M150-A-P[15-65/1]
PTPA72P5M150-A-V[15-80/1]
PTPA72P5M150-A-Y[12-75/1]
PTPA72P5M150-B-C[15,16,18,19,20]
PTPA72P5M150-B-F[15-80/1]
PTPA72P5M150-B-H[15-80/1]
PTPA72P5M150-B-N[15-50/1]
PTPA72P5M150-B-P[15-65/1]
PTPA72P5M150-B-V[15-80/1]
PTPB12P5M100-A-H[5-10/1]
PTPB12P5M100-A-P[5-6/1]
PTPB12P5M100-A-V[5-8/1]
PTPB12P5M100-A-WB[5-8/1]
PTPB12P5M100-A-Y[5-8/1]
PTPB12P5M100-B-F5
PTPB12P5M100-B-H[5-7/1]
PTPB12P5M100-B-P[5-6/1]
PTPB12P5M100-B-V5
PTPB12P5M150-A-H[5-10/1]
PTPB12P5M150-A-P[5-6/1]
PTPB12P5M150-A-V[5-8/1]
PTPB12P5M150-A-WB[5-8/1]
PTPB12P5M150-A-Y[5-8/1]
PTPB12P5M150-B-F5
PTPB12P5M150-B-H[5-7/1]
PTPB12P5M150-B-P[5-6/1]
PTPB12P5M150-B-V5
PTPB14P5M100-A-H[5-11/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Material	Surface Treatment	Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm)	Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N] (mm)	Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C] (mm)	Shaft Bore Specifications (Round Hole + Tap) [P] (mm)	Shaft Bore Specifications (Round Hole) [H] (mm)	Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]	Shaft Bore Specifications (Stepped Hole) [V] (mm)	Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm)	Shaft Bore Specifications (Two-stepped Hole) [WB] (mm)
-	1 Piece(s)	8 Day(s)	10	10	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 42	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	12 ～ 35	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	15 ～ 30	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 42	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 42	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	12 ～ 35	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	15 ～ 30	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 42	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	50	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 52	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	12 ～ 38	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	15 ～ 30	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 52	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 52	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	12 ～ 38	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	15 ～ 30	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 52	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 40	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	60	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 30	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 80	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 65	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 80	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	12 ～ 75	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	15 ～ 80	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 80	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 65	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	10	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 80	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 80	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 65	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 80	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape A	[Aluminum] Aluminum Alloy	Clear Anodize	12 ～ 75	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	15 ～ 20	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	-	15 ～ 80	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	15 ～ 80	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	15 ～ 50	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	15 ～ 65	-	-	-	-	-
-	1 Piece(s)	8 Day(s)	10	15	72	Shape B	[Aluminum] Aluminum Alloy	Clear Anodize	-	-	-	-	-	-	15 ～ 80	-	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	5 ～ 6	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	-	-	5 ～ 8
-	1 Piece(s)	7 Day(s)	10	10	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	5 ～ 8	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	-	5	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	5 ～ 7	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	5 ～ 6	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	10	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	5	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	5 ～ 10	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	5 ～ 6	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	5 ～ 8	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	-	-	5 ～ 8
-	1 Piece(s)	7 Day(s)	10	15	12	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	5 ～ 8	-	-	-	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	-	5	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	5 ～ 7	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	5 ～ 6	-	-	-	-	-
-	1 Piece(s)	7 Day(s)	10	15	12	Shape B	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	-	-	5	-	-
-	1 Piece(s)	7 Day(s)	10	10	14	Shape A	[Aluminum] Aluminum Alloy	Black Anodize	-	-	-	-	5 ～ 11	-	-	-	-

Product TOP

Basic Information

Type	Timing Pulleys	Belt Type	P5M	Timing Pulley / Idler	Pulleys
Features, Areas of Application	Not Applicable	Environmental Compliance	RoHS compliant (10 substances)

Configure

3,216 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Belt Width Used(mm)
10

15
Clear
No. of Teeth(T)
12

14

15

16

18

20

22

24

25

26

28

30

32

34

36

40

44

48

50

60

72
Clear
Pulley Shape
- Shape A
- Shape B
Clear
Material
- Steel
  - S45C Equivalent
- Aluminum
  - Aluminum Alloy
Clear
Surface Treatment
- Black Oxide Coating
- Clear Anodize
- Black Anodize
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
[5-83/1mm Unit(s)]
Clear
Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)
8

10

11
[10-50/1mm Unit(s)]
Clear
Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)
10

12

15

16

18

19

20
Clear
Shaft Bore Specifications (Round Hole + Tap) [P](mm)
5

6

6.35

7

12.7
[5-70/1mm Unit(s)]
Clear
Shaft Bore Specifications (Round Hole) [H](mm)
6.35

12.7
[5-85/1mm Unit(s)]
Clear
Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
10
Clear
Shaft Bore Specifications (Stepped Hole) [V](mm)
5
[5-83/1mm Unit(s)]
Clear
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
5

6.35
[5-82/1mm Unit(s)]
Clear
Shaft Bore Specifications (Two-stepped Hole) [WB](mm)
[5-83/1mm Unit(s)]
Clear
type
- PTPA□□P5M
- PTPB□□P5M
- PTPK□□P5M
- PTPM□□P5M
- PTPN□□P5M
- PTPP□□P5M
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less

11 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI Days to Ship : 5 Day(s) or more

Customers Who Viewed This Item Also Viewed

High Torque Timing Pulleys S5M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - XL Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - L Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S3M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys T5 Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S8M Type
MISUMI

Days to Ship : 5 Day(s) or more
High Torque Timing Pulleys P8M Type
MISUMI

Days to Ship : 7 Day(s) or more
High Torque Timing Pulleys - 5GT Type
MISUMI

Days to Ship : 5 Day(s) or more
High Torque Timing Pulleys P2M/P3M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - H Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S2M Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Belts/P5M
MISUMI

Standard Price : MYR 35.15-

Days to Ship : 2 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

High Torque Timing Pulleys P5M Type (Part Numbers)

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Belt Width Used(mm)

No. of Teeth(T)

Pulley Shape

Material

Surface Treatment

Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)

Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)

Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)

Shaft Bore Specifications (Round Hole + Tap) [P](mm)

Shaft Bore Specifications (Round Hole) [H](mm)

Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

Shaft Bore Specifications (Stepped Hole) [V](mm)

Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)

Shaft Bore Specifications (Two-stepped Hole) [WB](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm