[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Timing Pulleys - MXL Type (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

Volume Discount

[Material]
· Pulley: Aluminum alloy, S45C equivalent, SUS304
· Flange: Aluminum alloy, SPCC, SUS304
[Surface treatment]
· Clear anodize, black anodize, hard clear anodize (firm hardness 300HV~), electroless nickel plating, black iron oxide coating

(i)Caution

Please note that the swaged flange options, NFC, RFC, and LFC, are not reflected in the CAD data.
Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

■MXL

● Pulley Shape

Tooth Profile (ISO Standard Rack Dimensions)

Shape K

Shape A

Shape B

( ): 23 or Less Toothed Pulley

[ ! ]

Tooth groove dimensions slightly vary according to the number of teeth. (Pitch: 2.032mm)

[ ! ] The tolerance of the tap position dimension from the boss end face and pulley end face is ±0.3.
[ ! ] Shaft Bore Specs. H (Round hole), V or F (Stepped Hole), Y (Both Sides Stepped Hole) and WB (Two-stepped Hole) do not have tapped holes.
[ ! ] Unless otherwise specified except for teeth and F dimensions, the dimension tolerance conforms to JIS B 0405 Class m.

● Shaft Bore Specification
Select shaft bore spec mark and each dim. from the table below.

[ ! ] Surface treatment may not be applied to the shaft bores.

H Round Hole

P Round Hole + Tap

N New JIS Keyway + Tap

C Old JIS Keyway + Tap

[ ! ] Not applicable to Shape A

[ ! ] Specify NK10 when selecting the shaft bore dia. 10
and the keyway width 4.0 mm.
[NG] Shape A has keywayed bores only, not tapped holes.

V Stepped Hole

F Stepped Hole

Y Both Ends Stepped Hole

WB Two-stepped Hole

[ NG ] Not applicable to Shape K
[ ! ] Z-V(d) ≥ 2
[ ! ] 2.0 ≤ J ≤ W-2.0

[ ! ] Applicable to Shape B only
[ ! ] Z-F(d) ≥ 2
[ ! ] 2.0 ≤ J ≤ L-2.0

[ ! ] Applicable to Shape A only
[ ! ] Q-Y(d) ≥ 2
[ ! ] R-Y(d) ≥ 2
[ ! ] S+T ≤ W-3.0
[ ! ] S (T) ≥ 3.0

[ ! ] Applicable to Shape A only
[ ! ] Q-R ≥ 2
[ ! ] R-WB(d) ≥ 2
[ ! ] S+T ≤ W-3.0
[ ! ] S (T) ≥ 3.0

■Belt Nominal Width / Dimensions

mm	Nominal
mm	MXL013	MXL019	MXL025	MXL037	MXL050
A	4.5	6.0	7.5	11.0	14.0
W	8.5	10.0	11.5	15.0	18.0
L	14.0	16.5	18.0	22.0	25.0

■Tapped Hole Dimensions
(Shaft Bore Specs.: P, N, C)

d_H7 Shaft Bore I.D.	M (Coarse)	Accessory Set Screws
3 to 5	M3	M3 × 3
6 to 18	M4	M4 × 3
19 to 22	M5	M5 × 4

* In the case of pulley shape B and belt width of 0.13 inches,
the tap size is M4 even if the shaft bore diameter is 19-22.

Dimension Tolerance Without Command

Dimension Range		Tolerance (mm)
Over	or less	Tolerance (mm)
0.5	3	±0.1
3	6	±0.1
6	30	±0.2
30	120	±0.3

[ ! ] Compliant with JIS B 0405
Class m (Medium Class)

■Keyway Dimensions

d dim. Tolerance (H7)

Nominal (N,C)	d_H7
8 to 10(K)	＋0.015 0
11 to 18	＋0.018 0
19 to 30	＋0.021 0
31 to 50	＋0.025 0
51 to 70	＋0.030 0

New JIS Keyway Dimension Tolerance

Nominal (N)	b_JS9		t
8 to 10	3	±0.0125	1.4	＋0.1 0
10K to 12	4	±0.0150	1.8
13 to 17	5		2.3
18 to 22	6		2.8
23 to 30	8	±0.0180	3.3	＋0.2 0
31 to 38	10	±0.0180
39 to 44	12	±0.0215
45 to 50	14		3.8
55	16		4.3

Old JIS Keyway Dimension Tolerance

Nominal (C)	b_JS9		t
10 to 12	4	＋0.022 ＋0.010	1.5	＋0.1 0
15 to 20	5		2

Type	Belt Width					[ M ] Material		[ S ] Surface Treatment	[ A ] Accessory Set Screws
	3.2 mm (1/8 in)	4.8 mm (3/16 in)	6.4 mm (1/4 in)	9.5 mm (3/8 in)	12.7 mm (1/2 in)	Pulley	Flange
	MXL013	MXL019	MXL025	MXL037	MXL050	Pulley	Flange
ATP	●	●	●	●	●	Aluminum alloy	Aluminum alloy	Clear Anodize	SUS304
BTP	●	●	●	●	●			Black Anodize
KTP	●	●	●	●	●			Hard Clear Anodize
NTP	●	●	●	●	●			Electroless nickel plating
MTP	-	-	●	●	-	S45C Equivalent	SPCC	-	SCM435 (Black Oxide)
MTPB	-	-	●	●	-			Black Oxide Coating
MTPP	-	-	●	●	-			Electroless nickel plating
STP	●	●	●	●	●	SUS304	SUS304	-	SUS304

[ ! ] Flange is already swaged, and set screws are included for Shaft Bores P, N and C.
[ ! ] Due to vibrations during transportation, the set screw may become detached from the main body.

Specification Table

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(Shaft Bore Specs.: H, P, N, C)

ATP40MXL025

N10

R16

(Shaft Bore Specs.: V, F)

ATP60MXL037

Z14

J13.0

(Shaft Bore Specs.: Y, WB)

ATP48MXL050

Q16

Part number			Pulley Shape	Pulley Shape					P.D.	O.D	D	F	E
Type	Number of Teeth	Type Nominal Width		A		B·K
				Shaft Bore Specs.
				H Round Hole V·Y·WB Stepped Hole	N·C Keyway	H Round Hole V·F Stepped Hole	P Round Hole Tapped	N·C Keyway Tapped
				d·Z 1 mm Increments / Selectable
Aluminum ATP BTP KTP NTP Steel MTP MTPB MTPP Stainless Steel STP	14	MXL013 MXL019 MXL025 MXL037 MXL050	A K	3·4	-	3·4	3·4	-	9.06	8.55	12	12	6
	15								9.70	9.19
	16			3 to 5		3 to 5	3 to 5		10.35	9.84	14	14	8
	17								11.00	10.49
	18								11.64	11.14
	19								12.29	11.78
	20		A B	3 to 7	-	3 to 6	3 to 5	-	12.94	12.43	9	18	11
	21								13.58	13.07
	22								14.23	13.72
	23			3 to 9		3 to 7	3 to 7		14.88	14.37	11	20	13
	24						3 to 8		15.52	15.02
	25								16.17	15.66
	26			3 to 10		3 to 8	3 to 9		16.82	16.31	12	22	14
	27			4 to 10		4 to 8	4 to 9		17.46	16.96
	28								18.11	17.60
	29								18.76	18.25
	30			4 to 12	8	4 to 10			19.40	18.90	14	25	16
	31								20.05	19.54
	32								20.70	20.19
	33								21.34	20.84
	34								21.99	21.48
	35								22.64	22.13
	36			5 to 14	8 to 11	5 to 12	5 to 10	8	23.29	22.78	16	28	18
	37								23.93	23.42
	38				8 to 12				24.58	24.07
	39			5 to 16	8 to 13	5 to 14	5 to 10	8 to 11	25.23	24.72	18	30	20
	40								25.87	25.36
	41								26.52	26.01
	42								27.17	26.66
	43			5 to 19	8 to 16	5 to 16	5 to 14	8 to 13	27.81	27.30	20	32	23
	44								28.46	27.95
	45								29.11	28.60
	46								29.75	29.24
	47			5 to 21	8 to 17	5 to 18	5 to 16	8 to 14	30.40	29.89	22	35	25
	48								31.05	30.54
	49								31.69	31.19
	50						5 to 18		32.34	31.83
	51			5 to 24	8 to 18	5 to 21	5 to 21	8 to 17	32.99	32.48	25	40	28
	52								33.63	33.13
	53								34.28	33.77
	54								34.93	34.42
	55								35.57	35.07
	56								36.22	35.71
	57			5 to 28	8 to 23	5 to 24	5 to 20	8 to 19	36.87	36.36	28	44	32
	58								37.51	37.01
	59								38.16	37.65
	60								38.81	38.30
	72			5 to 36	8 to 31	5 to 26	5 to 22	8 to 21	46.57	46.06	30	52	40
[NG] Shaft Bore Dia.9 is not available for Shaft Bore Spec. N. [ ! ] Shaft Bore Dia.4.5 and 6.35 are selectable for Shaft Bore Specs. H, P, V and F. [ ! ] NK10 is selectable for Shaft Bore Spec. N. [NG] Shaft Bore Dia. 8, 11, 13, 14, 17, or 21 to 31 are not available for Shaft Bore Spec. C.

Alterations

Part number

Pulley Shape

Shaft Bore Specs.: I.D.

(KC90, etc.)

ATP72MXL050

H12

KSC20

Alterations	Set Screw Angle Change	No Flange	Single Flange	Flange Cut
Code	KC90	NFC	RFC·LFC	FC
Spec.	Changes an angle of set screw to 90°.	(Flange 2 pcs. Included) Ordering Code NFC	(Flange 1 pc. Included) Ordering Code RFC Application Notes [NG] Not applicable to Shape K	Cut the flange O.D. in 0.5 mm increments. Ordering Code FC17 Application Notes [ ! ] FC ≥ (O.D.) +1 [ ! ] FC ≤ F-2 [ ! ] No surface treatment is applied on flange circumference.

Alterations

Retaining Ring Groove

Taper for Bearing Holder

Hub Shortening

Tapped Hole Dimensions

Included Set Screw Length Change

Code

SRG

BTC

TPC

SLH

Spec.

Retaining Ring Groove applicable to the shaft dia. of stepped hole is machined.

Specify SRG 2.5-12 mm
0.5 mm Increments
Applicable Conditions
[ ! ] Minimum Thickness: 2 mm
[ ! ] Applicable to Shaft Bore
Specs. V and F only
[ ! ] Standards of retaining ring groove
for Z dim. is applied

[ ! ] n ≤ J-SRG-m
Ordering Code SRG7

Taper for retaining bearing inner ring

Ordering Code BTC4-TL1.5
Application Notes
[ ! ] Applicable to Shape A only
[ ! ] Applicable to Shaft Bore Specs.
H and P only

[ ! ] TL < L-W
[ ! ] When E-D ≤ 6, one side installed
and 1 pc. of flange included

Cuts the hub length in 0.5 mm increments.
Ordering Code BC6.5
Application Notes

[ ! ] Shaft Bore Specs. H, V, F:
3 ≤ BC < L-W
[ ! ] Shaft Bore Specs. P, N, C:
M+3 ≤ BC < L-W
[NG] Not applicable to
Shape Kand A

Ordering Code TPC5
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

[NG] Not applicable to Shape A

M	TPC
M3	M4
M4	M3·M5
M5	M4

Ordering Code SLH10
Application Notes

[ ! ] Applicable to Shaft Bore Specs. P, N, C only

[NG] Not applicable to Shape A

Set Screw	SLH
M3 × 3	6
M4 × 3	5·8
M5 × 4	6·10

Alterations	Add Side Holes
Alterations	Side Tapped Hole	Side Through Hole	Side Counterbored
Code	QTC·QFC·QSC	KTC·KFC·KSC	ZTC·ZFC·ZSC
Spec.	Machines tapped hole on the side surface of hub side. Ordering Code QTC28-M4 Q□C Selection Specify the hole position (P. C. D. dim.). M Selection M3, M4, M5, M6, M8 Application Notes [NG] Not applicable to Shape K [ ! ] Minimum Thickness: 2 mm [ ! ] Conditions may vary depending on the shaft bore specs. (6 Locations) (4 Locations) (3 Locations)	Machines through hole on the side surface. Ordering Code KTC28-K4.5 K□C Selection Specify the hole position (P. C. D. dim.). Specify K K4.0 to 13.0 (0.5 mm Increments) Application Notes [NG] Not applicable to Shape K [ ! ] Minimum Thickness: 2 mm [ ! ] Conditions may vary depending on the shaft bore specs. (6 Locations) (4 Locations) (3 Locations)	Machines counterbored hole on the side surface. Ordering Code ZTC28-ZM4 Z□C Selection Specify the hole position (P. C. D. dim.). ZM Selection ZM3, ZM4, ZM5, ZM6, ZM8 Application Notes [NG] Not applicable to Shape K [ ! ] Minimum Thickness: 2 mm [ ! ] Conditions may vary depending on the shaft bore specs. (6 Locations) (4 Locations) (3 Locations)

[ ! ] Conditions for side hole alteration vary depending on the shaft bore specification.

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
ATP25MXL025-B-V[3-5/1]
ATP25MXL037-A-H6.35
ATP25MXL037-A-H[3-8/1]
ATP25MXL037-A-V[3-6/1]
ATP25MXL037-A-Y[3-6/1]
ATP25MXL037-B-F[3-5/1]
ATP25MXL037-B-H[3,4,5,6,6.35,7]
ATP25MXL037-B-P[3,4,5,6,6.35,7]
ATP25MXL037-B-V[3-5/1]
ATP25MXL050-A-H6.35
ATP25MXL050-A-H[3-8/1]
ATP25MXL050-A-V[3-6/1]
ATP25MXL050-A-Y[3-6/1]
ATP25MXL050-B-F[3-5/1]
ATP25MXL050-B-H[3,4,5,6,6.35,7]
ATP25MXL050-B-P[3,4,5,6,6.35,7]
ATP25MXL050-B-V[3-5/1]
ATP26MXL019-A-H6.35
ATP26MXL019-A-H[3-9/1]
ATP26MXL019-A-V[3,4,5,6,6.35,7]
ATP26MXL019-A-Y[3-7/1]
ATP26MXL019-B-F[3-6/1]
ATP26MXL019-B-H6.35
ATP26MXL019-B-H[3-8/1]
ATP26MXL019-B-P6.35
ATP26MXL019-B-P[3-8/1]
ATP26MXL019-B-V[3-6/1]
ATP26MXL025-A-H6.35
ATP26MXL025-A-H[3-9/1]
ATP26MXL025-A-V[3,4,5,6,6.35,7]
ATP26MXL025-A-Y[3-7/1]
ATP26MXL025-B-F[3-6/1]
ATP26MXL025-B-H6.35
ATP26MXL025-B-H[3-8/1]
ATP26MXL025-B-P6.35
ATP26MXL025-B-P[3-8/1]
ATP26MXL025-B-V[3-6/1]
ATP26MXL037-A-H6.35
ATP26MXL037-A-H[3-9/1]
ATP26MXL037-A-V[3,4,5,6,6.35,7]
ATP26MXL037-A-Y[3-7/1]
ATP26MXL037-B-F[3-6/1]
ATP26MXL037-B-H6.35
ATP26MXL037-B-H[3-8/1]
ATP26MXL037-B-P6.35
ATP26MXL037-B-P[3-8/1]
ATP26MXL037-B-V[3-6/1]
ATP26MXL050-A-H6.35
ATP26MXL050-A-H[3-9/1]
ATP26MXL050-A-V[3,4,5,6,6.35,7]
ATP26MXL050-A-Y[3-7/1]
ATP26MXL050-B-F[3-6/1]
ATP26MXL050-B-H6.35
ATP26MXL050-B-H[3-8/1]
ATP26MXL050-B-P6.35
ATP26MXL050-B-P[3-8/1]
ATP26MXL050-B-V[3-6/1]
ATP27MXL019-A-H6.35
ATP27MXL019-A-H[4-9/1]
ATP27MXL019-A-V[4,5,6,6.35,7]
ATP27MXL019-A-Y[4-7/1]
ATP27MXL019-B-F[4-6/1]
ATP27MXL019-B-H[4,5,6,6.35,7,8]
ATP27MXL019-B-P[4,5,6,6.35,7,8]
ATP27MXL019-B-V[4-6/1]
ATP27MXL025-A-H6.35
ATP27MXL025-A-H[4-9/1]
ATP27MXL025-A-V[4,5,6,6.35,7]
ATP27MXL025-A-Y[4-7/1]
ATP27MXL025-B-F[4-6/1]
ATP27MXL025-B-H[4,5,6,6.35,7,8]
ATP27MXL025-B-P[4,5,6,6.35,7,8]
ATP27MXL025-B-V[4-6/1]
ATP27MXL037-A-H6.35
ATP27MXL037-A-H[4-9/1]
ATP27MXL037-A-V[4,5,6,6.35,7]
ATP27MXL037-A-Y[4-7/1]
ATP27MXL037-B-F[4-6/1]
ATP27MXL037-B-H[4,5,6,6.35,7,8]
ATP27MXL037-B-P[4,5,6,6.35,7,8]
ATP27MXL037-B-V[4-6/1]
ATP27MXL050-A-H6.35
ATP27MXL050-A-H[4-9/1]
ATP27MXL050-A-V[4,5,6,6.35,7]
ATP27MXL050-A-Y[4-7/1]
ATP27MXL050-B-F[4-6/1]
ATP27MXL050-B-H[4,5,6,6.35,7,8]
ATP27MXL050-B-P[4,5,6,6.35,7,8]
ATP27MXL050-B-V[4-6/1]
ATP28MXL019-A-H6.35

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Belt Width Used (mm)	No. of Teeth (T)	Pulley Shape	Material	Belt Width (Inch)	Surface Treatment	NFCN	Shaft Bore Specifications (Both Ends Stepped Hole) [Y] (mm)	Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N] (mm)	Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C] (mm)	Shaft Bore Specifications (Round Hole + Tap) [P] (mm)	Shaft Bore Specifications (Round Hole) [H] (mm)	Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]	Shaft Bore Specifications (Stepped Hole) [V] (mm)	Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F] (mm)	Shaft Bore Specifications (Two-stepped Hole) [WB] (mm)
-	1 Piece(s)	6 Day(s)	10	6.4	25	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	-	-	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	3 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	3 ～ 6	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	-	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	3 ～ 7	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	3 ～ 7	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	25	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	3 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	3 ～ 6	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	-	3 ～ 5	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	3 ～ 7	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	3 ～ 7	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	25	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	3 ～ 5	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	3 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	-	-	3 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	3 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	-	-	-	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	3 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	3 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	26	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	-	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	3 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	-	-	3 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	3 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	-	-	-	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	3 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	3 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	26	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	-	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	3 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	3 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	3 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	-	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	3 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	3 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	26	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	3 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	3 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	3 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	-	3 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	3 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	6.35	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	3 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	26	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	3 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	4 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	-	-	4 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	4 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	-	-	-	4 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	4 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	4 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	27	Shape B	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	-	-	4 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	4 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	-	-	4 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape A	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	4 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	-	-	-	4 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	4 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	4 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	6.4	27	Shape B	[Aluminum] Aluminum Alloy	0.25	Clear Anodize	-	-	-	-	-	-	-	4 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	4 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	4 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape A	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	4 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	-	4 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	4 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	4 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	9.5	27	Shape B	[Aluminum] Aluminum Alloy	0.37	Clear Anodize	-	-	-	-	-	-	-	4 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	4 ～ 9	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	4 ～ 7	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape A	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	4 ～ 7	-	-	-	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	-	4 ～ 6	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	4 ～ 8	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	4 ～ 8	-	-	-	-	-
-	1 Piece(s)	6 Day(s)	10	12.7	27	Shape B	[Aluminum] Aluminum Alloy	0.5	Clear Anodize	-	-	-	-	-	-	-	4 ～ 6	-	-
-	1 Piece(s)	6 Day(s)	10	4.8	28	Shape A	[Aluminum] Aluminum Alloy	0.19	Clear Anodize	-	-	-	-	-	6.35	-	-	-	-

Product TOP

Basic Information

Type	Timing Pulleys	Belt Type	MXL	Timing Pulley / Idler	Pulleys
Features, Areas of Application	Not Applicable	Environmental Compliance	RoHS compliant (10 substances)

Configure

7,888 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Belt Width Used(mm)
4.8

6.4

9.5

12.7
Clear
No. of Teeth(T)
14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

30

32

34

36

38

40

42

44

46

48

50

60

72
Clear
Pulley Shape
- Shape A
- Shape B
- Shape K
Clear
Material
- Steel
  - S45C Equivalent
- Aluminum
  - Aluminum Alloy
- SUS304
Clear
Belt Width(Inch)
0.19

0.25

0.37

0.5
Clear
Surface Treatment
- Not Provided
- Black Oxide Coating
- Clear Anodize
- Black Anodize
- Hard Clear Anodize
- Electroless Nickel Plating
Clear
NFCN
- NFCN
Clear
Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)
3

4

4.5

5
[3-34/1mm Unit(s)]
Clear
Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)
8

10

11

12

13

14

15

16

17

18
[10-31/1mm Unit(s)]
Clear
Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)
10

12

15

16

18

19

20
Clear
Shaft Bore Specifications (Round Hole + Tap) [P](mm)
3

4

4.5

5

6

6.35

7

8

12.7
[3-22/1mm Unit(s)]
Clear
Shaft Bore Specifications (Round Hole) [H](mm)
3

4

4.5

5

6

6.35

7

8

12.7
[3-36/1mm Unit(s)]
Clear
Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]
10
Clear
Shaft Bore Specifications (Stepped Hole) [V](mm)
3

4

4.5

5

6

6.35

7

8
[3-34/1mm Unit(s)]
Clear
Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)
3

4

4.5

5

6

6.35

7

8
[3-24/1mm Unit(s)]
Clear
Shaft Bore Specifications (Two-stepped Hole) [WB](mm)
3

4

4.5

5
[3-34/1mm Unit(s)]
Clear
type
- ATP□□MXL
- BTP□□MXL
- KTP□□MXL
- MTPB□□MXL
- MTPP□□MXL
- MTP□□MXL
- NTP□□MXL
- STP□□MXL
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

6 Day(s) or Less

7 Day(s) or Less

8 Day(s) or Less

9 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI Days to Ship : 5 Day(s) or more
Cantilever Shafts - Threaded with Retaining Ring Groove - Standard
MISUMI Days to Ship : 5 Day(s) or more
Long Timing Belts-Standard/Backside Cloth Lined/Both Sides Cloth Lined
MISUMI Days to Ship : 3 Day(s) or more

Customers Who Viewed This Item Also Viewed

Timing Belts/MXL/Compatible with the Timing Pulleys MXL
MISUMI

Standard Price : MYR 13.20-

Days to Ship : 1 Day(s) or more
Timing Pulleys - XL Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S5M Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S3M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys - L Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys S2M Type
MISUMI

Days to Ship : 6 Day(s) or more
Timing Pulleys T5 Type
MISUMI

Days to Ship : 6 Day(s) or more
Bar-Shaped Timing Pulleys - MXL, XL, S2M, S3M, S5M
MISUMI

Standard Price : MYR 29.10-

Days to Ship : 2 Day(s) or more
High Torque Timing Pulleys S8M Type
MISUMI

Days to Ship : 5 Day(s) or more
Single Row Deep Groove Ball Bearing (Open Type / Sealed Type / Shielded Type)
NSK

Standard Price : MYR 8.40-

Days to Ship : 1 Day(s) or more
Timing Pulleys - H Type
MISUMI

Days to Ship : 6 Day(s) or more
High Torque Timing Pulleys - 1.5GT / 2GT Type
MISUMI

Days to Ship : 5 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Timing Pulleys - MXL Type (Part Numbers)

(i)Caution

Specification Table

Alterations

Part Number

Basic Information

Configure

Specification/Dimensions

Belt Width Used(mm)

No. of Teeth(T)

Pulley Shape

Material

Belt Width(Inch)

Surface Treatment

NFCN

Shaft Bore Specifications (Both Ends Stepped Hole) [Y](mm)

Shaft Bore Specifications (New JIS Keyway Hole + Tap) [N](mm)

Shaft Bore Specifications (Old JIS Keyway Hole + Tap) [C](mm)

Shaft Bore Specifications (Round Hole + Tap) [P](mm)

Shaft Bore Specifications (Round Hole) [H](mm)

Shaft Bore Specifications (Shaft Bore Dia. 10 Keyway Width 4mm Height 1.8mm) [NK]

Shaft Bore Specifications (Stepped Hole) [V](mm)

Shaft Bore Specifications (Stepped Hole: Counterbored Holes on the Hub Side) [F](mm)

Shaft Bore Specifications (Two-stepped Hole) [WB](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm