[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Low Elasticity Rubber Sheets - HANENITE® (Part Numbers)

Volume Discount

MISUMI

This material is widely used for quiet and low vibration products. Hanenite manufactured by Naigai Rubber Co., Ltd.

(i)Caution

Please check the content on our website as the PDF does not contain the most up-to-date information.

Part Number

Configured Part Number is shown.

Drawing/Specifications
3D Preview
Part Numbers
More Information
Catalog
Technical Information

Dimensional Drawing

■Square Type

■Band Type

■A, B Configurable
- Standard type -

■ Accuracy Standards
T Tolerance

T	Tolerance
1 to 3	±0.3
5·10	±0.4
15 to 30	±0.5

A, B Tolerance

A·B	Tolerance
200 or Less	±0.5
201 to 300	±1.0
301 to 500	±1.5

■A, B Configurable
- Hole Type -

-1 Hole- 1H

-2 Hole- 2H

-3 Hole- 3H

-4 Hole- 4H

-6 Hole- 6H

[ ! ] For Adhesive Type T5 or more, the adhesive tape may tear from the body. Please use it as temporary fixing, or in combination with bolt fixing.
[ ! ] A, B dimension tolerance has been changed. Please refer to the accuracy standards above.

Hole Machining Details

Low Elasticity Rubber Sheets - HANENITE R

(Through Hole)

(Counterbored
Hole)

Screw Nominal Dia.	3	4	5	6	8	10
d	3.5	4.5	5.5	6.5	9	12
d₁	6.5	8	9.5	11	14	17.5
h	3.5	4.5	5.5	6.5	9	11

Product Specifications

A Selectable Type		A, B Configurable Type		Material	Hardness	Color
No Adhesive	Adhesive	No Adhesive	Adhesive	Material	Hardness	Color
UNSE	UNSEA	UNSET	UNSETA	Low Elasticity Rubber (HANENITE^® GP-35LE)	Shore A33	Black
UNLE	UNLEA	UNLET	UNLETA	Low Elasticity Rubber (HANENITE^® GP-60LE)	Shore A49	Black

[ ! ] HANENITE is a registered trademark of Naigai Rubber Industry Co., Ltd.
[ ! ] Adhesive thickness is 0.14 to 0.2 mm.
[ ! ] Has slightly more stickiness.

Characteristic Values of Low Elasticity Rubber

Item	Unit	Low Elasticity Rubber
Item	Unit	(HANENITE^®)
Hardness	Shore A	49	33
Specific Gravity	-	1.27	1.26
Tensile Strength*	Mpa	8.5	11.9
Elongation	%	630	790
Volume Resistivity	(Ω·cm)	-	-
Maximum Operating Temperature	°C	60	60
Temperature of Continuous Use	°C	30	30
Low Temp. Resistance	°C	19	18

[ ! ] Listed values are for reference and not guaranteed.
* The characteristic values of tensile strength and elongation are tested based on the JIS standard K6251.

Specification Table

● Square Type, Band Type

Part Number	—	A
UNSE10	—	100

● A, B Configurable - Standard / Hole Type

Part Number	—	A	—	B	—	F	—	G	—	Screw Nominal Dia.
UNSET10	—	110	—	65
UNSET4H20	—	200	—	150	—	F140	—	G100	—	Z5

■Square Type

Part Number			A Selection
Type		T
No Adhesive UNSE UNLE	Adhesive UNSEA UNLEA	15	250
		20
		30

■Band Type

Part Number			A Selection
Type		T
No Adhesive UNSE UNLE	Adhesive UNSEA UNLEA	1	3 5 10 20 30 40 50 80 100
		2
		3
		5
		10

[ ! ]L dimension is 500 mm.
■A, B Configurable - Standard Type

Part Number		1 mm Increments
Type	T	A	B
No Adhesive UNSET UNLET Adhesive UNSETA UNLETA	1	10 to 350	10 to 350
	2
	3
	5
	10
	15	10 to 250	10 to 250
	20
	30

[ ! ]A ≥ B ≥ T
■A, B Configurable - Hole Type

Part Number			1 mm Increments (A ≥ B ≥ T)		0.5 mm Increments		Screw Nominal Dia. Selection
Type	Nominal	T	A	B	F	G	N (Through Hole)	Z (Counterbored Hole)
No Adhesive UNSET UNLET Adhesive UNSETA UNLETA	1H 2H 3H 4H 6H	1	25 to 350	25 to 350	5 to 345 (1H Type) 9 to 341 (2H, 4H Type) 9 to 170 (3H, 6H Type)	5 to 345 (1H, 2H, 3H Type) 9 to 341 (4H, 6H Type)	3 4 5 6 8 10	—
		2						—
		3						—
		5						—
		10						3	4
		15	25 to 250	25 to 250	9 to 241 (1H, 2H, 4H Type) 9 to 120 (3H, 6H Type)	5 to 245 (1H, 2H, 3H Type) 9 to 241 (4H, 6H Type)			4	5	6	8
		20							4	5	6	8
		30							4	5	6	8	10

[ ! ] A ≥ B ≥ T
[ ! ] Dimension F Specification Range – 1H type selection: d (d1)/2 + 2.5 ≤ F ≤ A - d (d1)/2 - 2.5, when selecting 2H/4H Type: d (d1) + 5 ≤ F ≤ A - d (d1) - 5,
When selecting 3H/6H Type: d (d1) + 5 ≤ F ≤ A/2−d (d1)/2−2.5 is required.
[ ! ] Dimension G Specification Range – 1H/2H/3H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5, when selecting 4H/6H Type: d (d1) + 5 ≤ G ≤ B−d (d1)−5 is required. (d for through holes, d1 for counterbored holes.)

Alterations

Alterations Code	Alteration Details		Applicable Conditions	Alteration Examples
XC	Hole Position From Left	XC = 1 mm Increments	[ ! ] 5 ≤ XC ≤ 336 [ ! ] (2H, 4H Type): d (d₁)/2 + 2.5 ≤ XC ≤ A-F-d (d₁)/2-2.5 [ ! ] (3H, 6H Type): d (d₁)/2 + 2.5 ≤ XC ≤ A-2F-d (d₁)/2-2.5	UNSET4H10 -200-150- F120- G100-N5- XC55
YC	Hole Position From Bottom	YC = 1 mm Increments	[ ! ] 5 ≤ YC ≤ 336 [ ! ] d (d₁ )/2 + 2.5 ≤ YC ≤ B-G-d (d₁)/2-2.5	UNSET4H15 -100-80- F60-G20- Z5-YC40
CCA CCB CCC CCD	Corner Cut	Any corner can be cut. 5 ≤ corner cut ≤ 10 (1 mm Increments) [Ordering Code] (Example) Corners of A and D When cutting with C5 => CCA5-CCD5	[ ! ] 50 ≤ A/B [NG] Applicable to A, B Dimension Configurable Type only [NG] T15, 20, and 30 are not selectable. [NG] A/B dimensions of 501 or higher are not selectable. [NG] Hole Type is not selectable.	UNSET10- 300-200- CCA5-CCC5

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
UNLETA2H20-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[5-245/0.5]-N[3,4,5,6,8,10]
UNLETA2H20-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[5-245/0.5]-Z[4,5,6,8]
UNLETA2H30-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[5-245/0.5]-N[3,4,5,6,8,10]
UNLETA2H30-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[5-245/0.5]-Z[4,5,6,8,10]
UNLETA3-[10-350/1]-[10-350/1]
UNLETA3H1-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[5-345/0.5]-N[3,4,5,6,8,10]
UNLETA3H2-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[5-345/0.5]-N[3,4,5,6,8,10]
UNLETA3H3-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[5-345/0.5]-N[3,4,5,6,8,10]
UNLETA3H5-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[5-345/0.5]-N[3,4,5,6,8,10]
UNLETA3H10-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[5-345/0.5]-N[3,4,5,6,8,10]
UNLETA3H10-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[5-345/0.5]-Z[3,4]
UNLETA3H15-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[5-245/0.5]-N[3,4,5,6,8,10]
UNLETA3H15-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[5-245/0.5]-Z[4,5,6,8]
UNLETA3H20-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[5-245/0.5]-N[3,4,5,6,8,10]
UNLETA3H20-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[5-245/0.5]-Z[4,5,6,8]
UNLETA3H30-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[5-245/0.5]-N[3,4,5,6,8,10]
UNLETA3H30-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[5-245/0.5]-Z[4,5,6,8,10]
UNLETA4H1-[25-350/1]-[25-350/1]-F[9-341/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA4H2-[25-350/1]-[25-350/1]-F[9-341/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA4H3-[25-350/1]-[25-350/1]-F[9-341/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA4H5-[25-350/1]-[25-350/1]-F[9-341/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA4H10-[25-350/1]-[25-350/1]-F[9-341/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA4H10-[25-350/1]-[25-350/1]-F[9-341/0.5]-G[9-341/0.5]-Z[3,4]
UNLETA4H15-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[9-241/0.5]-N[3,4,5,6,8,10]
UNLETA4H15-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[9-241/0.5]-Z[4,5,6,8]
UNLETA4H20-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[9-241/0.5]-N[3,4,5,6,8,10]
UNLETA4H20-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[9-241/0.5]-Z[4,5,6,8]
UNLETA4H30-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[9-241/0.5]-N[3,4,5,6,8,10]
UNLETA4H30-[25-250/1]-[25-250/1]-F[9-241/0.5]-G[9-241/0.5]-Z[4,5,6,8,10]
UNLETA5-[10-350/1]-[10-350/1]
UNLETA6H1-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA6H2-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA6H3-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA6H5-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA6H10-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[9-341/0.5]-N[3,4,5,6,8,10]
UNLETA6H10-[25-350/1]-[25-350/1]-F[9-170/0.5]-G[9-341/0.5]-Z[3,4]
UNLETA6H15-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[9-241/0.5]-N[3,4,5,6,8,10]
UNLETA6H15-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[9-241/0.5]-Z[4,5,6,8]
UNLETA6H20-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[9-241/0.5]-N[3,4,5,6,8,10]
UNLETA6H20-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[9-241/0.5]-Z[4,5,6,8]
UNLETA6H30-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[9-241/0.5]-N[3,4,5,6,8,10]
UNLETA6H30-[25-250/1]-[25-250/1]-F[9-120/0.5]-G[9-241/0.5]-Z[4,5,6,8,10]
UNLETA10-[10-350/1]-[10-350/1]
UNLETA15-[10-250/1]-[10-250/1]
UNLETA20-[10-250/1]-[10-250/1]
UNLETA30-[10-250/1]-[10-250/1]
UNSE1-3
UNSE1-5
UNSE1-10
UNSE1-20
UNSE1-30
UNSE1-40
UNSE1-50
UNSE1-80
UNSE1-100
UNSE2-3
UNSE2-5
UNSE2-10
UNSE2-20
UNSE2-30
UNSE2-40
UNSE2-50
UNSE2-80
UNSE2-100
UNSE3-3
UNSE3-5
UNSE3-10
UNSE3-20
UNSE3-30
UNSE3-40
UNSE3-50
UNSE3-80
UNSE3-100
UNSE5-5
UNSE5-10
UNSE5-20
UNSE5-30
UNSE5-40
UNSE5-50
UNSE5-80
UNSE5-100
UNSE10-10
UNSE10-20
UNSE10-30
UNSE10-40
UNSE10-50
UNSE10-80
UNSE10-100
UNSE15-250
UNSE20-250

Standard Unit Price	Minimum order quantity	Volume Discount	Days to Ship	RoHS	Grade, Type	Width A (mm)	Thickness T (mm)	Length B (mm)	With or Without Adhesive	Hardness (Shore, Asker, Penetration)	Specifications	Hole Machining	Counterbored Hole Nominal Dia. [Z]	F (mm)	G (mm)	Through Hole Nominal Dia. [N]
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	2H (Two Holes)	-	9 ～ 241	5 ～ 245	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	2H (Two Holes)	4 ～ 8	9 ～ 241	5 ～ 245	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	2H (Two Holes)	-	9 ～ 241	5 ～ 245	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	2H (Two Holes)	4 ～ 10	9 ～ 241	5 ～ 245	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	10 ～ 350	3	10 ～ 350	With Adhesive	A49	A, B Configurable Type	No Hole Machining	-	-	-	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	1	25 ～ 350	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 170	5 ～ 345	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	2	25 ～ 350	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 170	5 ～ 345	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	3	25 ～ 350	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 170	5 ～ 345	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	5	25 ～ 350	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 170	5 ～ 345	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	10	25 ～ 350	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 170	5 ～ 345	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	10	25 ～ 350	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	3 ～ 4	9 ～ 170	5 ～ 345	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	15	25 ～ 250	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 120	5 ～ 245	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	15	25 ～ 250	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	4 ～ 8	9 ～ 120	5 ～ 245	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 120	5 ～ 245	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	4 ～ 8	9 ～ 120	5 ～ 245	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	-	9 ～ 120	5 ～ 245	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	3H (Three Holes)	4 ～ 10	9 ～ 120	5 ～ 245	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	1	25 ～ 350	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 341	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	2	25 ～ 350	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 341	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	3	25 ～ 350	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 341	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	5	25 ～ 350	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 341	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	10	25 ～ 350	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 341	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	10	25 ～ 350	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	3 ～ 4	9 ～ 341	9 ～ 341	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	15	25 ～ 250	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 241	9 ～ 241	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	15	25 ～ 250	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	4 ～ 8	9 ～ 241	9 ～ 241	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 241	9 ～ 241	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	4 ～ 8	9 ～ 241	9 ～ 241	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	-	9 ～ 241	9 ～ 241	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	4H (Four Holes)	4 ～ 10	9 ～ 241	9 ～ 241	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	10 ～ 350	5	10 ～ 350	With Adhesive	A49	A, B Configurable Type	No Hole Machining	-	-	-	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	1	25 ～ 350	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 170	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	2	25 ～ 350	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 170	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	3	25 ～ 350	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 170	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	5	25 ～ 350	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 170	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	10	25 ～ 350	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 170	9 ～ 341	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 350	10	25 ～ 350	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	3 ～ 4	9 ～ 170	9 ～ 341	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	15	25 ～ 250	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 120	9 ～ 241	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	15	25 ～ 250	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	4 ～ 8	9 ～ 120	9 ～ 241	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 120	9 ～ 241	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	20	25 ～ 250	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	4 ～ 8	9 ～ 120	9 ～ 241	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	-	9 ～ 120	9 ～ 241	3 ～ 10
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	25 ～ 250	30	25 ～ 250	With Adhesive	A49	A, B Configurable Type	6H (Six Holes)	4 ～ 10	9 ～ 120	9 ～ 241	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	10 ～ 350	10	10 ～ 350	With Adhesive	A49	A, B Configurable Type	No Hole Machining	-	-	-	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	10 ～ 250	15	10 ～ 250	With Adhesive	A49	A, B Configurable Type	No Hole Machining	-	-	-	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	10 ～ 250	20	10 ～ 250	With Adhesive	A49	A, B Configurable Type	No Hole Machining	-	-	-	-
-	1 Piece(s)		6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-60LE	10 ～ 250	30	10 ～ 250	With Adhesive	A49	A, B Configurable Type	No Hole Machining	-	-	-	-
MYR 10.51	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	3	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 12.01	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	5	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 13.99	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	10	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 23.01	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	20	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 31.52	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	30	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 40.57	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	40	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 53.08	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	50	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 70.10	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	80	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 94.61	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	100	1	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 12.51	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	3	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 13.99	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	5	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 16.51	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	10	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 27.00	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	20	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 39.04	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	30	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 50.55	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	40	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 66.10	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	50	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 89.61	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	80	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 108.68	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	100	2	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 14.48	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	3	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 15.50	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	5	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 19.53	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	10	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 36.54	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	20	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 46.05	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	30	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 60.07	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	40	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 78.12	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	50	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 108.68	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	80	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 130.15	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	100	3	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 18.51	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	5	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 25.02	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	10	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 44.07	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	20	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 64.10	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	30	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 83.61	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	40	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 108.68	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	50	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 155.24	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	80	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 185.77	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	100	5	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 45.56	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	10	10	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 74.11	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	20	10	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 100.15	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	30	10	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 123.67	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	40	10	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 185.77	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	50	10	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 268.41	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	80	10	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 338.02	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	100	10	500	No Adhesive	A33	Band Type	No Hole Machining	-	-	-	-
MYR 423.63	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	250	15	250	No Adhesive	A33	Square Type	No Hole Machining	-	-	-	-
MYR 518.77	1 Piece(s)	Available	6 Day(s) or more	10	[Low Elasticity Rubber] HANENITE®GP-35LE	250	20	250	No Adhesive	A33	Square Type	No Hole Machining	-	-	-	-

App. Example

Low Elasticity Rubber Sheets - Hanenaito R - Example

Other Rubbers

Low Elasticity Rubber (HANENITE）

Product TOP

Basic Information

Environmentally friendly	RoHS Compliant (10 Substances)	Characteristics/Applications	Not Applicable	Material	Rubber

Configure

452 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Grade, Type
- Low Elasticity Rubber
  - HANENITE®GP-60LE
  - HANENITE®GP-35LE
Clear
Width A(mm)
3

5

10

20

30

40

50

80

100

250
[10-350/1mm Unit(s)]
Clear
Thickness T(mm)
1

2

3

5

10

15

20

30
Clear
Length B(mm)
250

500
[10-350/1mm Unit(s)]
Clear
With or Without Adhesive
- With Adhesive
- No Adhesive
Clear
Hardness (Shore, Asker, Penetration)
A33

A49
Clear
Specifications
A, B Configurable Type

Band Type

Square Type
Clear
Hole Machining
1H (One Hole)

2H (Two Holes)

3H (Three Holes)

4H (Four Holes)

6H (Six Holes)

No Hole Machining
Clear
Counterbored Hole Nominal Dia. [Z]
3

4

5

6

8

10
Clear
F(mm)
[4.5-345/0.5mm Unit(s)]
Clear
G(mm)
[5-495/0.5mm Unit(s)]
Clear
Through Hole Nominal Dia. [N]
3

4

5

6

8

10
Clear
type
- UNLE
- UNLEA
- UNLET
- UNLET1H
- UNLET2H
- UNLET3H
- UNLET4H
- UNLET6H
- UNLETA
- UNLETA1H
- UNLETA2H
- UNLETA3H
- UNLETA4H
- UNLETA6H
- UNSE
- UNSEA
- UNSET
- UNSET1H
- UNSET2H
- UNSET3H
- UNSET4H
- UNSET6H
- UNSETA
- UNSETA1H
- UNSETA2H
- UNSETA3H
- UNSETA4H
- UNSETA6H
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

2 Day(s) or Less

4 Day(s) or Less

6 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Bumpers with Metal Washer - Urethane, Antistatic Polyurethane, Rubber
MISUMI Days to Ship : 2 Day(s) or more
Urethane / Rubbers - Spherical Tip
MISUMI Days to Ship : 6 Day(s) or more
Urethane / Rubbers - Piloted Type
MISUMI Days to Ship : 1 Day(s) or more
Urethane / Rubber Baked Bumpers - Threaded Type
MISUMI Days to Ship : 1 Day(s) or more
Double-Sided Adhesive Tape for Rubber Standard Type for Silicon
MISUMI Standard Price : MYR 30.81- Days to Ship : 2 Day(s) or more

Customers Who Viewed This Item Also Viewed

Nitrile Rubber Sheets- Adhesive/ No Adhesive
MISUMI

Days to Ship : 5 Day(s) or more
Urethane Sponge Sheets, Rubber Sponge Sheets
MISUMI

Days to Ship : 1 Day(s) or more
Silicon Rubber Sheets, High Strength Silicon Rubber Sheets
MISUMI

Days to Ship : 1 Day(s) or more
Highly Abrasion Resistant Sheets, Heat Resistant Urethane Sheets - Vulkollan® / Abrasion Resistant Urethane
MISUMI

Days to Ship : 4 Day(s) or more
Fluororubber Sheets - Standard/ Hole Type
MISUMI

Days to Ship : 1 Day(s) or more
Urethane Sheets, Adhesives for Urethane - Square, Band
MISUMI

Days to Ship : 1 Day(s) or more
Nonskid Rubber Sheets, Double Sided Adhesive Tape for Rubber
MISUMI

Days to Ship : 4 Day(s) or more
Chloroprene / Non-Staining Chloroprene Rubber Sheets
MISUMI

Days to Ship : 5 Day(s) or more
Urethane / Rubber Blocks
MISUMI

Days to Ship : 6 Day(s) or more
Hanenaito® / Low Rebound / Low Strain Sponge Sheets
MISUMI

Days to Ship : 6 Day(s) or more
Low Friction Rubber Sheets - Nitrile Rubber Sheets, Silicon Rubber Sheets
MISUMI

Days to Ship : 2 Day(s) or more
Extra Low Hardness Urethane Sheets
MISUMI

Days to Ship : 8 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Low Elasticity Rubber Sheets - HANENITE® (Part Numbers)

(i)Caution

Dimensional Drawing

Product Specifications

Specification Table

Alterations

Part Number

App. Example

Basic Information

Configure

Specification/Dimensions

Grade, Type

Width A(mm)

Thickness T(mm)

Length B(mm)

With or Without Adhesive

Hardness (Shore, Asker, Penetration)

Specifications

Hole Machining

Counterbored Hole Nominal Dia. [Z]

F(mm)

G(mm)

Through Hole Nominal Dia. [N]

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm