(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Low Elasticity Rubber Sheets - HANENITE® (Part Numbers)
- Volume Discount
This material is widely used for quiet and low vibration products. Hanenite manufactured by Naigai Rubber Co., Ltd.
(i)Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
Dimensional Drawing
- Standard type -
T Tolerance
| T | Tolerance |
| 1 to 3 | ±0.3 |
| 5·10 | ±0.4 |
| 15 to 30 | ±0.5 |
A, B Tolerance
| A·B | Tolerance |
| 200 or Less | ±0.5 |
| 201 to 300 | ±1.0 |
| 301 to 500 | ±1.5 |
- Hole Type -
[ ! ] For Adhesive Type T5 or more, the adhesive tape may tear from the body. Please use it as temporary fixing, or in combination with bolt fixing.
[ ! ] A, B dimension tolerance has been changed. Please refer to the accuracy standards above.
| Hole Machining Details | |||||||||||||||||||||||||||||
 N (Through Hole) Z (Counterbored Hole) |
| ||||||||||||||||||||||||||||
Product Specifications
| A Selectable Type | A, B Configurable Type | Material | Hardness | Color | ||
| No Adhesive | Adhesive | No Adhesive | Adhesive | |||
| UNSE | UNSEA | UNSET | UNSETA | Low Elasticity Rubber (HANENITE® GP-35LE) | Shore A33 | Black |
| UNLE | UNLEA | UNLET | UNLETA | Low Elasticity Rubber (HANENITE® GP-60LE) | Shore A49 | Black |
[ ! ] Adhesive thickness is 0.14 to 0.2 mm.
[ ! ] Has slightly more stickiness.
Item | Unit | Low Elasticity Rubber | |
| (HANENITE®) | |||
| Hardness | Shore A | 49 | 33 |
| Specific Gravity | - | 1.27 | 1.26 |
| Tensile Strength* | Mpa | 8.5 | 11.9 |
| Elongation | % | 630 | 790 |
| Volume Resistivity | (Ω·cm) | - | - |
| Maximum Operating Temperature | °C | 60 | 60 |
| Temperature of Continuous Use | °C | 30 | 30 |
| Low Temp. Resistance | °C | 19 | 18 |
* The characteristic values of tensile strength and elongation are tested based on the JIS standard K6251.
Specification Table
| Part Number | — | A |
| UNSE10 | — | 100 |
| Part Number | — | A | — | B | — | F | — | G | — | Screw Nominal Dia. |
| UNSET10 | — | 110 | — | 65 | ||||||
| UNSET4H20 | — | 200 | — | 150 | — | F140 | — | G100 | — | Z5 |
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive UNSE UNLE | Adhesive UNSEA UNLEA | 15 | 250 |
| 20 | |||
| 30 | |||
| Part Number | A Selection | ||
| Type | T | ||
| No Adhesive UNSE UNLE | Adhesive UNSEA UNLEA | 1 | 3 5 10 20 30 40 50 80 100 |
| 2 | |||
| 3 | |||
| 5 | |||
| 10 | |||
■A, B Configurable - Standard Type
| Part Number | 1 mm Increments | ||
| Type | T | A | B |
| No Adhesive UNSET UNLET Adhesive UNSETA UNLETA | 1 | 10 to 350 | 10 to 350 |
| 2 | |||
| 3 | |||
| 5 | |||
| 10 | |||
| 15 | 10 to 250 | 10 to 250 | |
| 20 | |||
| 30 | |||
■A, B Configurable - Hole Type
| Part Number | 1 mm Increments (A ≥ B ≥ T) | 0.5 mm Increments | Screw Nominal Dia. Selection | ||||||||||
| Type | Nominal | T | A | B | F | G | N (Through Hole) | Z (Counterbored Hole) | |||||
| No Adhesive UNSET UNLET Adhesive UNSETA UNLETA | 1H 2H 3H 4H 6H | 1 | 25 to 350 | 25 to 350 | 5 to 345 (1H Type) 9 to 341 (2H, 4H Type) 9 to 170 (3H, 6H Type) | 5 to 345 (1H, 2H, 3H Type) 9 to 341 (4H, 6H Type) | 3 4 5 6 8 10 | — | |||||
| 2 | — | ||||||||||||
| 3 | — | ||||||||||||
| 5 | — | ||||||||||||
| 10 | 3 | 4 | |||||||||||
| 15 | 25 to 250 | 25 to 250 | 9 to 241 (1H, 2H, 4H Type) 9 to 120 (3H, 6H Type) | 5 to 245 (1H, 2H, 3H Type) 9 to 241 (4H, 6H Type) | 4 | 5 | 6 | 8 | |||||
| 20 | 4 | 5 | 6 | 8 | |||||||||
| 30 | 4 | 5 | 6 | 8 | 10 | ||||||||
[ ! ] Dimension F Specification Range – 1H type selection: d (d1)/2 + 2.5 ≤ F ≤ A - d (d1)/2 - 2.5, when selecting 2H/4H Type: d (d1) + 5 ≤ F ≤ A - d (d1) - 5,
When selecting 3H/6H Type: d (d1) + 5 ≤ F ≤ A/2−d (d1)/2−2.5 is required.
[ ! ] Dimension G Specification Range – 1H/2H/3H type selection: d (d1)/2 + 2.5 ≤ G ≤ B - d (d1)/2 - 2.5, when selecting 4H/6H Type: d (d1) + 5 ≤ G ≤ B−d (d1)−5 is required. (d for through holes, d1 for counterbored holes.)
Alterations
| Alterations Code | Alteration Details | Applicable Conditions | Alteration Examples | |
| XC | Hole Position From Left | XC = 1 mm Increments | [ ! ] 5 ≤ XC ≤ 336 [ ! ] (2H, 4H Type): d (d1)/2 + 2.5 ≤ XC ≤ A-F-d (d1)/2-2.5 [ ! ] (3H, 6H Type): d (d1)/2 + 2.5 ≤ XC ≤ A-2F-d (d1)/2-2.5 | UNSET4H10 -200-150- F120- G100-N5- XC55 |
| YC | Hole Position From Bottom | YC = 1 mm Increments | [ ! ] 5 ≤ YC ≤ 336 [ ! ] d (d1 )/2 + 2.5 ≤ YC ≤ B-G-d (d1)/2-2.5 | UNSET4H15 -100-80- F60-G20- Z5-YC40 |
| CCA CCB CCC CCD | Corner Cut | Any corner can be cut. 5 ≤ corner cut ≤ 10 (1 mm Increments) [Ordering Code] (Example) Corners of A and D When cutting with C5 => CCA5-CCD5 | [ ! ] 50 ≤ A/B [NG] Applicable to A, B Dimension Configurable Type only [NG] T15, 20, and 30 are not selectable. [NG] A/B dimensions of 501 or higher are not selectable. [NG] Hole Type is not selectable. | UNSET10- 300-200- CCA5-CCC5 |
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Grade, Type | Width A (mm) | Thickness T (mm) | Length B (mm) | With or Without Adhesive | Hardness (Shore, Asker, Penetration) | Specifications | Hole Machining | Counterbored Hole Nominal Dia. [Z] | F (mm) | G (mm) | Through Hole Nominal Dia. [N] |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 11.49 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 3 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 13.01 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 15.01 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 25.02 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 34.54 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 44.57 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 58.06 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 77.10 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 103.63 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 1 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 13.49 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 3 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 15.01 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 18.05 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 29.54 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 42.56 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 55.57 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 72.57 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 98.16 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 119.15 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 2 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 15.50 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 3 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 17.01 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 21.04 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 40.07 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 50.55 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 66.10 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 85.63 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 119.15 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 143.22 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 3 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 20.02 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 27.51 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 48.06 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 70.10 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 91.62 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 119.15 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 170.74 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 204.31 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 5 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 50.04 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 10 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 81.10 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 10 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 110.18 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 10 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 135.69 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 10 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 204.31 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 10 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 294.96 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 10 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 371.54 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 10 | 500 | No Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 465.67 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 250 | 15 | 250 | No Adhesive | A49 | Square Type | No Hole Machining | - | - | - | - | |
MYR 570.34 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 250 | 20 | 250 | No Adhesive | A49 | Square Type | No Hole Machining | - | - | - | - | |
MYR 826.76 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 250 | 30 | 250 | No Adhesive | A49 | Square Type | No Hole Machining | - | - | - | - | |
MYR 12.51 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 3 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 13.99 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 16.51 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 27.51 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 37.52 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 48.57 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 63.58 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 84.58 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 113.66 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 1 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 14.48 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 3 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 16.51 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 19.53 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 32.04 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 46.55 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 61.09 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 79.62 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 107.64 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 130.67 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 2 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 17.01 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 3 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 18.51 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 23.01 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 44.07 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 55.57 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 72.57 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 94.11 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 130.67 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 157.22 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 3 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 22.02 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 5 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 30.07 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 52.58 | 1 Piece(s) | Available | 4 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 77.10 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 100.63 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 130.67 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 187.75 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 224.33 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 5 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 55.07 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 10 | 10 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 89.15 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 20 | 10 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 121.18 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 30 | 10 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 149.21 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 40 | 10 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 224.33 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 50 | 10 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 323.96 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 80 | 10 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 408.59 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 100 | 10 | 500 | With Adhesive | A49 | Band Type | No Hole Machining | - | - | - | - | |
MYR 512.27 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 250 | 15 | 250 | With Adhesive | A49 | Square Type | No Hole Machining | - | - | - | - | |
MYR 626.92 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 250 | 20 | 250 | With Adhesive | A49 | Square Type | No Hole Machining | - | - | - | - | |
MYR 909.38 | 1 Piece(s) | Available | 6 Day(s) or more | 10 | [Low Elasticity Rubber] HANENITE®GP-60LE | 250 | 30 | 250 | With Adhesive | A49 | Square Type | No Hole Machining | - | - | - | - |
Loading...
App. Example
Basic Information
| Environmentally friendly | RoHS Compliant (10 Substances) | Characteristics/Applications | Not Applicable | Material | Rubber |
|---|
Specification/Dimensions
-
Grade, Type
- Low Elasticity Rubber
- Low Elasticity Rubber
-
Width A(mm)
-
Thickness T(mm)
-
Length B(mm)
-
With or Without Adhesive
- With Adhesive
- No Adhesive
-
Hardness (Shore, Asker, Penetration)
-
Specifications
-
Hole Machining
-
Counterbored Hole Nominal Dia. [Z]
-
F(mm)
-
G(mm)
-
Through Hole Nominal Dia. [N]
-
type
- UNLE
- UNLEA
- UNLET
- UNLET1H
- UNLET2H
- UNLET3H
- UNLET4H
- UNLET6H
- UNLETA
- UNLETA1H
- UNLETA2H
- UNLETA3H
- UNLETA4H
- UNLETA6H
- UNSE
- UNSEA
- UNSET
- UNSET1H
- UNSET2H
- UNSET3H
- UNSET4H
- UNSET6H
- UNSETA
- UNSETA1H
- UNSETA2H
- UNSETA3H
- UNSETA4H
- UNSETA6H
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 2 Day(s) or Less
- 4 Day(s) or Less
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Nonskid Rubber Sheets, Double Sided Adhesive Tape for Rubber
- Hanenaito® / Low Rebound / Low Strain Sponge Sheets
- Heat and Sound Insulation Sponges Melamine Resin Foam
- Low Rebound Urethane Foam PUF
- Togawa Electrically Conductive Rubber Sheet
- Fluoroelastomer Sheet
- CALMFLEX, F-2
- Absorbent Pad Roll
Complementary Products
-
Bumpers with Metal Washer - Urethane, Antistatic Polyurethane, Rubber
MISUMI Days to Ship : 2 Day(s) or more
-
Double-Sided Adhesive Tape for Rubber Standard Type for Silicon
MISUMI Standard Price : MYR 30.81- Days to Ship : 2 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
-
-
-
Highly Abrasion Resistant Sheets, Heat Resistant Urethane Sheets - Vulkollan® / Abrasion Resistant UrethaneMISUMI
Days to Ship : 4 Day(s) or more
-
-
-
-
-
-
-
Low Friction Rubber Sheets - Nitrile Rubber Sheets, Silicon Rubber SheetsMISUMI
Days to Ship : 2 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy