(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Round Wire Coil Springs - L Dimension Configurable, O.D. Referenced Stainless Steel
Outer diameter size (Φ9, Φ11, Φ13, Φ15, Φ17, Φ25, Φ27) standard added!
A compression spring that can specify the L dimension in units of 1 mm.
The outer diameter and length can be freely specified according to the intended use.
Piano wire is also based on the outer diameter.
Part Number
Configured Part Number is shown.
 |
| |||||||||||||
| ||||||||||||||
| Type | Allowable Deflection | [M] Material |
| FWR | F = L × 60% | SWP−A |
| FWF | F = L × 50% | |
| FWT | F = L × 40% | |
| FUR | F = L × 60% | SUS304−WPB |
| FUF | F = L × 50% | |
| FUT | F = L × 40% |
[ ! ] No grinding on both ends for d less than 0.9.
[ ! ] P is for reference only.
[ ! ] Load types A and B have a different number of coils, so the P dimension is different.
Specification Table
| Part Number | — | L | — | Load Type A·B |
| FWF10 | — | 119 | — | A |
| Part Number | 1 mm Increments L | Load Type Selection | Max. Load N[kgf] | d | P (Reference) | ||||||||||
| SWP－A | SUS304－WPB | FWR FUR | FWF FUF | FWT FUT | FWR FUR | FWF FUF | FWT FUT | ||||||||
| Type | D | FWR60% | FWF50% | FWT40% | FUR60% | FUF50% | FUT40% | ||||||||
| FWR FWF FWT (SWP－A) FUR FUF FUT (SUS304－WPB) | 5 | 15 to 65 | A | 2.8 {0.29} | 5.2 {0.53} | 8.1 {0.83} | 2.5 {0.25} | 4.5 {0.46} | 7.1 {0.73} | 0.4 | 0.5 | 0.6 | 1.8 | 1.5 | 1.3 |
| B | 3.7 {0.38} | 6.7 {0.69} | 10.6 {1.08} | 3.3 {0.33} | 5.9 {0.60} | 9.3 {0.95} | 2.3 | 1.9 | 1.7 | ||||||
| 6 | 15 to 80 | A | 2.9 {0.30} | 7.3 {0.75} | 9.9 {1.01} | 2.5 {0.26} | 6.4 {0.65} | 8.7 {0.89} | 0.45 | 0.6 | 0.7 | 2.0 | 1.7 | 1.5 | |
| B | 3.8 {0.38} | 9.6 {0.97} | 12.9 {1.32} | 3.3 {0.34} | 8.4 {0.85} | 11.3 {1.15} | 2.6 | 2.3 | 1.9 | ||||||
| 7 | 15 to 90 | A | 3.1 {0.32} | 10.1 {1.03} | 11.5 {1.17} | 2.7 {0.28} | 8.8 {0.90} | 10.0 {1.02} | 0.5 | 0.7 | 0.8 | 2.2 | 2.0 | 1.7 | |
| B | 4.0 {0.41} | 13.1 {1.34} | 14.9 {1.52} | 3.5 {0.36} | 11.5 {1.17} | 13.0 {1.33} | 2.9 | 2.7 | 2.2 | ||||||
| 8 | 20 to 100 | A | 5.2 {0.53} | 12.2 {1.24} | 13.8 {1.41} | 4.6 {0.47} | 10.7 {1.09} | 12.1 {1.23} | 0.6 | 0.8 | 0.9 | 2.7 | 2.2 | 1.9 | |
| B | 6.8 {0.70} | 15.9 {1.62} | 17.9 {1.83} | 6.0 {0.61} | 13.9 {1.42} | 15.7 {1.60} | 3.5 | 2.9 | 2.4 | ||||||
| 9 | 19 to 110 | A | 8.1 {0.83} | 17.4 {1.78} | 22.1 {2.25} | 7.1 {0.72} | 15.2 {1.56} | 19.3 {1.97} | 0.7 | 0.9 | 1.0 | 2.9 | 2.5 | 2.6 | |
| B | 10.0 {1.02} | 20.6 {2.09} | 27.5 {2.80} | 8.7 {0.89} | 17.9 {1.83} | 24.0 {2.45} | 3.5 | 2.9 | 3.3 | ||||||
| 10 | 20 to 120 | A | 10.6 {1.08} | 19.2 {1.96} | 30.5 {3.11} | 9.3 {0.95} | 16.9 {1.72} | 26.7 {2.72} | 0.8 | 1.0 | 1.2 | 3.4 | 2.8 | 2.5 | |
| B | 13.7 {1.40} | 24.9 {2.54} | 39.5 {4.03} | 12.1 {1.23} | 21.8 {2.22} | 34.6 {3.53} | 4.4 | 3.6 | 3.2 | ||||||
| 11 | 21 to 130 | A | 9.0 {0.92} | 17.2 {1.75} | 27.9 {2.85} | 7.9 {0.80} | 15.0 {1.53} | 24.4 {2.49} | 0.8 | 1.0 | 1.2 | 3.5 | 3.3 | 2.9 | |
| B | 12.6 {1.28} | 22.9 {2.33} | 36.3 {3.70} | 11.0 {1.12} | 20.0 {2.04} | 31.7 {3.24} | 4.9 | 4.3 | 3.8 | ||||||
| 12 | 25 to 140 | A | 11.0 {1.12} | 27.6 {2.81} | 37.7 {3.84} | 9.6 {0.98} | 24.1 {2.46} | 33.0 {3.34} | 0.9 | 1.2 | 1.4 | 3.8 | 3.3 | 2.9 | |
| B | 14.2 {1.45} | 35.8 {3.65} | 48.9 {4.99} | 12.5 {1.27} | 31.3 {3.19} | 42.9 {4.37} | 4.9 | 4.3 | 3.8 | ||||||
| 13 | 24 to 150 | A | 10.5 {1.07} | 26.5 {2.70} | 35.7 {3.63} | 9.1 {0.93} | 23.2 {2.37} | 31.1 {3.18} | 0.9 | 1.2 | 1.4 | 4.2 | 3.9 | 3.3 | |
| B | 13.4 {1.37} | 34.6 {3.52} | 46.4 {4.73} | 11.7 {1.20} | 30.2 {3.08} | 40.5 {4.13} | 5.5 | 5.1 | 4.3 | ||||||
| 14 | 30 to 160 | A | 11.6 {1.18} | 37.7 {3.84} | 45.9 {4.68} | 10.1 {1.03} | 33.0 {3.36} | 40.2 {4.10} | 1.0 | 1.4 | 1.6 | 4.2 | 3.9 | 3.3 | |
| B | 15.1 {1.54} | 48.9 {4.99} | 59.6 {6.08} | 13.1 {1.34} | 42.8 {4.36} | 52.2 {5.32} | 5.5 | 5.1 | 4.3 | ||||||
| 15 | 27 to 170 | A | 11.4 {1.16} | 36.8 {3.75} | 44.4 {4.53} | 9.9 {1.01} | 32.1 {3.28} | 38.8 {3.96} | 1.0 | 1.4 | 1.6 | 5.0 | 4.5 | 3.7 | |
| B | 14.9 {1.51} | 47.1 {4.80} | 56.6 {5.77} | 14.9 {1.33} | 41.1 {4.20} | 49.4 {5.05} | 6.5 | 5.8 | 4.8 | ||||||
| 16 | 30 to 180 | A | 19.4 {1.98} | 49.7 {5.07} | 55.1 {5.62} | 17.0 {1.73} | 43.4 {4.43} | 48.2 {4.91} | 1.2 | 1.6 | 1.8 | 5.0 | 4.5 | 3.7 | |
| B | 25.1 {2.56} | 64.5 {6.58} | 71.2 {7.26} | 22.0 {2.24} | 56.5 {5.76} | 62.6 {6.38} | 6.5 | 5.8 | 4.8 | ||||||
| 17 | 31 to 190 | A | 19.6 {2.00} | 47.9 {4.88} | 53.5 {5.45} | 17.1 {1.75} | 41.8 {4.27} | 46.7 {4.77} | 1.2 | 1.6 | 1.8 | 5.9 | 5.0 | 4.1 | |
| B | 25.3 {2.57} | 62.0 {6.32} | 69.9 {7.13} | 22.0 {2.25} | 54.1 {5.53} | 61.0 {6.24} | 7.7 | 6.5 | 5.4 | ||||||
| 18 | 35 to 200 | A | 29.9 {3.05} | 62.1 {6.33} | 65.2 {6.65} | 26.2 {2.67} | 54.3 {5.54} | 57.1 {5.82} | 1.4 | 1.8 | 2.0 | 5.9 | 5.0 | 4.1 | |
| B | 38.9 {3.97} | 80.7 {8.23} | 84.6 {8.63} | 34.0 {3.47} | 70.6 {7.2} | 74.0 {7.55} | 7.7 | 6.5 | 5.4 | ||||||
| 20 | 40 to 200 | A | 42.7 {4.35} | 76.9 {7.84} | 99.0 {10.1} | 37.4 {3.81} | 67.3 {6.86} | 86.6 {8.83} | 1.6 | 2.0 | 2.3 | 6.7 | 5.5 | 4.8 | |
| B | 55.2 {5.63} | 100 {10.2} | 128 {13.1} | 48.3 {4.93} | 87.2 {8.89} | 113 {11.5} | 8.7 | 7.2 | 6.3 | ||||||
| 23 | 45 to 200 | A | 51.9 {5.29} | 103.0 {10.50} | 121.0 {12.34} | 45.4 {4.63} | 90.2 {9.20} | 106.0 {10.81} | 1.8 | 2.3 | 2.6 | 7.8 | 6.4 | 5.5 | |
| B | 67.4 {6.87} | 133.0 {13.56} | 156.0 {15.91} | 58.9 {6.01} | 113.0 {11.52} | 137.0 {13.97} | 10.1 | 8.1 | 7.1 | ||||||
| 25 | 50 to 250 | A | 64.5 {6.58} | 153.5 {15.64} | 178.6 {18.20} | 56.3 {5.75} | 133.9 {13.68} | 155.9 {15.93} | 2.0 | 2.6 | 2.9 | 7.8 | 7.1 | 6.3 | |
| B | 82.4 {8.39} | 172.0 {17.53} | 214.3 {21.84} | 71.9 {7.34} | 150.1 {15.34} | 187.0 {19.11} | 10.2 | 8.0 | 7.9 | ||||||
| 27 | 70 to 250 | A | 86.0 {8.77} | 195.0 {19.87} | 220.3 {22.45} | 75.0 {7.67} | 170.2 {17.39} | 192.3 {19.64} | 2.3 | 2.9 | 3.2 | 7.5 | 7.4 | 6.7 | |
| B | 110.9 {11.30} | 214.2 {21.83} | 274.0 {27.92} | 96.8 {9.89} | 187.0 {19.10} | 239.1 {24.43} | 9.6 | 8.1 | 8.6 | ||||||
[!] Usage Count: 1 million times
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| FUF5-[15-65/1]-[A,B] |
| FUF6-[15-80/1]-[A,B] |
| FUF7-[15-90/1]-[A,B] |
| FUF8-[20-100/1]-[A,B] |
| FUF9-[19-110/1]-[A,B] |
| FUF10-[20-120/1]-[A,B] |
| FUF11-[21-130/1]-[A,B] |
| FUF12-[25-140/1]-[A,B] |
| FUF13-[24-150/1]-[A,B] |
| FUF14-[30-160/1]-[A,B] |
| FUF15-[27-170/1]-[A,B] |
| FUF16-[30-180/1]-[A,B] |
| FUF17-[31-190/1]-[A,B] |
| FUF18-[35-200/1]-[A,B] |
| FUF20-[40-200/1]-[A,B] |
| FUF23-[45-200/1]-[A,B] |
| FUF25-[50-250/1]-[A,B] |
| FUF27-[70-250/1]-[A,B] |
| FUR5-[15-65/1]-[A,B] |
| FUR6-[15-80/1]-[A,B] |
| FUR7-[15-90/1]-[A,B] |
| FUR8-[20-100/1]-[A,B] |
| FUR9-[19-110/1]-[A,B] |
| FUR10-[20-120/1]-[A,B] |
| FUR11-[21-130/1]-[A,B] |
| FUR12-[25-140/1]-[A,B] |
| FUR13-[24-150/1]-[A,B] |
| FUR14-[30-160/1]-[A,B] |
| FUR15-[27-170/1]-[A,B] |
| FUR16-[30-180/1]-[A,B] |
| FUR17-[31-190/1]-[A,B] |
| FUR18-[35-200/1]-[A,B] |
| FUR20-[40-200/1]-[A,B] |
| FUR23-[45-200/1]-[A,B] |
| FUR25-[50-250/1]-[A,B] |
| FUR27-[70-250/1]-[A,B] |
| FUT5-[15-65/1]-[A,B] |
| FUT6-[15-80/1]-[A,B] |
| FUT7-[15-90/1]-[A,B] |
| FUT8-[20-100/1]-[A,B] |
| FUT9-[19-110/1]-[A,B] |
| FUT10-[20-120/1]-[A,B] |
| FUT11-[21-130/1]-[A,B] |
| FUT12-[25-140/1]-[A,B] |
| FUT13-[24-150/1]-[A,B] |
| FUT14-[30-160/1]-[A,B] |
| FUT15-[27-170/1]-[A,B] |
| FUT16-[30-180/1]-[A,B] |
| FUT17-[31-190/1]-[A,B] |
| FUT18-[35-200/1]-[A,B] |
| FUT20-[40-200/1]-[A,B] |
| FUT23-[45-200/1]-[A,B] |
| FUT25-[50-250/1]-[A,B] |
| FUT27-[70-250/1]-[A,B] |
| FWF5-[15-65/1]-[A,B] |
| FWF6-[15-80/1]-[A,B] |
| FWF7-[15-90/1]-[A,B] |
| FWF8-[20-100/1]-[A,B] |
| FWF9-[19-110/1]-[A,B] |
| FWF10-[20-120/1]-[A,B] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Free Length L (mm) | Outer Dia. D (or D1) (Ø) | Material | Wire Dia. (Ø) | End Face | Load Type |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 65 | 5 | SUS304-WPB | 0.5 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 80 | 6 | SUS304-WPB | 0.6 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 90 | 7 | SUS304-WPB | 0.7 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 100 | 8 | SUS304-WPB | 0.8 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 19 ～ 110 | 9 | SUS304-WPB | 0.9 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 120 | 10 | SUS304-WPB | 1 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 21 ～ 130 | 11 | SUS304-WPB | 1 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 25 ～ 140 | 12 | SUS304-WPB | 1.2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 24 ～ 150 | 13 | SUS304-WPB | 1.2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 30 ～ 160 | 14 | SUS304-WPB | 1.4 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 27 ～ 170 | 15 | SUS304-WPB | 1.4 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 30 ～ 180 | 16 | SUS304-WPB | 1.6 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 31 ～ 190 | 17 | SUS304-WPB | 1.6 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 35 ～ 200 | 18 | SUS304-WPB | 1.8 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 40 ～ 200 | 20 | SUS304-WPB | 2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 45 ～ 200 | 23 | SUS304-WPB | 2.3 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 50 ～ 250 | 25 | SUS304-WPB | 2.6 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 70 ～ 250 | 27 | SUS304-WPB | 2.9 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 65 | 5 | SUS304-WPB | 0.4 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 80 | 6 | SUS304-WPB | 0.45 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 90 | 7 | SUS304-WPB | 0.5 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 100 | 8 | SUS304-WPB | 0.6 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 19 ～ 110 | 9 | SUS304-WPB | 0.7 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 120 | 10 | SUS304-WPB | 0.8 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 21 ～ 130 | 11 | SUS304-WPB | 0.8 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 25 ～ 140 | 12 | SUS304-WPB | 0.9 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 24 ～ 150 | 13 | SUS304-WPB | 0.9 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 30 ～ 160 | 14 | SUS304-WPB | 1 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 27 ～ 170 | 15 | SUS304-WPB | 1 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 30 ～ 180 | 16 | SUS304-WPB | 1.2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 31 ～ 190 | 17 | SUS304-WPB | 1.2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 35 ～ 200 | 18 | SUS304-WPB | 1.4 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 40 ～ 200 | 20 | SUS304-WPB | 1.6 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 45 ～ 200 | 23 | SUS304-WPB | 1.8 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 50 ～ 250 | 25 | SUS304-WPB | 2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 70 ～ 250 | 27 | SUS304-WPB | 2.3 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 65 | 5 | SUS304-WPB | 0.6 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 80 | 6 | SUS304-WPB | 0.7 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 90 | 7 | SUS304-WPB | 0.8 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 100 | 8 | SUS304-WPB | 0.9 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 19 ～ 110 | 9 | SUS304-WPB | 1 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 120 | 10 | SUS304-WPB | 1.2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 21 ～ 130 | 11 | SUS304-WPB | 1.2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 25 ～ 140 | 12 | SUS304-WPB | 1.4 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 24 ～ 150 | 13 | SUS304-WPB | 1.4 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 30 ～ 160 | 14 | SUS304-WPB | 1.6 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 27 ～ 170 | 15 | SUS304-WPB | 1.6 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 30 ～ 180 | 16 | SUS304-WPB | 1.8 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 31 ～ 190 | 17 | SUS304-WPB | 1.8 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 35 ～ 200 | 18 | SUS304-WPB | 2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 40 ～ 200 | 20 | SUS304-WPB | 2.3 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 45 ～ 200 | 23 | SUS304-WPB | 2.6 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 50 ～ 250 | 25 | SUS304-WPB | 2.9 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 70 ～ 250 | 27 | SUS304-WPB | 3.2 | With Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 65 | 5 | SWP-A | 0.5 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 80 | 6 | SWP-A | 0.6 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 15 ～ 90 | 7 | SWP-A | 0.7 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 100 | 8 | SWP-A | 0.8 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 19 ～ 110 | 9 | SWP-A | 0.9 | Without Grinding | A / B | ||
- | 1 Piece(s) | 6 Day(s) or more | 10 | 20 ～ 120 | 10 | SWP-A | 1 | With Grinding | A / B |
Loading...
Basic Information
| Type | Round Wire | Characteristics/Applications | Not applicable | Environmentally friendly | RoHS Compliant (10 Substances) |
|---|
Specification/Dimensions
-
Free Length L(mm)
-
Outer Dia. D (or D1)(Ø)
-
Material
- SUS304-WPB
- SWP-A
-
Wire Dia.(Ø)
-
End Face
- With Grinding
- Without Grinding
-
Load Type
- A
- B
-
type
- FUF
- FUR
- FUT
- FWF
- FWR
- FWT
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 6 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Compression Spring (1m) EA952S-203
- (127size) Compression Spring Set (Stainless Steel) EA952SF
- Compression Spring (Stainless Steel) EA952SF-172
- Compression Spring (Stainless Steel) EA952SF-35
- Compression Spring (Stainless Steel) EA952SF-72
- Compression Spring (Stainless Steel) EA952SF-97
- Compression Spring (Stainless Steel) EA952VU-52
- [Stainless Steel] Compression Spring EA952VV-77
Complementary Products
-
Posts for Tension Springs, Notched Type
MISUMI Standard Price : MYR 12.39- Days to Ship : 1 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
Round Wire Coil Springs/Deflection 15%-25%/O.D. ReferencedMISUMI
Standard Price : MYR 13.60-
Days to Ship : 1 Day(s) or more
-
Ultra Spring Compression Coil SpringACCURATE
Standard Price : MYR 3.48-
Days to Ship : 1 Day(s) or more
-
Round Coil Springs-Fmax. (Allowable Deflection) = Lx60%-75%/O.D. ReferencedMISUMI
Standard Price : MYR 3.86-
Days to Ship : 1 Day(s) or more
-
Round Coil Springs-Fmax. (Allowable Deflection) = Lx40%-45%/O.D. ReferencedMISUMI
Standard Price : MYR 3.86-
Days to Ship : 1 Day(s) or more
-
Round Wire Coil Springs/Deflection 45%/I.D. ReferencedMISUMI
Standard Price : MYR 10.20-
Days to Ship : 1 Day(s) or more
-
Round Wire Coil Springs/Deflection 45%/O.D. ReferencedMISUMI
Standard Price : MYR 5.67-
Days to Ship : 1 Day(s) or more
-
Round Wire Coil Springs -WR(60% Deflection)-MISUMI
Standard Price : MYR 3.86-
Days to Ship : 1 Day(s) or more
-
Compression Coil Spring, SWP-A/SUS304WP-BSHOWA SPRING
Standard Price : MYR 22.16-
Days to Ship : 5 Day(s) or more
-
Round Wire Coil Springs/Deflection 40%/O.D. ReferencedMISUMI
Standard Price : MYR 5.67-
Days to Ship : 1 Day(s) or more
-
Tension Springs/Medium Heavy Load and Heavy LoadMISUMI
Standard Price : MYR 6.80-
Days to Ship : 1 Day(s) or more
-
-
Round Coil Springs-Fmax. (Allowable Deflection) = Lx35%-40%/O.D. ReferencedMISUMI
Standard Price : MYR 4.18-
Days to Ship : 1 Day(s) or more
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy