(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Strut Clamps - Unequal Dia., Perpendicular Configuration / Reversed
- Volume Discount
Strut clamp that is used by crossing reducing struts at right angles. [Material]·Aluminum alloy, general structural steel, SUS304
Part Number
Configured Part Number is shown.
Dimensional Drawing
Unequal Dia., Perpendicular Configuration
Unequal Dia.,
Perpendicular
Configuration
Reversed
D=8 to 12
D=15 to 50
D=8 to 12
D=15 to 50
[!] Unless otherwise specified, the dimension tolerance conforms to JIS B 0405 Class m. However, B and C dimensions, slit width W dimension, and 2 mm tolerance are excluded.
Product Specifications
and SCB screws are included with the other products.
| Type | [M] Material | [S] Surface Treatment | [A] Accessory | |
| Unequal Dia., Perpendicular Configuration | Unequal Dia., Perpendicular Configuration, Reversed | |||
| KLSTN | KLSTK | Steel for General Structure Structural Steel | Black Oxide | Hex Socket Head Cap Screw |
| MLSTN | MLSTK | Electroless Nickel Plating | Hex Socket Head Cap Screw (Stainless Steel) | |
| ALKLN | ALKLK | Aluminum Alloy | Black Anodize | Hex Socket Head Cap Screw |
| HLKLN | HLKLK | Clear Anodize | Hex Socket Head Cap Screw (Stainless Steel) | |
| SLKLN | SLKLK | SUS304 | — | |
■Included Screw
| D | Included Screw |
| 8 | M4-8, M4-12, 1 pc. each |
| 10 | M5-12, M5-10, 1 pc. each |
| 12 | M5-15, 2 pcs. |
| 15 | M5-20, M5-15, 2 pcs. each |
| 20 | M6-25, M6-20, 2 pcs. each |
| 25 | M6-30, M6-25, 2 pcs. each |
| 30 | M8-35, M8-30, 2 pcs. each |
| 35 | M8-40, M8-35, 2 pcs. each |
| 40 | M8-45/M8-40, 2 pcs. each |
| 50 | M10-55/M10-45, 2 pcs. each |
Tighten shafts and strut clamps by standard tightening torque [N • m],
and conduct a maximum load test to observe the moment that the shaft and strut clamp start to move.
| Round | Square | ||
| Max. Load (kN) | Max. Load (kN) | ||
 |  | ||
| S45C equivalent Shaft Bore φ20 | Bolt Type | M5-20 (Single Clamp) | M6-25 (Single Clamp) |
| Vertical Load | 12.63 | 13.12 | |
| Rotation Load | 0.96 | 0.97 | |
| Aluminum alloy Shaft Bore φ10 | Bolt Type | M4-10 (Single Clamp) | M5-15 (Single Clamp) |
| Vertical Load | 10.59 | 8.26 | |
| Rotation Load | 0.72 | 0.58 | |
Specification Table
| Part Number | — | D1 |
| KLSTN20 | — | 15 |
| Part Number | D1H7 | A | B | C | E | F | G | H | K | S1 | S2 | M (Coarse) | d | W | ||||
| Type | DH7 | |||||||||||||||||
| Unequal Dia., Perpendicular Configuration KLSTN MLSTN ALKLN HLKLN SLKLN | Unequal Dia., Perpendicular Configuration, Reversed KLSTK MLSTK ALKLK HLKLK SLKLK | 8 | +0.015 0 | 6 | +0.012 0 | 37 | 12 | 9 | 13 | 12 | 12 | 8 | 7 | — | — | M4 | 4.5 | 2 |
| 10 | 8 | +0.015 0 | 43 | 16 | 12 | 15 | 14 | 14 | 9 | 8 | — | — | M5 | 5.5 | ||||
| 12 | +0.018 0 | 10 | 47 | 16 | 16 | 16 | 15 | 10 | 9 | — | — | |||||||
| 15 | 51 | 22 | 18 | 18 | 18 | 12 | 11 | 9 | ||||||||||
| 20 | +0.021 0 | 15 | +0.018 0 | 65 | 28 | 22 | 22 | 23 | 20 | 15 | 13 | 14 | 11 | M6 | 6.6 | |||
| 16 | ||||||||||||||||||
| 25 | 15 | 73 | 32 | 25 | 25 | 28 | 18 | 13 | 16 | 14 | ||||||||
| 30 | 20 | +0.021 0 | 85 | 40 | 30 | 29 | 32 | 24 | 21 | 16 | 20 | 15 | M8 | 9 | ||||
| 35 | +0.025 0 | 25 | 98 | 45 | 35 | 32 | 39 | 27 | 24 | 19 | 24 | 20 | ||||||
| KLSTN | KLSTK | 40 | +0.025 0 | 30 | +0.021 0 | 106 | 50 | 40 | 34 | 43 | 29 | 26 | 21 | 25 | 20 | M8 | 9 | 3 |
| 50 | 35 | +0.025 0 | 130 | 65 | 50 | 43 | 52 | 35 | 33 | 25 | 32 | 28 | M10 | 11 | ||||
| [!] D dimensions for SLKLN and SLKLK are available up to 30. [!] D dimension 8 is not available for ALKLN, ALKLK, HLKLN, HLKLK, SLKLN, and SLKLK. [!] The tolerance and perpendicularity of DH7 and D1H7 are the values measured before slit machining. [!] D1 Dimension 16 is not available for HLKLN and Reversed Type. [!] Recommended tolerance of mating shafts is g6 and f8. Tightening with a long wrench is recommended. | ||||||||||||||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
| Part Number |
|---|
| ALKLK10-8 |
| ALKLK12-10 |
| ALKLK15-10 |
| ALKLK20-15 |
| ALKLK25-15 |
| ALKLK30-20 |
| ALKLK35-25 |
| ALKLN10-8 |
| ALKLN12-10 |
| ALKLN15-10 |
| ALKLN20-[15,16] |
| ALKLN25-15 |
| ALKLN30-20 |
| ALKLN35-25 |
| HLKLN10-8 |
| HLKLN12-10 |
| HLKLN15-10 |
| HLKLN20-[15,16] |
| HLKLN25-15 |
| HLKLN30-20 |
| HLKLN35 |
| KLSTK8-6 |
| KLSTK10-8 |
| KLSTK12-10 |
| KLSTK15-10 |
| KLSTK20-15 |
| KLSTK20-16 |
| KLSTK25-15 |
| KLSTK30-20 |
| KLSTK35-25 |
| KLSTK40-30 |
| KLSTK50-35 |
| KLSTN8-6 |
| KLSTN10-8 |
| KLSTN12-10 |
| KLSTN15-10 |
| KLSTN20-[15,16] |
| KLSTN25-15 |
| KLSTN30-20 |
| KLSTN35-25 |
| KLSTN40-30 |
| KLSTN50-35 |
| MLSTK8-6 |
| MLSTK10-8 |
| MLSTK12-10 |
| MLSTK15-10 |
| MLSTK20-15 |
| MLSTK20-16 |
| MLSTK25-15 |
| MLSTK30-20 |
| MLSTK35-25 |
| MLSTN8-6 |
| MLSTN10-8 |
| MLSTN12-10 |
| MLSTN15-10 |
| MLSTN20-[15,16] |
| MLSTN25-15 |
| MLSTN30-20 |
| MLSTN35-25 |
| SLKLK10-8 |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Post Dia. (mm) | Material | Surface Treatment | Post Dia. 2 (mm) | Characteristics/Applications | Material Details | Tightening Direction Type | Post Diameter 2 (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
MYR 83.28 | 1 Piece(s) | Available | 12 Day(s) | 10 | 10 | [Aluminum] Aluminum Alloy | Black Anodizing | 8 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Anodize | |
MYR 98.18 | 1 Piece(s) | Available | 12 Day(s) | 10 | 12 | [Aluminum] Aluminum Alloy | Black Anodizing | 10 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Anodize | |
MYR 124.86 | 1 Piece(s) | Available | 12 Day(s) | 10 | 15 | [Aluminum] Aluminum Alloy | Black Anodizing | 10 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Anodize | |
MYR 118.73 | 1 Piece(s) | Available | 12 Day(s) | 10 | 20 | [Aluminum] Aluminum Alloy | Black Anodizing | 15 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Anodize | |
MYR 170.15 | 1 Piece(s) | Available | 12 Day(s) | 10 | 25 | [Aluminum] Aluminum Alloy | Black Anodizing | 15 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Anodize | |
MYR 212.29 | 1 Piece(s) | Available | 12 Day(s) | 10 | 30 | [Aluminum] Aluminum Alloy | Black Anodizing | 20 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Anodize | |
MYR 261.12 | 1 Piece(s) | Available | 12 Day(s) | 10 | 35 | [Aluminum] Aluminum Alloy | Black Anodizing | 25 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Anodize | |
- | 1 Piece(s) | 12 Day(s) | 10 | 10 | [Aluminum] Aluminum Alloy | Black Anodizing | 8 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration | Black Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 12 | [Aluminum] Aluminum Alloy | Black Anodizing | 10 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration | Black Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 15 | [Aluminum] Aluminum Alloy | Black Anodizing | 10 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration | Black Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 20 | [Aluminum] Aluminum Alloy | Black Anodizing | 15 ～ 16 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration | Black Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 25 | [Aluminum] Aluminum Alloy | Black Anodizing | 15 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration | Black Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 30 | [Aluminum] Aluminum Alloy | Black Anodizing | 20 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration | Black Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 35 | [Aluminum] Aluminum Alloy | Black Anodizing | 25 | Anti-reflective | - | Unequal Diameter, Perpendicular Configuration | Black Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 10 | [Aluminum] Aluminum Alloy | Clear Anodizing | 8 | Non-magnetic | - | Unequal Diameter, Perpendicular Configuration | Clear Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 12 | [Aluminum] Aluminum Alloy | Clear Anodizing | 10 | Non-magnetic | - | Unequal Diameter, Perpendicular Configuration | Clear Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 15 | [Aluminum] Aluminum Alloy | Clear Anodizing | 10 | Non-magnetic | - | Unequal Diameter, Perpendicular Configuration | Clear Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 20 | [Aluminum] Aluminum Alloy | Clear Anodizing | 15 ～ 16 | Non-magnetic | - | Unequal Diameter, Perpendicular Configuration | Clear Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 25 | [Aluminum] Aluminum Alloy | Clear Anodizing | 15 | Non-magnetic | - | Unequal Diameter, Perpendicular Configuration | Clear Anodize | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 30 | [Aluminum] Aluminum Alloy | Clear Anodizing | 20 | Non-magnetic | - | Unequal Diameter, Perpendicular Configuration | Clear Anodize | ||
MYR 274.70 | 1 Piece(s) | Available | 12 Day(s) | 10 | 35 | [Aluminum] Aluminum Alloy | Clear Anodizing | - | Non-magnetic | - | Unequal Diameter, Perpendicular Configuration | Clear Anodize | |
MYR 82.75 | 1 Piece(s) | Available | 12 Day(s) | 10 | 8 | [Steel] Steel for General Structure | Black Oxide | 6 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 80.85 | 1 Piece(s) | Available | 12 Day(s) | 10 | 10 | [Steel] Steel for General Structure | Black Oxide | 8 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 88.41 | 1 Piece(s) | Available | 12 Day(s) | 10 | 12 | [Steel] Steel for General Structure | Black Oxide | 10 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 105.37 | 1 Piece(s) | Available | 12 Day(s) | 10 | 15 | [Steel] Steel for General Structure | Black Oxide | 10 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 126.46 | 1 Piece(s) | Available | 12 Day(s) | 10 | 20 | [Steel] Steel for General Structure | Black Oxide | 15 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 126.46 | 1 Piece(s) | Available | 12 Day(s) | 10 | 20 | [Steel] Steel for General Structure | Black Oxide | 16 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 153.19 | 1 Piece(s) | Available | 12 Day(s) | 10 | 25 | [Steel] Steel for General Structure | Black Oxide | 15 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 191.73 | 1 Piece(s) | Available | 12 Day(s) | 10 | 30 | [Steel] Steel for General Structure | Black Oxide | 20 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 235.94 | 1 Piece(s) | Available | 12 Day(s) | 10 | 35 | [Steel] Steel for General Structure | Black Oxide | 25 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 302.24 | 1 Piece(s) | Available | 12 Day(s) | 10 | 40 | [Steel] Steel for General Structure | Black Oxide | 30 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
MYR 387.06 | 1 Piece(s) | Available | 12 Day(s) | 10 | 50 | [Steel] Steel for General Structure | Black Oxide | 35 | Not applicable | - | Unequal Diameter, Perpendicular Configuration, Reversed | Black Oxide | |
- | 1 Piece(s) | 12 Day(s) | 10 | 8 | [Steel] Steel for General Structure | Black Oxide | 6 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 13 Day(s) | 10 | 10 | [Steel] Steel for General Structure | Black Oxide | 8 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 12 | [Steel] Steel for General Structure | Black Oxide | 10 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 15 | [Steel] Steel for General Structure | Black Oxide | 10 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 20 | [Steel] Steel for General Structure | Black Oxide | 15 ～ 16 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 25 | [Steel] Steel for General Structure | Black Oxide | 15 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 10 Day(s) | 10 | 30 | [Steel] Steel for General Structure | Black Oxide | 20 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 35 | [Steel] Steel for General Structure | Black Oxide | 25 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 40 | [Steel] Steel for General Structure | Black Oxide | 30 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 50 | [Steel] Steel for General Structure | Black Oxide | 35 | Not applicable | - | Unequal Diameter, Perpendicular Configuration | Black Oxide | ||
MYR 91.50 | 1 Piece(s) | Available | 12 Day(s) | 10 | 8 | [Steel] Steel for General Structure | Electroless Nickel Plating | 6 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 83.28 | 1 Piece(s) | Available | 12 Day(s) | 10 | 10 | [Steel] Steel for General Structure | Electroless Nickel Plating | 8 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 98.18 | 1 Piece(s) | Available | 12 Day(s) | 10 | 12 | [Steel] Steel for General Structure | Electroless Nickel Plating | 10 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 116.69 | 1 Piece(s) | Available | 12 Day(s) | 10 | 15 | [Steel] Steel for General Structure | Electroless Nickel Plating | 10 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 140.33 | 1 Piece(s) | Available | 12 Day(s) | 10 | 20 | [Steel] Steel for General Structure | Electroless Nickel Plating | 15 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 154.36 | 1 Piece(s) | Available | 12 Day(s) | 10 | 20 | [Steel] Steel for General Structure | Electroless Nickel Plating | 16 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 170.15 | 1 Piece(s) | Available | 12 Day(s) | 10 | 25 | [Steel] Steel for General Structure | Electroless Nickel Plating | 15 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 212.29 | 1 Piece(s) | Available | 12 Day(s) | 10 | 30 | [Steel] Steel for General Structure | Electroless Nickel Plating | 20 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
MYR 261.12 | 1 Piece(s) | Available | 12 Day(s) | 10 | 35 | [Steel] Steel for General Structure | Electroless Nickel Plating | 25 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration, Reversed | Electroless Nickel Plating | |
- | 1 Piece(s) | 12 Day(s) | 10 | 8 | [Steel] Steel for General Structure | Electroless Nickel Plating | 6 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 10 | [Steel] Steel for General Structure | Electroless Nickel Plating | 8 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 12 | [Steel] Steel for General Structure | Electroless Nickel Plating | 10 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 15 | [Steel] Steel for General Structure | Electroless Nickel Plating | 10 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 20 | [Steel] Steel for General Structure | Electroless Nickel Plating | 15 ～ 16 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 25 | [Steel] Steel for General Structure | Electroless Nickel Plating | 15 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 30 | [Steel] Steel for General Structure | Electroless Nickel Plating | 20 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
- | 1 Piece(s) | 12 Day(s) | 10 | 35 | [Steel] Steel for General Structure | Electroless Nickel Plating | 25 | Corrosion resistance/chemical resistance | - | Unequal Diameter, Perpendicular Configuration | Electroless Nickel Plating | ||
MYR 104.35 | 1 Piece(s) | Available | 12 Day(s) | 10 | 10 | [Stainless Steel] SUS304 | Not Provided | 8 | Corrosion resistance/chemical resistance | SUS304 | Unequal Diameter, Perpendicular Configuration, Reversed | N/A |
Loading...
App. Example
Basic Information
| Combined-Post Dia. | Unequal Dia. | Type | Perpendicular | Post Shape | Round Flange Type |
|---|---|---|---|---|---|
| Environmentally friendly | RoHS Compliant (10 Substances) |
Specification/Dimensions
-
Post Dia.(mm)
-
Material
- Steel
- Stainless Steel
- Aluminum
- Steel
-
Surface Treatment
- Electroless Nickel Plating
- Black Oxide
- Clear Anodizing
- Black Anodizing
- Not Provided
-
Post Dia. 2(mm)
-
Characteristics/Applications
-
Material Details
- SUS304
-
Tightening Direction Type
- Unequal Diameter, Perpendicular Configuration
- Unequal Diameter, Perpendicular Configuration, Reversed
-
Post Diameter 2(mm)
- Black Anodize
- Black Oxide
- Clear Anodize
- Electroless Nickel Plating
- N/A
-
type
- ALKLK
- ALKLN
- HLKLN
- KLSTK
- KLSTN
- MLSTK
- MLSTN
- SLKLK
- SLKLN
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 10 Day(s) or Less
- 12 Day(s) or Less
- 13 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Simple Strut Clamps Equal Dia, Hole Perpendicular
- Compact Strut Clamps Equal Dia, Hole Perpendicular
- Square Pipe Joint, Square Type
- Free Angle/Adjuster Mounting Bracket
- Round Pipe Joint Same-Diameter Hole Type 2-Split, 2 Parallel Shaft Holes
- Round Pipe Joint Maru-Pijon, Reducing Hole Type, 90° Cross Holes
- Round Pipe Joint Maru-Pijon,, Same Diameter Hole Type, 90° Cross Holes
- Round Pipe Joint Same Diameter Hole Type Vertical/Horizontal Hole T Shape (Frame)
Complementary Products
-
Posts for Stands - Square Tubes Length Configurable with Scale
MISUMI Days to Ship : 6 Day(s) or more
Customers Who Viewed This Item Also Viewed
-
Strut Clamps - Equal Dia., Perpendicular Configuration / Equal Dia., Perpendicular Configuration, ReversedMISUMI
Standard Price : MYR 46.07-
Days to Ship : 1 Day(s) or more
-
Super Compact Strut Clamps / Resin Compact Strut Clamps - Equal / Unequal Dia.MISUMI
Standard Price : MYR 36.26-
Days to Ship : 2 Day(s) or more
-
Strut Clamps - Equal Dia., Rotation / Unequal Dia., RotationMISUMI
Standard Price : MYR 96.99-
Days to Ship : 2 Day(s) or more
-
-
Brackets for Device Stands - Side MountingMISUMI
Standard Price : MYR 200.00-
Days to Ship : 2 Day(s) or more
-
-
Brackets for Stands - Casting TypeMISUMI
Standard Price : MYR 83.65-
Days to Ship : 2 Day(s) or more
-
Strut Clamps - Unequal Dia., Perpendicular Configuration, Hole Pitch SelectableMISUMI
Days to Ship : 12 Day(s)
-
Round Strut Clamp - Equal Dia., Perpendicular ConfigurationMISUMI
Standard Price : MYR 22.30-
Days to Ship : 1 Day(s) or more
-
Strut Clamps - Equal Dia., Perpendicular Configuration, Hole Pitch SelectableMISUMI
Days to Ship : 12 Day(s)
-
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy