(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Bushings for Locating Pins - Shouldered, Retaining (Part Numbers)
[Features]Bushing that enables removal prevention by using a set screw. [Alteration Support]Change in the depth of the set screw thread section and change in the inner diameter R.
(i)Caution
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Part Number
Configured Part Number is shown.
[ ! ]
| D | p6 | m6 | h6 |
| 8 | +0.024 +0.015 | +0.015 +0.006 | 0 |
| 10 | |||
| 12 | +0.029 +0.018 | +0.018 +0.007 | 0 |
| 15 | |||
| 18 | |||
| 20 | +0.035 +0.022 | +0.021 +0.008 | 0 |
| 22 | |||
| 25 | |||
| 26 | |||
| 30 | |||
| 35 | +0.042 +0.026 | +0.025 +0.009 | 0 |
* The insertion guide is not available for D dimension tolerance h6 at D shaft tip.
[ ! ] For hole machining, please note that inner diameter shrinkage of p6 Type is larger than that of m6 Type.
| [M] Material | [S] Surface Treatment | [H] Hardness | Type | ||
| p6 | m6 | h6 | |||
| SKS3 Equivalent | — | 56 ~ 60HRC | JBHFPG | JBHFG | JBHG |
| Electroless Nickel Plating | 56 ~ 60HRC | JBHFMPG | JBHFMG | JBHMG | |
| SUS440C or 13Cr stainless | — | 50 ~ 55HRC | JBHFCPG | JBHFCG | — |
Specification Table
| Part Number | — | P | — | L |
| JBHG20 | — | P13.5 | — | L20.5 |
| Part Number | P 0.01 mm Increments | L 0.1 mm Increments | Thickness (N) | R | H | T | |
| Type | D | ||||||
| (p6) JBHFPG JBHFMPG JBHFCPG (m6) JBHFG JBHFMG JBHFCG (h6) JBHG JBHMG | 8 | 4.00 to 4.50 | 8.0 to 10.0 | 1.75 to 2.50 | 1.0 | 12 | 3 |
| 10 | 4.00 to 6.50 | 8.0 to 15.0 | 1.75 to 3.00 | 14 | |||
| 12 | 6.00 to 8.50 | 2.0 | 16 | 4 | |||
| 15 | 8.00 to 10.50 | 10.0 to 35.0 | 2.25 to 3.50 | 19 | |||
| 18 | 10.00 to 12.50 | 2.75 to 4.00 | 22 | ||||
| 20 | 12.00 to 13.50 | 3.25 to 4.00 | 26 | 5 | |||
| 22 | 12.00 to 13.50 | 4.25 to 5.00 | |||||
| 25 | 13.00 to 15.50 | 4.75 to 6.00 | 30 | ||||
| 26 | 15.00 to 16.50 | 4.75 to 5.50 | |||||
| 30 | 16.00 to 20.50 | 12.0 to 50.0 | 4.75 to 7.00 | 3.0 | 35 | 6 | |
| 35 | 20.00 to 25.00 | 5.00 to 7.50 | 40 | ||||
| [ ! ]L+T ≤ P × 3.0 | |||||||
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| JBHFCG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHFCG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHFCG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHFCG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHFCG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHFCG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFCG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFCG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHFCG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHFCG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHFCG35-P[20-25/0.01]-L[12-50/0.1] |
| JBHFCPG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHFCPG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHFCPG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHFCPG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHFCPG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHFCPG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFCPG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFCPG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHFCPG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHFCPG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHFCPG35-P[20-25/0.01]-L[12-50/0.1] |
| JBHFG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHFG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHFG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHFG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHFG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHFG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHFG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHFG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHFG35-P[20-25/0.01]-L[12-50/0.1] |
| JBHFMG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHFMG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHFMG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHFMG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHFMG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHFMG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFMG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFMG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHFMG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHFMG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHFMG35-P[20-25/0.01]-L[12-50/0.1] |
| JBHFMPG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHFMPG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHFMPG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHFMPG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHFMPG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHFMPG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFMPG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFMPG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHFMPG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHFMPG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHFMPG35-P[20-25/0.01]-L[12-50/0.1] |
| JBHFPG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHFPG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHFPG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHFPG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHFPG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHFPG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFPG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHFPG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHFPG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHFPG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHFPG35-P[20-25/0.01]-L[12-50/0.1] |
| JBHG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHG35-P[20-25/0.01]-L[12-50/0.1] |
| JBHMG8-P[4-4.5/0.01]-L[8-10/0.1] |
| JBHMG10-P[4-6.5/0.01]-L[8-15/0.1] |
| JBHMG12-P[6-8.5/0.01]-L[8-15/0.1] |
| JBHMG15-P[8-10.5/0.01]-L[10-35/0.1] |
| JBHMG18-P[10-12.5/0.01]-L[10-35/0.1] |
| JBHMG20-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHMG22-P[12-13.5/0.01]-L[10-35/0.1] |
| JBHMG25-P[13-15.5/0.01]-L[10-35/0.1] |
| JBHMG26-P[15-16.5/0.01]-L[10-35/0.1] |
| JBHMG30-P[16-20.5/0.01]-L[12-50/0.1] |
| JBHMG35-P[20-25/0.01]-L[12-50/0.1] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Inner Diameter (mm) | Outer Diameter (mm) | O.D. Tolerance | Material | Surface Treatment | Length L (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | m6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | p6 | [Stainless Steel] SUS440C or 13Cr stainless | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | m6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | m6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | m6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | m6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | m6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | m6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | m6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | m6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | m6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | m6 | [Steel] SKS3 Equivalent | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | m6 | [Steel] SKS3 Equivalent | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | m6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | p6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | p6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | p6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | p6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | p6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | p6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | p6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | p6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | p6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | p6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | p6 | [Steel] SKS3 Equivalent | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | p6 | [Steel] SKS3 Equivalent | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | h6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | h6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | h6 | [Steel] SKS3 Equivalent | Not Provided | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | h6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | h6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | h6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | h6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | h6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | h6 | [Steel] SKS3 Equivalent | Not Provided | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | h6 | [Steel] SKS3 Equivalent | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | h6 | [Steel] SKS3 Equivalent | Not Provided | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 4.5 | 8 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 10 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 4 ～ 6.5 | 10 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 6 ～ 8.5 | 12 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 8 ～ 15 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 8 ～ 10.5 | 15 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 10 ～ 12.5 | 18 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 20 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 12 ～ 13.5 | 22 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 13 ～ 15.5 | 25 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 15 ～ 16.5 | 26 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 10 ～ 35 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 16 ～ 20.5 | 30 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 12 ～ 50 | ||
- | 1 Piece(s) | 7 Day(s) | 10 | 20 ～ 25 | 35 | h6 | [Steel] SKS3 Equivalent | Electroless Nickel Plating | 12 ～ 50 |
Loading...
App. Example
Basic Information
| Basic Shape | Aluminum | I.D. Shape | Circular | Fixing Support | Retaining Type |
|---|---|---|---|---|---|
| Type | Bushing |
Specification/Dimensions
-
Inner Diameter(mm)
-
Outer Diameter(mm)
-
O.D. Tolerance
-
Material
- Steel
- Stainless Steel
- Steel
-
Surface Treatment
- Not Provided
- Electroless Nickel Plating
-
Length L(mm)
-
type
- JBHFCG
- JBHFCPG
- JBHFG
- JBHFMG
- JBHFMPG
- JBHFPG
- JBHG
- JBHMG
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 7 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Bushings for Locating Pins - Notched, Retaining
- Bushings for Locating Pins - Straight, Standard / Thin Wall
- Bushings for Locating Pins - Configurable, Straight, Standard / Thin Wall
- Bushings For Locating Pins - Straight, Adhesive Fixation for Easy Positioning
- Bushings For Locating Pins - Shouldered, Adhesive Fixation for Easy Positioning
- Bushings for Locating Pins Shouldered, Retaining
- Bushing PJB for Positioning Pin
- Flex Locator, Center Fixed (Taper Bushing)
Complementary Products
-
![[High Precision] X-Axis Cross Roller - Micrometer Head](//content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
[High Precision] X-Axis Cross Roller - Micrometer Head
MISUMI Standard Price : MYR 804.71- Days to Ship : 6 Day(s) or more
-
Sheet Metal Bracket For 5 Series (Slot Width 6mm) Aluminum Frames - Bent-Shaped
MISUMI Standard Price : MYR 5.78- Days to Ship : 1 Day(s) or more
![[High Precision] X-Axis Cross Roller - Micrometer Head](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/cn/product/series/110300196460/110300196460_20201112120724.jpg?$product_recommend_a$)
Customers Who Viewed This Item Also Viewed
-
-
-
-
-
-
-
Bushings for Locating Pins - Shouldered, Standard / Thin WallMISUMI
Standard Price : MYR 20.01-
Days to Ship : 1 Day(s) or more
-
Bushings for Locating Pins - Configurable, Shouldered, Standard / Thin WallMISUMI
Days to Ship : 7 Day(s) or more
-
Tapered Pin Locating Block Sets - StandardMISUMI
Standard Price : MYR 289.85-
Days to Ship : 1 Day(s) or more
-
-
Bushings for Locating Pins - Ceramic Abrasion Data - Shouldered TypeMISUMI
Standard Price : MYR 19.26-
Days to Ship : 1 Day(s) or more
-
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy