(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
- [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
- [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.
Pivot Pins - End Shape Combination Selectable (Part Numbers)
Shaft End Shapes are selectable.
Part Number
Configured Part Number is shown.
Part Number
CAD Data download and 3D preview are not available because the part number has not yet been determined.
- *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
- Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...
| Part Number |
|---|
| GFCLSHDA-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5] |
| GFCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1] |
| GFCLSHDB-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| GFCLSHDC-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1] |
| GFCLSHDE-D[4-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHDF-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| GFCLSHDG-D[3-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| GFCLSHDH-D[6-20/1]-L[5-200/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1] |
| GFCLSHED-D[4-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5] |
| GFCLSHFD-D[6-20/1]-L[5-200/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| GFCLSHGD-D[3-20/1]-L[5-200/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| GFCLSHHD-D[6-20/1]-L[5-200/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLAA-D[3-20/1]-L[5-150/0.1] |
| PFCLAD-D[3-20/1]-L[5-150/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| PFCLBD-D[6-20/1]-L[5-150/0.1]-N[0-125/0.1]-G[0-10/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLBD-D[6-20/1]-L[5-150/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLCD-D[3-20/1]-L[5-150/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| PFCLDA-D[3-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[4-30/0.5] |
| PFCLDB-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1] |
| PFCLDB-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| PFCLDC-D[3-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1] |
| PFCLDE-D[4-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| PFCLDF-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| PFCLDG-D[3-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| PFCLDH-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1] |
| PFCLED-D[4-20/1]-L[5-150/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5] |
| PFCLFD-D[6-20/1]-L[5-150/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLGD-D[3-20/1]-L[5-150/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| PFCLHAA-D[3-20/1]-L[5-150/0.1] |
| PFCLHAD-D[3-20/1]-L[5-150/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| PFCLHBD-D[6-20/1]-L[5-150/0.1]-N[0-125/0.1]-G[0-10/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLHBD-D[6-20/1]-L[5-150/0.1]-N[0-125/0.1]-M[3,4,5,6,8,10]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLHCD-D[3-20/1]-L[5-150/0.1]-N[2-50/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| PFCLHD-D[6-20/1]-L[5-150/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLHDA-D[3-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[4-30/0.5] |
| PFCLHDB-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-GC[0-10/0.1] |
| PFCLHDB-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[0-125/0.1]-MC[3,4,5,6,8,10] |
| PFCLHDC-D[3-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[2-50/0.1] |
| PFCLHDE-D[4-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[5-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| PFCLHDF-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-MC[3,4,5,6,8,10,12,16] |
| PFCLHDG-D[3-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[4-30/0.5]-NC[0-125/0.1]-KC[2-30/0.1]-YC[0-10/0.1] |
| PFCLHDH-D[6-20/1]-L[5-150/0.1]-T[0.5-125/0.1]-H[7-30/0.5]-NC[2-125/0.1] |
| PFCLHED-D[4-20/1]-L[5-150/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[5-30/0.5] |
| PFCLHFD-D[6-20/1]-L[5-150/0.1]-M[3,4,5,6,8,10,12,16]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| PFCLHGD-D[3-20/1]-L[5-150/0.1]-N[0-125/0.1]-K[2-30/0.1]-Y[0-10/0.1]-TC[0.5-125/0.1]-HC[4-30/0.5] |
| PFCLHHD-D[6-20/1]-L[5-150/0.1]-N[2-125/0.1]-TC[0.5-125/0.1]-HC[7-30/0.5] |
| Part Number | Standard Unit Price | Minimum order quantity | Volume Discount | Days to Ship | RoHS | Shaft Dia. D (mm) | Mounting Method | Characteristics/Applications | Basic Shape | Material | Hardness | Surface Treatment | Material Details | Material Detail | Left End Shape | Right End Shape | G (mm) | GC (mm) | H (mm) | HC (mm) | K (mm) | KC (mm) | L (mm) | M (mm) | MC (mm) | N (mm) | NC (mm) | T (mm) | TC (mm) | Y (mm) | YC (mm) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Straight | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | A | - | - | 4 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | B | - | 0 ～ 10 | 7 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | B | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 10 | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | C | - | - | 4 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 50 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | E | - | - | 5 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Tapped | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | F | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | G | - | - | 4 ～ 30 | - | - | 2 ～ 30 | 5 ～ 200 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | D | H | - | - | 7 ～ 30 | - | - | - | 5 ～ 200 | - | - | - | 2 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | E | D | - | - | - | 5 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Tapped | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | F | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | G | D | - | - | - | 4 ～ 30 | 2 ～ 30 | - | 5 ～ 200 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance | Shouldered | Stainless Steel | Hardness Requirement | Hard Chrome Plating | SUS440C ot 13Cr Class Stainless Steel | SUS440C or 13Cr Stainless Steel | H | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 200 | - | - | 2 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Straight | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | A | A | - | - | - | - | - | - | 5 ～ 150 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Straight | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | A | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 150 | - | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | B | D | 0 ～ 10 | - | - | 7 ～ 30 | - | - | 5 ～ 150 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | B | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 150 | 3 ～ 10 | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | C | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 150 | - | - | 2 ～ 50 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Straight | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | A | - | - | 4 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | B | - | 0 ～ 10 | 7 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | B | - | - | 7 ～ 30 | - | - | - | 5 ～ 150 | - | 3 ～ 10 | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | C | - | - | 4 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | 2 ～ 50 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | E | - | - | 5 ～ 30 | - | - | - | 5 ～ 150 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Tapped | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | F | - | - | 7 ～ 30 | - | - | - | 5 ～ 150 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | G | - | - | 4 ～ 30 | - | - | 2 ～ 30 | 5 ～ 150 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | D | H | - | - | 7 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | 2 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | E | D | - | - | - | 5 ～ 30 | - | - | 5 ～ 150 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Tapped | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | F | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 150 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | G | D | - | - | - | 4 ～ 30 | 2 ～ 30 | - | 5 ～ 150 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Straight | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | A | A | - | - | - | - | - | - | 5 ～ 150 | - | - | - | - | - | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Straight | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | A | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 150 | - | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | B | D | 0 ～ 10 | - | - | 7 ～ 30 | - | - | 5 ～ 150 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | B | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 150 | 3 ～ 10 | - | 0 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | C | D | - | - | - | 4 ～ 30 | - | - | 5 ～ 150 | - | - | 2 ～ 50 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Not Spec-designed | Electroless Nickel Plating | S45C | S45C | H | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 150 | - | - | 2 ～ 125 | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Straight | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | A | - | - | 4 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | B | - | 0 ～ 10 | 7 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Cotter Pin | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | B | - | - | 7 ～ 30 | - | - | - | 5 ～ 150 | - | 3 ～ 10 | - | 0 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Retaining Ring | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | C | - | - | 4 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | 2 ～ 50 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | E | - | - | 5 ～ 30 | - | - | - | 5 ～ 150 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Tapped | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | F | - | - | 7 ～ 30 | - | - | - | 5 ～ 150 | - | 3 ～ 16 | - | - | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | G | - | - | 4 ～ 30 | - | - | 2 ～ 30 | 5 ～ 150 | - | - | - | 0 ～ 125 | 0.5 ～ 125 | - | - | 0 ～ 10 | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | D | H | - | - | 7 ～ 30 | - | - | - | 5 ～ 150 | - | - | - | 2 ～ 125 | 0.5 ～ 125 | - | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 4 ～ 20 | Nut (Threaded) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | E | D | - | - | - | 5 ～ 30 | - | - | 5 ～ 150 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Tapped | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | F | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 150 | 3 ～ 16 | - | - | - | - | 0.5 ～ 125 | - | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 3 ～ 20 | Set Screw (Set Screw Flat, D-Cut) / Keyway | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | G | D | - | - | - | 4 ～ 30 | 2 ～ 30 | - | 5 ～ 150 | - | - | 0 ～ 125 | - | - | 0.5 ～ 125 | 0 ～ 10 | - | ||
- | 1 Piece(s) | 9 Day(s) | 10 | 6 ～ 20 | Set Screw (V Groove) | Corrosion Resistant / Chemical Resistant | Shouldered | Steel | Hardness Requirement | Electroless Nickel Plating | S45C | S45C | H | D | - | - | - | 7 ～ 30 | - | - | 5 ～ 150 | - | - | 2 ～ 125 | - | - | 0.5 ～ 125 | - | - |
Loading...
Basic Information
| Environmentally friendly | RoHS Compliant (10 Substances) | Type | L Dimension Configurable |
|---|
Specification/Dimensions
-
Shaft Dia. D(mm)
-
Mounting Method
-
Straight -
Retaining Ring -
Cotter Pin -
Nut (Threaded) -
Tapped -
Set Screw (Set Screw Flat, D-Cut) -
Keyway -
Set Screw (V Groove)
-
-
Characteristics/Applications
-
Material
- Steel
- Stainless Steel
-
Hardness
- Not Spec-designed
- Hardness Requirement
-
Surface Treatment
- Not Provided
- Black Oxide
- Electroless Nickel Plating
- Hard Chrome Plating
-
Material Details
- S45C
- SUS304
- SUS440C ot 13Cr Class Stainless Steel
-
Material Detail
-
Left End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
Right End Shape
- A
- B
- C
- D
- E
- F
- G
- H
-
G(mm)
-
GC(mm)
-
H(mm)
-
HC(mm)
-
K(mm)
-
KC(mm)
-
L(mm)
-
M(mm)
-
MC(mm)
-
N(mm)
-
NC(mm)
-
T(mm)
-
TC(mm)
-
Y(mm)
-
YC(mm)
-
type
- FCLAA
- FCLAB
- FCLAC
- FCLAD
- FCLAE
- FCLAF
- FCLAG
- FCLAH
- FCLBA
- FCLBB
- FCLBC
- FCLBD
- FCLBE
- FCLBF
- FCLBG
- FCLBH
- FCLCA
- FCLCB
- FCLCC
- FCLCD
- FCLCE
- FCLCF
- FCLCG
- FCLCH
- FCLDA
- FCLDB
- FCLDC
- FCLDE
- FCLDF
- FCLDG
- FCLDH
- FCLEA
- FCLEB
- FCLEC
- FCLED
- FCLEE
- FCLEF
- FCLEG
- FCLEH
- FCLFA
- FCLFB
- FCLFC
- FCLFD
- FCLFE
- FCLFF
- FCLFG
- FCLFH
- FCLGA
- FCLGB
- FCLGC
- FCLGD
- FCLGE
- FCLGF
- FCLGG
- FCLGH
- FCLHA
- FCLHAA
- FCLHAB
- FCLHAC
- FCLHAD
- FCLHAE
- FCLHAF
- FCLHAG
- FCLHAH
- FCLHB
- FCLHBA
- FCLHBB
- FCLHBC
- FCLHBD
- FCLHBE
- FCLHBF
- FCLHBG
- FCLHBH
- FCLHC
- FCLHCA
- FCLHCB
- FCLHCC
- FCLHCD
- FCLHCE
- FCLHCF
- FCLHCG
- FCLHCH
- FCLHD
- FCLHDA
- FCLHDB
- FCLHDC
- FCLHDE
- FCLHDF
- FCLHDG
- FCLHDH
- FCLHE
- FCLHEA
- FCLHEB
- FCLHEC
- FCLHED
- FCLHEE
- FCLHEF
- FCLHEG
- FCLHEH
- FCLHF
- FCLHFA
- FCLHFB
- FCLHFC
- FCLHFD
- FCLHFE
- FCLHFF
- FCLHFG
- FCLHFH
- FCLHG
- FCLHGA
- FCLHGB
- FCLHGC
- FCLHGD
- FCLHGE
- FCLHGF
- FCLHGG
- FCLHGH
- FCLHH
- FCLHHA
- FCLHHB
- FCLHHC
- FCLHHD
- FCLHHE
- FCLHHF
- FCLHHG
- FCLHHH
- FCLSAA
- FCLSAB
- FCLSAC
- FCLSAD
- FCLSAE
- FCLSAF
- FCLSAG
- FCLSAH
- FCLSBA
- FCLSBB
- FCLSBC
- FCLSBD
- FCLSBE
- FCLSBF
- FCLSBG
- FCLSBH
- FCLSCA
- FCLSCB
- FCLSCC
- FCLSCD
- FCLSCE
- FCLSCF
- FCLSCG
- FCLSCH
- FCLSDA
- FCLSDB
- FCLSDC
- FCLSDE
- FCLSDF
- FCLSDG
- FCLSDH
- FCLSEA
- FCLSEB
- FCLSEC
- FCLSED
- FCLSEE
- FCLSEF
- FCLSEG
- FCLSEH
- FCLSFA
- FCLSFB
- FCLSFC
- FCLSFD
- FCLSFE
- FCLSFF
- FCLSFG
- FCLSFH
- FCLSGA
- FCLSGB
- FCLSGC
- FCLSGD
- FCLSGE
- FCLSGF
- FCLSGG
- FCLSGH
- FCLSHA
- FCLSHAA
- FCLSHAB
- FCLSHAC
- FCLSHAD
- FCLSHAE
- FCLSHAF
- FCLSHAG
- FCLSHAH
- FCLSHB
- FCLSHBA
- FCLSHBB
- FCLSHBC
- FCLSHBD
- FCLSHBE
- FCLSHBF
- FCLSHBG
- FCLSHBH
- FCLSHC
- FCLSHCA
- FCLSHCB
- FCLSHCC
- FCLSHCD
- FCLSHCE
- FCLSHCF
- FCLSHCG
- FCLSHCH
- FCLSHD
- FCLSHDA
- FCLSHDB
- FCLSHDC
- FCLSHDE
- FCLSHDF
- FCLSHDG
- FCLSHDH
- FCLSHE
- FCLSHEA
- FCLSHEB
- FCLSHEC
- FCLSHED
- FCLSHEE
- FCLSHEF
- FCLSHEG
- FCLSHEH
- FCLSHF
- FCLSHFA
- FCLSHFB
- FCLSHFC
- FCLSHFD
- FCLSHFE
- FCLSHFF
- FCLSHFG
- FCLSHFH
- FCLSHG
- FCLSHGA
- FCLSHGB
- FCLSHGC
- FCLSHGD
- FCLSHGE
- FCLSHGF
- FCLSHGG
- FCLSHGH
- FCLSHH
- FCLSHHA
- FCLSHHB
- FCLSHHC
- FCLSHHD
- FCLSHHE
- FCLSHHF
- FCLSHHG
- FCLSHHH
- GFCLAA
- GFCLAB
- GFCLAC
- GFCLAD
- GFCLAE
- GFCLAF
- GFCLAG
- GFCLAH
- GFCLBA
- GFCLBB
- GFCLBC
- GFCLBD
- GFCLBE
- GFCLBF
- GFCLBG
- GFCLBH
- GFCLCA
- GFCLCB
- GFCLCC
- GFCLCD
- GFCLCE
- GFCLCF
- GFCLCG
- GFCLCH
- GFCLDA
- GFCLDB
- GFCLDC
- GFCLDE
- GFCLDF
- GFCLDG
- GFCLDH
- GFCLEA
- GFCLEB
- GFCLEC
- GFCLED
- GFCLEE
- GFCLEF
- GFCLEG
- GFCLEH
- GFCLFA
- GFCLFB
- GFCLFC
- GFCLFD
- GFCLFE
- GFCLFF
- GFCLFG
- GFCLFH
- GFCLGA
- GFCLGB
- GFCLGC
- GFCLGD
- GFCLGE
- GFCLGF
- GFCLGG
- GFCLGH
- GFCLHA
- GFCLHB
- GFCLHC
- GFCLHD
- GFCLHE
- GFCLHF
- GFCLHG
- GFCLHH
- GFCLSHAA
- GFCLSHAB
- GFCLSHAC
- GFCLSHAD
- GFCLSHAE
- GFCLSHAF
- GFCLSHAG
- GFCLSHAH
- GFCLSHBA
- GFCLSHBB
- GFCLSHBC
- GFCLSHBD
- GFCLSHBE
- GFCLSHBF
- GFCLSHBG
- GFCLSHBH
- GFCLSHCA
- GFCLSHCB
- GFCLSHCC
- GFCLSHCD
- GFCLSHCE
- GFCLSHCF
- GFCLSHCG
- GFCLSHCH
- GFCLSHDA
- GFCLSHDB
- GFCLSHDC
- GFCLSHDE
- GFCLSHDF
- GFCLSHDG
- GFCLSHDH
- GFCLSHEA
- GFCLSHEB
- GFCLSHEC
- GFCLSHED
- GFCLSHEE
- GFCLSHEF
- GFCLSHEG
- GFCLSHEH
- GFCLSHFA
- GFCLSHFB
- GFCLSHFC
- GFCLSHFD
- GFCLSHFE
- GFCLSHFF
- GFCLSHFG
- GFCLSHFH
- GFCLSHGA
- GFCLSHGB
- GFCLSHGC
- GFCLSHGD
- GFCLSHGE
- GFCLSHGF
- GFCLSHGG
- GFCLSHGH
- GFCLSHHA
- GFCLSHHB
- GFCLSHHC
- GFCLSHHD
- GFCLSHHE
- GFCLSHHF
- GFCLSHHG
- GFCLSHHH
- PFCLAA
- PFCLAB
- PFCLAC
- PFCLAD
- PFCLAE
- PFCLAF
- PFCLAG
- PFCLAH
- PFCLBA
- PFCLBB
- PFCLBC
- PFCLBD
- PFCLBE
- PFCLBF
- PFCLBG
- PFCLBH
- PFCLCA
- PFCLCB
- PFCLCC
- PFCLCD
- PFCLCE
- PFCLCF
- PFCLCG
- PFCLCH
- PFCLDA
- PFCLDB
- PFCLDC
- PFCLDE
- PFCLDF
- PFCLDG
- PFCLDH
- PFCLEA
- PFCLEB
- PFCLEC
- PFCLED
- PFCLEE
- PFCLEF
- PFCLEG
- PFCLEH
- PFCLFA
- PFCLFB
- PFCLFC
- PFCLFD
- PFCLFE
- PFCLFF
- PFCLFG
- PFCLFH
- PFCLGA
- PFCLGB
- PFCLGC
- PFCLGD
- PFCLGE
- PFCLGF
- PFCLGG
- PFCLGH
- PFCLHA
- PFCLHAA
- PFCLHAB
- PFCLHAC
- PFCLHAD
- PFCLHAE
- PFCLHAF
- PFCLHAG
- PFCLHAH
- PFCLHB
- PFCLHBA
- PFCLHBB
- PFCLHBC
- PFCLHBD
- PFCLHBE
- PFCLHBF
- PFCLHBG
- PFCLHBH
- PFCLHC
- PFCLHCA
- PFCLHCB
- PFCLHCC
- PFCLHCD
- PFCLHCE
- PFCLHCF
- PFCLHCG
- PFCLHCH
- PFCLHD
- PFCLHDA
- PFCLHDB
- PFCLHDC
- PFCLHDE
- PFCLHDF
- PFCLHDG
- PFCLHDH
- PFCLHE
- PFCLHEA
- PFCLHEB
- PFCLHEC
- PFCLHED
- PFCLHEE
- PFCLHEF
- PFCLHEG
- PFCLHEH
- PFCLHF
- PFCLHFA
- PFCLHFB
- PFCLHFC
- PFCLHFD
- PFCLHFE
- PFCLHFF
- PFCLHFG
- PFCLHFH
- PFCLHG
- PFCLHGA
- PFCLHGB
- PFCLHGC
- PFCLHGD
- PFCLHGE
- PFCLHGF
- PFCLHGG
- PFCLHGH
- PFCLHH
- PFCLHHA
- PFCLHHB
- PFCLHHC
- PFCLHHD
- PFCLHHE
- PFCLHHF
- PFCLHHG
- PFCLHHH
-
Basic Shape
-
Shouldered -
Straight
-
-
CAD
- 2D
- 3D
Days to Ship
-
- All
- 9 Day(s) or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Pivot Pins - Both Ends Tapped
- Pivot Pins - Both Ends Threaded
- Keys for Precision Pivot Pins
- Precision Pivot Pins - Retaining Rings
- Pivot Pins Straight With Retaining Ring Grooves
- [Clean & Pack] Pivot Pin - Shouldered, Retaining Ring
- [Clean & Pack] Pivot Pin - Hex Socket, Shouldered, Lock Nut
- Pivot Pins Shouldered, Tapped
Complementary Products
-
Bearings with Housings - Direct Mount, Compact
MISUMI Standard Price : MYR 52.12- Days to Ship : 2 Day(s) or more
-
Urethane Rollers - with Collars - Set Screw Hole
MISUMI Standard Price : MYR 44.51- Days to Ship : 2 Day(s) or more
Customers Who Viewed This Item Also Viewed
Tech Support
- Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
- Tel：(60) 3 7890 6399
- 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday) - Technical Inquiry
- Credit Card
- Bank Transfer
Social Media
MISUMI Contact
Copyright © MISUMI Corporation All Rights Reserved.
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy