(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

MISUMI

[Features] Various combinations of both ends' shapes are available.

PDFP.1-227-2014

Part Number

Configured Part Number is shown.

 

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
Part Number
FPSPJBA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FPSPJBB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FPSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]
FPSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMC[3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]
FPSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]
FPSPJBD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-Q[2-50/1]
FPSPJBE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-Q[2-50/1]
FPSPJBF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-U[1-1500/1]
FPSPJEA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-P[2-50/1]
FPSPJEB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-P[2-50/1]
FPSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]-P[2-50/1]
FPSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]-P[2-50/1]
FPSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]-P[2-50/1]
FPSPJED-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-P[2-50/1]-Q[2-50/1]
FPSPJEE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-P[2-50/1]-Q[2-50/1]
FPSPJEF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-U[1-1500/1]-P[2-50/1]
FSPJBA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FSPJBB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]
FSPJBC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]
FSPJBD-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-Q[2-50/1]
FSPJBE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-Q[2-50/1]
FSPJBF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-U[1-1500/1]
FSPJEA-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-P[2-50/1]
FSPJEB-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-P[2-50/1]
FSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-S[0-90/1]-P[2-50/1]
FSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMC[0,​3,​4,​5,​6,​8,​15,​17,​20,​25,​30]-S[0-90/1]-P[2-50/1]
FSPJEC-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-QMS[10,​12,​14,​18]-S[0-90/1]-P[2-50/1]
FSPJED-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-T[0-250/0.5]-Q[2-50/1]
FSPJEE-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-T[0-250/0.5]-N[3,​4,​5,​6,​8,​10,​12,​16,​20,​24,​30]-P[2-50/1]-Q[2-50/1]
FSPJEF-D[6,​8,​10,​12,​13,​16,​20,​25,​30,​35,​40,​50]-L[20-1500/0.5]-F[0-250/0.5]-M[0,​3,​4,​5,​6,​8,​12,​16,​20,​24,​30]-U[1-1500/1]-P[2-50/1]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSBasic Shape End Shape (Left) End Shape (Right) Surface Treatment Shaft Dia. D
(Ø) 		Length L
(mm) 		B
(mm) 		Coarse [M]
(mm) 		Coarse [N]
(mm) 		F
(mm) 		Fine Thread [QMC]
(mm) 		Fine Thread [QMS]
(mm) 		H
(mm) 		P
(mm) 		Q
(mm) 		S
(mm) 		T
(mm) 		U
(mm) 		Change Thread Q to Fine One [QMC]
(mm) 		Tapped (Coarse) [N]
(mm) 		Change Thread Q to Fine One [QMS]
(mm) 		Tapped (Coarse Theread)
(mm)

-

1 Piece(s) 6 Day(s) or more 10HollowTappedNo MachiningHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 12-------------4 ～ 30

-

1 Piece(s) 6 Day(s) or more 10HollowTappedTappedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 123 ～ 12----------4 ～ 30-4 ～ 30

-

1 Piece(s) 6 Day(s) or more 10HollowTappedThreadedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 303 ～ 30------0 ～ 900 ～ 250-----

-

1 Piece(s) 6 Day(s) or more 10HollowTappedThreadedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 30--3 ～ 30----0 ～ 900 ～ 250-----

-

1 Piece(s) 6 Day(s) or more 10HollowTappedThreadedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 30---10 ～ 18---0 ～ 900 ～ 250-----

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedNo MachiningHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 12------2 ～ 50-0 ～ 250----4 ～ 30

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedTappedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 123 ～ 12-----2 ～ 50-0 ～ 250--0 ～ 30-4 ～ 30

-

1 Piece(s) 6 Day(s) or more 10HollowTappedWith Retaining Ring GroovesHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 12---------1 ～ 1500---0 ～ 30

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedNo MachiningHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250---2 ～ 50-------0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedTappedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 303 ～ 120 ～ 250---2 ～ 50-----4 ～ 30-0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedThreadedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 303 ～ 120 ～ 250---2 ～ 50-0 ～ 900 ～ 250--4 ～ 30-0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedThreadedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 2503 ～ 15--2 ～ 50-0 ～ 900 ～ 250-0 ～ 30--0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedThreadedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250-10-2 ～ 50-0 ～ 900 ～ 250---12 ～ 180

-

1 Piece(s) 6 Day(s) or more 10Hollow, Both Ends SteppedTappedNo MachiningHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250---2 ～ 502 ～ 50-0 ～ 250----0

-

1 Piece(s) 6 Day(s) or more 10Hollow, Both Ends SteppedTappedTappedHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 303 ～ 120 ～ 250---2 ～ 502 ～ 50-0 ～ 250--4 ～ 30--

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedWith Retaining Ring GroovesHard Chrome Plating6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250---2 ～ 50---1 ～ 1500---0

-

1 Piece(s) 6 Day(s) or more 10HollowTappedNo MachiningNot Provided6 ～ 5020 ～ 1500-3 ～ 12-------------4 ～ 30

-

1 Piece(s) 6 Day(s) or more 10HollowTappedTappedNot Provided6 ～ 5020 ～ 1500-3 ～ 123 ～ 12----------4 ～ 30-4 ～ 30

-

1 Piece(s) 6 Day(s) or more 10HollowTappedThreadedNot Provided6 ～ 5020 ～ 1500-3 ～ 123 ～ 12------0 ～ 900 ～ 250--0 ～ 30-0 ～ 30

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedNo MachiningNot Provided6 ～ 5020 ～ 1500-3 ～ 12------2 ～ 50-0 ～ 250----0 ～ 30

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedTappedNot Provided6 ～ 5020 ～ 1500-3 ～ 123 ～ 12-----2 ～ 50-0 ～ 250--0 ～ 30-0 ～ 30

-

1 Piece(s) 6 Day(s) or more 10HollowTappedWith Retaining Ring GroovesNot Provided6 ～ 5020 ～ 1500-3 ～ 12---------1 ～ 1500---0 ～ 30

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedNo MachiningNot Provided6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250---2 ～ 50-------0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedTappedNot Provided6 ～ 5020 ～ 1500-3 ～ 303 ～ 120 ～ 250---2 ～ 50-----4 ～ 30-0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedThreadedNot Provided6 ～ 5020 ～ 1500-3 ～ 303 ～ 120 ～ 250---2 ～ 50-0 ～ 900 ～ 250--4 ～ 30-0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedThreadedNot Provided6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 2503 ～ 15--2 ～ 50-0 ～ 900 ～ 250-0 ～ 30--0

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedThreadedNot Provided6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250-10-2 ～ 50-0 ～ 900 ～ 250---12 ～ 180

-

1 Piece(s) 6 Day(s) or more 10Hollow, Both Ends SteppedTappedNo MachiningNot Provided6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250----2 ～ 50-0 ～ 250----0

-

1 Piece(s) 6 Day(s) or more 10Hollow, Both Ends SteppedTappedTappedNot Provided6 ～ 5020 ～ 1500-3 ～ 303 ～ 120 ～ 250---2 ～ 502 ～ 50-0 ～ 250--4 ～ 30--

-

1 Piece(s) 6 Day(s) or more 10Hollow, One End SteppedTappedWith Retaining Ring GroovesNot Provided6 ～ 5020 ～ 1500-3 ～ 30-0 ～ 250---2 ～ 50---1 ～ 1500---0

Loading...

  1. 1

Basic Information

Material SUJ2 Equivalent Heat Treatment Induction Hardened Shaft Fit Tolerance g6
Hardness Induction Hardened (58HRC~)

Configure

Clear All

30 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Basic Shape

    • Hollow
    • Hollow, One End Stepped
    • Hollow, Both Ends Stepped

    Clear

  • End Shape (Right)

    • No Machining
    • Tapped
    • Threaded
    • With Retaining Ring Grooves

    Clear

  • Surface Treatment

    • Not Provided
    • Hard Chrome Plating

    Clear

  • Shaft Dia. D(Ø)

    • 6
    • 8
    • 10
    • 12
    • 13
    • 16
    • 20
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Length L(mm)

     [20-1500/0.5mm Unit(s)]

    Clear

  • B(mm)

     

    Clear

  • Coarse [M](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30

    Clear

  • Coarse [N](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30

    Clear

  • F(mm)

     [0-250/0.5mm Unit(s)]

    Clear

  • Fine Thread [QMC](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 15
    • 17
    • 20
    • 25
    • 30

    Clear

  • Fine Thread [QMS](mm)

    • 10
    • 12
    • 14
    • 18

    Clear

  • H(mm)

     

    Clear

  • P(mm)

     [2-50/1mm Unit(s)]

    Clear

  • Q(mm)

     [2-50/1mm Unit(s)]

    Clear

  • S(mm)

     [0-90/1mm Unit(s)]

    Clear

  • T(mm)

     [0-250/0.5mm Unit(s)]

    Clear

  • U(mm)

     [1-1500/1mm Unit(s)]

    Clear

  • Change Thread Q to Fine One [QMC](mm)

    • 0
    • 4
    • 5
    • 6
    • 8
    • 17
    • 20
    • 25
    • 30

    Clear

  • Tapped (Coarse) [N](mm)

    • 0
    • 4
    • 5
    • 6
    • 8
    • 10
    • 16
    • 20
    • 24
    • 30

    Clear

  • Change Thread Q to Fine One [QMS](mm)

    • 12
    • 14
    • 18

    Clear

  • Tapped (Coarse Theread)(mm)

    • 0
    • 4
    • 5
    • 6
    • 8
    • 10
    • 16
    • 20
    • 24
    • 30

    Clear

  • type

    • FPSPJAA
    • FPSPJAB
    • FPSPJAC
    • FPSPJAD
    • FPSPJAE
    • FPSPJAF
    • FPSPJBA
    • FPSPJBB
    • FPSPJBC
    • FPSPJBD
    • FPSPJBE
    • FPSPJBF
    • FPSPJCA
    • FPSPJCB
    • FPSPJCC
    • FPSPJCD
    • FPSPJCE
    • FPSPJCF
    • FPSPJDA
    • FPSPJDB
    • FPSPJDC
    • FPSPJDD
    • FPSPJDE
    • FPSPJDF
    • FPSPJEA
    • FPSPJEB
    • FPSPJEC
    • FPSPJED
    • FPSPJEE
    • FPSPJEF
    • FPSPJFA
    • FPSPJFB
    • FPSPJFC
    • FPSPJFD
    • FPSPJFE
    • FPSPJFF
    • FSPJ□□

    Clear

  • End Shape (Left)

    • No Machining
    • Tapped
    • Threaded
    • With Retaining Ring Grooves

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 6 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations)
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.