[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

Linear Shafts - Shaft Ends Configurable (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

Combination of both ends' shapes unavailable for standard products becomes available.

(i)Caution

Please note there is a possibility of chuck marks to appear on product.

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
FPSFJGF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-U[1-1500/1]
FPSFJGG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]
FPSFJGH-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-N[4,5,6,8,10,12]-W[6-24/1]
FPSFJGT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-Z[5-32/1]
FPSFJHA-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-R[5-40/1]
FPSFJHB-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-N[3,4,5,6,8,10,12,16,20,24,30]-R[1-50/1]
FPSFJHC-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-R[7-50/1]
FPSFJHC-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-T[0-250/0.5]-QMC[3,4,5,6,8,10,15,17,20,25,30]-S[0-90/1]-R[7-50/1]
FPSFJHC-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-R[7-50/1]
FPSFJHD-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1]-R[5-40/1]
FPSFJHE-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]-R[5-40/1]
FPSFJHF-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-U[1-1500/1]-R[5-40/1]
FPSFJHG-D[16,17,18,19,20]-L[20-1500/0.5]-M[4,5,6,8,10,12]-R[5-40/1]
FPSFJHH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[4,5,6,8,10,12]-N[4,5,6,8,10,12]-R[1-50/1]-W[7-40/1]
FPSFJHT-D[16,17,18,19,20]-L[20-1000/0.5]-M[4,5,6]-R[7-13/1]-Z[5-32/1]
FPSFJTA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-J[5-32/1]
FPSFJTB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-N[3,4,5,6,8,10,12]-J[5-32/1]
FPSFJTC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-N[3,4,5,6,8,10,12,16]-S[2-60/1]-J[5-32/1]
FPSFJTC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-QMC[3,4,5,6,8,10,12,15,17,20]-S[2-60/1]-J[5-32/1]
FPSFJTC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-QMS[10,12,14,18]-S[2-60/1]-J[5-32/1]
FPSFJTD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-Q[2-19/1]-J[5-32/1]
FPSFJTE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-T[2-95/0.5]-N[3,4,5,6,8,10,12]-Q[2-19/1]-J[5-32/1]
FPSFJTF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-U[2-500/1]-J[5-32/1]
FPSFJTG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-J[5-32/1]
FPSFJTH-D[16,17,18,19,20]-L[20-1000/0.5]-N[4,5,6]-W[6-24/1]-J[5-32/1]
FPSFJTT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-J[5-32/1]-Z[5-32/1]
FPSSFJAA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]
FPSSFJAB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]
FPSSFJAC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]
FPSSFJAD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-Q[2-50/1]
FPSSFJAE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJAF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-U[1-1500/1]
FPSSFJAG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]
FPSSFJAH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-N[4,5,6,8,10,12]-W[6-24/1]
FPSSFJAT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-Z[5-32/1]
FPSSFJBA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]
FPSSFJBB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]
FPSSFJBC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]
FPSSFJBD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-Q[2-50/1]
FPSSFJBE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJBF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-U[1-1500/1]
FPSSFJBG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]
FPSSFJBH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-W[6-30/1]
FPSSFJBT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-M[3,4,5,6,8,10,12]-Z[5-32/1]
FPSSFJCA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]
FPSSFJCA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]
FPSSFJCA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]
FPSSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30]
FPSSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30]
FPSSFJCB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-N[3,4,5,6,8,10,12,16,20,24,30]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-S[0-90/1]
FPSSFJCC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]
FPSSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSSFJCD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-Q[2-50/1]
FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJCE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-Q[2-50/1]
FPSSFJCF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-U[1-1500/1]
FPSSFJCF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-U[1-1500/1]
FPSSFJCF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]-U[1-1500/1]
FPSSFJCG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]
FPSSFJCG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-PMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]
FPSSFJCG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-PMS[10,12,14,18]-B[0-90/1]
FPSSFJCH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-B[0-90/1]-N[4,5,6,8,10]-W[6-25/1]
FPSSFJCH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-MMC[3,4,5,6,8,10,12,15,17,20,25,30]-B[0-90/1]-N[4,5,6,8,10]-W[6-25/1]
FPSSFJCH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-MMS[10,12,14,18]-B[0-90/1]-N[4,5,6,8,10]-W[6-25/1]
FPSSFJCT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-M[3,4,5,6,8,10,12,16]-B[2-60/1]-Z[5-32/1]
FPSSFJCT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-PMC[3,4,5,6,8,10,12,15,17,20]-B[2-60/1]-Z[5-32/1]
FPSSFJCT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-PMS[10,12,14,18]-B[2-60/1]-Z[5-32/1]
FPSSFJDA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]
FPSSFJDB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-S[0-90/1]-P[2-50/1]
FPSSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-QMC[3,4,5,6,8,10,12,15,17,20,25,30]-S[0-90/1]-P[2-50/1]
FPSSFJDC-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-QMS[10,12,14,18]-S[0-90/1]-P[2-50/1]
FPSSFJDD-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-P[2-50/1]-Q[2-50/1]
FPSSFJDE-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-T[0-250/0.5]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]-Q[2-50/1]
FPSSFJDF-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-U[1-1500/1]-P[2-50/1]
FPSSFJDG-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1500/0.5]-F[0-250/0.5]-P[2-50/1]
FPSSFJDH-D[16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-N[4,5,6,8,10]-P[2-50/1]-W[6-25/1]
FPSSFJDT-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20]-L[20-1000/0.5]-F[2-95/0.5]-P[2-19/1]-Z[5-32/1]
FPSSFJEA-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]
FPSSFJEB-D[6,7,8,9,10,12,13,14,15,16,17,18,19,20,22,24,25,26,28,30,31,32,35,38,40,45,50]-L[20-1500/0.5]-F[0-250/0.5]-M[3,4,5,6,8,10,12,16,20,24,30]-N[3,4,5,6,8,10,12,16,20,24,30]-P[2-50/1]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Basic Shape	End Shape (Left)	End Shape (Right)	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Shaft Fit Tolerance	Hardness	B (mm)	Change Thread M to Fine One [MMC] (mm)	Coarse [M] (mm)	Change Thread M to Fine One [MMS] (mm)	Coarse [N] (mm)	F (mm)	Fine Thread [PMC] (mm)	Fine Thread [PMS] (mm)	Fine Thread [QMC] (mm)	Fine Thread [QMS] (mm)	H (mm)	J (mm)	P (mm)	Q (mm)	R (mm)	S (mm)	T (mm)	QC	U (mm)	W (mm)	Z (mm)	Tapped (Coarse) [N] (mm)	Tapped (Coarse Theread) (mm)	Change to Fine Thread [PMC] (mm)	Change Thread Q to Fine One [QMS] (mm)	Change to Fine Thread [PMS] (mm)	Change Thread Q to Fine One [QMC] (mm)
-	1 Piece(s)	8 Day(s) or more	10	Solid	Hex Socket	With Retaining Ring Grooves	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Hex Socket	Hex Socket Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Hex Socket	Tapped Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	-	-	4 ～ 12	-	-	-	-	-	-	-	-	-	-	-	-	-	-	6 ～ 24	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Hex Socket	Tapered	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	-	-	-	-	-	-	-	-	-	-	5 ～ 40	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	3 ～ 30	-	-	-	-	-	-	-	-	-	1 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	3 ～ 30	-	-	-	-	-	-	-	-	-	7 ～ 50	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	-	-	-	-	3 ～ 30	-	-	-	-	-	7 ～ 50	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	-	-	-	-	-	10 ～ 18	-	-	-	-	7 ～ 50	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapped Hole	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	2 ～ 50	5 ～ 40	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapped Hole	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	5 ～ 40	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	With Retaining Ring Grooves	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	-	-	-	-	-	-	-	-	-	-	5 ～ 40	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	Hex Socket Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 20	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	-	-	-	-	-	-	-	-	-	-	5 ～ 40	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	Tapped Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (58HRC~)	-	-	4 ～ 12	-	4 ～ 12	-	-	-	-	-	-	-	-	-	1 ～ 50	-	-	-	-	7 ～ 40	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped Hole	Tapered	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	4 ～ 6	-	-	-	-	-	-	-	-	-	-	-	7 ～ 13	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	3 ～ 12	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	3 ～ 16	-	-	-	-	-	-	5 ～ 32	-	-	-	2 ～ 60	2 ～ 95	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	3 ～ 20	-	-	5 ～ 32	-	-	-	2 ～ 60	2 ～ 95	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	Threaded	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	10 ～ 18	-	5 ～ 32	-	-	-	2 ～ 60	2 ～ 95	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapered	No Machining	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	2 ～ 19	-	-	2 ～ 95	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapered	Tapped	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	3 ～ 12	-	-	-	-	-	-	5 ～ 32	-	2 ～ 19	-	-	2 ～ 95	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	With Retaining Ring Grooves	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-	2 ～ 500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	Hex Socket Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	Tapped Hole	[Steel] SUJ2 Equivalent	Hard Chrome Plating	16 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	4 ～ 6	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-	-	6 ～ 24	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapered	Tapered	[Steel] SUJ2 Equivalent	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (58HRC~)	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	No Machining	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	No Machining	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	No Machining	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	No Machining	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	No Machining	Tapped Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	4 ～ 12	-	-	-	-	-	-	-	-	-	-	-	-	-	-	6 ～ 24	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	No Machining	Tapered	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (56HRC~)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapped	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	3 ～ 30	-	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped	Tapped Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	6 ～ 30	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Tapped	Tapered	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (56HRC~)	-	-	3 ～ 12	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	-	10 ～ 18	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	3 ～ 30	0 ～ 250	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	3 ～ 30	0 ～ 250	-	10 ～ 18	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	-	0 ～ 250	-	-	3 ～ 30	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	-	0 ～ 250	-	-	-	10 ～ 18	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	3 ～ 30	-	-	10 ～ 18	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	3 ～ 30	-	3 ～ 30	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	3 ～ 30	0 ～ 250	3 ～ 30	-	-	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	3 ～ 30	0 ～ 250	-	10 ～ 18	-	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	-	10 ～ 18	3 ～ 30	-	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	-	10 ～ 18	-	10 ～ 18	-	-	-	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	-	0 ～ 250	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	3 ～ 30	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Threaded	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	-	10 ～ 18	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	3 ～ 30	0 ～ 250	3 ～ 30	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Threaded	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	3 ～ 30	0 ～ 250	-	10 ～ 18	-	-	-	-	-	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	-	10 ～ 18	-	-	-	-	-	-	-	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	3 ～ 30	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	-	-	0 ～ 250	-	10 ～ 18	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapped Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	3 ～ 30	-	4 ～ 10	0 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-	-	6 ～ 25	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapped Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	3 ～ 30	-	-	4 ～ 10	0 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-	-	6 ～ 25	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapped Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	0 ～ 90	-	-	10 ～ 18	4 ～ 10	0 ～ 250	-	-	-	-	-	-	-	-	-	-	-	-	-	6 ～ 25	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapered	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (56HRC~)	2 ～ 60	-	3 ～ 16	-	-	2 ～ 95	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapered	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (56HRC~)	2 ～ 60	-	-	-	-	2 ～ 95	3 ～ 20	-	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Solid	Threaded	Tapered	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (56HRC~)	2 ～ 60	-	-	-	-	2 ～ 95	-	10 ～ 18	-	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	0 ～ 250	-	-	3 ～ 30	-	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Threaded	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	0 ～ 250	-	-	-	10 ～ 18	-	-	2 ～ 50	-	-	0 ～ 90	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	No Machining	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	Both Ends Stepped	No Machining	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	2 ～ 50	-	-	0 ～ 250	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	With Retaining Ring Grooves	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	1 ～ 1500	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Hex Socket Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Tapped Hole	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	16 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	-	-	4 ～ 10	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	6 ～ 25	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	No Machining	Tapered	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 20	20 ～ 1000	g6	Induction Hardened (56HRC~)	-	-	-	-	-	2 ～ 95	-	-	-	-	-	-	2 ～ 19	-	-	-	-	-	-	-	5 ～ 32	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapped	No Machining	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	-	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-
-	1 Piece(s)	8 Day(s) or more	10	One End Stepped	Tapped	Tapped	[Stainless Steel] SUS440C or 13Cr stainless	Hard Chrome Plating	6 ～ 50	20 ～ 1500	g6	Induction Hardened (56HRC~)	-	-	3 ～ 30	-	3 ～ 30	0 ～ 250	-	-	-	-	-	-	2 ～ 50	-	-	-	-	-	-	-	-	-	-	-	-	-	-

Basic Information

Shaft End Perpendicularity	Perpendicularity (0.2)	Heat Treatment	Induction Hardened

Configure

711 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Basic Shape
- Solid
- One End Stepped
- Both Ends Stepped
Clear
End Shape (Left)
- No Machining
- Tapped
- Threaded
- With Retaining Ring Grooves
- Tapped Hole
- Hex Socket
- Tapered
Clear
End Shape (Right)
- No Machining
- Tapped
- Threaded
- With Retaining Ring Grooves
- Tapped Hole
- Hex Socket Hole
- Tapered
Clear
Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
Clear
Surface Treatment
- Not Provided
- Hard Chrome Plating
Clear
Shaft Dia. D(Ø)
6

7

8

9

10

12

13

14

15

16

17

18

19

20

22

24

25

26

28

30

31

32

35

38

40

45

50
Clear
Length L(mm)
[20-1500/0.5mm Unit(s)]
Clear
Shaft Fit Tolerance
g6

h5
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
Clear
B(mm)
[0-90/1mm Unit(s)]
Clear
Change Thread M to Fine One [MMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Coarse [M](mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Coarse [N](mm)
3

4

5

6

8

10

12

16

20

24

28

30
Clear
F(mm)
[0-250/0.5mm Unit(s)]
Clear
Fine Thread [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [PMS](mm)
10

12

14

18
Clear
Fine Thread [QMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30
Clear
Fine Thread [QMS](mm)
10

12

14

18
Clear
H(mm)
[1-1500/1mm Unit(s)]
Clear
J(mm)
[5-32/1mm Unit(s)]
Clear
P(mm)
[2-50/1mm Unit(s)]
Clear
Q(mm)
[2-50/1mm Unit(s)]
Clear
R(mm)
[1-50/1mm Unit(s)]
Clear
S(mm)
[0-1490/1mm Unit(s)]
Clear
T(mm)
[0-250/0.5mm Unit(s)]
Clear
QC
- QC
Clear
U(mm)
[1-1500/1mm Unit(s)]
Clear
W(mm)
[5-40/1mm Unit(s)]
Clear
Z(mm)
[5-32/1mm Unit(s)]
Clear
Tapped (Coarse) [N](mm)
0

4

5

6

8

10

16

20

24

30
Clear
Tapped (Coarse Theread)(mm)
4

5

6

8

10

16

20

24

30
Clear
Change to Fine Thread [PMC](mm)
4

5

6

8

10

15

17

20

25

30
Clear
Change Thread Q to Fine One [QMS](mm)
10

12

14

18
Clear
Change to Fine Thread [PMS](mm)
12

14

18
Clear
Change Thread Q to Fine One [QMC](mm)
0

3

4

5

6

8

10

12

15

17

20

25

30
Clear
type
- FPSFJAA
- FPSFJAB
- FPSFJAC
- FPSFJAD
- FPSFJAE
- FPSFJAF
- FPSFJAG
- FPSFJAH
- FPSFJAT
- FPSFJBA
- FPSFJBB
- FPSFJBC
- FPSFJBD
- FPSFJBE
- FPSFJBF
- FPSFJBG
- FPSFJBH
- FPSFJBT
- FPSFJCA
- FPSFJCB
- FPSFJCC
- FPSFJCD
- FPSFJCE
- FPSFJCF
- FPSFJCG
- FPSFJCH
- FPSFJCT
- FPSFJDA
- FPSFJDB
- FPSFJDC
- FPSFJDD
- FPSFJDE
- FPSFJDF
- FPSFJDG
- FPSFJDH
- FPSFJDT
- FPSFJEA
- FPSFJEB
- FPSFJEC
- FPSFJED
- FPSFJEE
- FPSFJEF
- FPSFJEG
- FPSFJEH
- FPSFJET
- FPSFJFA
- FPSFJFB
- FPSFJFC
- FPSFJFD
- FPSFJFE
- FPSFJFF
- FPSFJFG
- FPSFJFH
- FPSFJFT
- FPSFJGA
- FPSFJGB
- FPSFJGC
- FPSFJGD
- FPSFJGE
- FPSFJGF
- FPSFJGG
- FPSFJGH
- FPSFJGT
- FPSFJHA
- FPSFJHB
- FPSFJHC
- FPSFJHD
- FPSFJHE
- FPSFJHF
- FPSFJHG
- FPSFJHH
- FPSFJHT
- FPSFJTA
- FPSFJTB
- FPSFJTC
- FPSFJTD
- FPSFJTE
- FPSFJTF
- FPSFJTG
- FPSFJTH
- FPSFJTT
- FPSSFJAA
- FPSSFJAB
- FPSSFJAC
- FPSSFJAD
- FPSSFJAE
- FPSSFJAF
- FPSSFJAG
- FPSSFJAH
- FPSSFJAT
- FPSSFJBA
- FPSSFJBB
- FPSSFJBC
- FPSSFJBD
- FPSSFJBE
- FPSSFJBF
- FPSSFJBG
- FPSSFJBH
- FPSSFJBT
- FPSSFJCA
- FPSSFJCB
- FPSSFJCC
- FPSSFJCD
- FPSSFJCE
- FPSSFJCF
- FPSSFJCG
- FPSSFJCH
- FPSSFJCT
- FPSSFJDA
- FPSSFJDB
- FPSSFJDC
- FPSSFJDD
- FPSSFJDE
- FPSSFJDF
- FPSSFJDG
- FPSSFJDH
- FPSSFJDT
- FPSSFJEA
- FPSSFJEB
- FPSSFJEC
- FPSSFJED
- FPSSFJEE
- FPSSFJEF
- FPSSFJEG
- FPSSFJEH
- FPSSFJET
- FPSSFJFA
- FPSSFJFB
- FPSSFJFC
- FPSSFJFD
- FPSSFJFE
- FPSSFJFF
- FPSSFJFG
- FPSSFJFH
- FPSSFJFT
- FPSSFJGA
- FPSSFJGB
- FPSSFJGC
- FPSSFJGD
- FPSSFJGE
- FPSSFJGF
- FPSSFJGG
- FPSSFJGH
- FPSSFJGT
- FPSSFJHA
- FPSSFJHB
- FPSSFJHC
- FPSSFJHD
- FPSSFJHE
- FPSSFJHF
- FPSSFJHG
- FPSSFJHH
- FPSSFJHT
- FPSSFJTA
- FPSSFJTB
- FPSSFJTC
- FPSSFJTD
- FPSSFJTE
- FPSSFJTF
- FPSSFJTG
- FPSSFJTH
- FPSSFJTT
- FSFJAA
- FSFJAB
- FSFJAC
- FSFJAD
- FSFJAE
- FSFJAF
- FSFJAG
- FSFJAH
- FSFJAT
- FSFJBA
- FSFJBB
- FSFJBC
- FSFJBD
- FSFJBE
- FSFJBF
- FSFJBG
- FSFJBH
- FSFJBT
- FSFJCA
- FSFJCB
- FSFJCC
- FSFJCD
- FSFJCE
- FSFJCF
- FSFJCG
- FSFJCH
- FSFJCT
- FSFJDA
- FSFJDB
- FSFJDC
- FSFJDD
- FSFJDE
- FSFJDF
- FSFJDG
- FSFJDH
- FSFJDT
- FSFJEA
- FSFJEB
- FSFJEC
- FSFJED
- FSFJEE
- FSFJEF
- FSFJEG
- FSFJEH
- FSFJET
- FSFJFA
- FSFJFB
- FSFJFC
- FSFJFD
- FSFJFE
- FSFJFF
- FSFJFG
- FSFJFH
- FSFJFT
- FSFJGA
- FSFJGB
- FSFJGC
- FSFJGD
- FSFJGE
- FSFJGF
- FSFJGG
- FSFJGH
- FSFJGT
- FSFJHA
- FSFJHB
- FSFJHC
- FSFJHD
- FSFJHE
- FSFJHF
- FSFJHG
- FSFJHH
- FSFJHT
- FSFJTA
- FSFJTB
- FSFJTC
- FSFJTD
- FSFJTE
- FSFJTF
- FSFJTG
- FSFJTH
- FSFJTT
- FSFUAA
- FSFUAB
- FSFUAC
- FSFUAD
- FSFUAE
- FSFUAF
- FSFUAG
- FSFUAH
- FSFUAT
- FSFUBA
- FSFUBB
- FSFUBC
- FSFUBD
- FSFUBE
- FSFUBF
- FSFUBG
- FSFUBH
- FSFUBT
- FSFUCA
- FSFUCB
- FSFUCC
- FSFUCD
- FSFUCE
- FSFUCF
- FSFUCG
- FSFUCH
- FSFUCT
- FSFUDA
- FSFUDB
- FSFUDC
- FSFUDD
- FSFUDE
- FSFUDF
- FSFUDG
- FSFUDH
- FSFUDT
- FSFUEA
- FSFUEB
- FSFUEC
- FSFUED
- FSFUEE
- FSFUEF
- FSFUEG
- FSFUEH
- FSFUET
- FSFUFA
- FSFUFB
- FSFUFC
- FSFUFD
- FSFUFE
- FSFUFF
- FSFUFG
- FSFUFH
- FSFUFT
- FSFUGA
- FSFUGB
- FSFUGC
- FSFUGD
- FSFUGE
- FSFUGF
- FSFUGG
- FSFUGH
- FSFUGT
- FSFUHA
- FSFUHB
- FSFUHC
- FSFUHD
- FSFUHE
- FSFUHF
- FSFUHG
- FSFUHH
- FSFUHT
- FSFUTA
- FSFUTB
- FSFUTC
- FSFUTD
- FSFUTE
- FSFUTF
- FSFUTG
- FSFUTH
- FSFUTT
- FSSFJAA
- FSSFJAB
- FSSFJAC
- FSSFJAD
- FSSFJAE
- FSSFJAF
- FSSFJAG
- FSSFJAH
- FSSFJAT
- FSSFJBA
- FSSFJBB
- FSSFJBC
- FSSFJBD
- FSSFJBE
- FSSFJBF
- FSSFJBG
- FSSFJBH
- FSSFJBT
- FSSFJCA
- FSSFJCB
- FSSFJCC
- FSSFJCD
- FSSFJCE
- FSSFJCF
- FSSFJCG
- FSSFJCH
- FSSFJCT
- FSSFJDA
- FSSFJDB
- FSSFJDC
- FSSFJDD
- FSSFJDE
- FSSFJDF
- FSSFJDG
- FSSFJDH
- FSSFJDT
- FSSFJEA
- FSSFJEB
- FSSFJEC
- FSSFJED
- FSSFJEE
- FSSFJEF
- FSSFJEG
- FSSFJEH
- FSSFJET
- FSSFJFA
- FSSFJFB
- FSSFJFC
- FSSFJFD
- FSSFJFE
- FSSFJFF
- FSSFJFG
- FSSFJFH
- FSSFJFT
- FSSFJGA
- FSSFJGB
- FSSFJGC
- FSSFJGD
- FSSFJGE
- FSSFJGF
- FSSFJGG
- FSSFJGH
- FSSFJGT
- FSSFJHA
- FSSFJHB
- FSSFJHC
- FSSFJHD
- FSSFJHE
- FSSFJHF
- FSSFJHG
- FSSFJHH
- FSSFJHT
- FSSFJTA
- FSSFJTB
- FSSFJTC
- FSSFJTD
- FSSFJTE
- FSSFJTF
- FSSFJTG
- FSSFJTH
- FSSFJTT
- FSSFUAA
- FSSFUAB
- FSSFUAC
- FSSFUAD
- FSSFUAE
- FSSFUAF
- FSSFUAG
- FSSFUAH
- FSSFUAT
- FSSFUBA
- FSSFUBB
- FSSFUBC
- FSSFUBD
- FSSFUBE
- FSSFUBF
- FSSFUBG
- FSSFUBH
- FSSFUBT
- FSSFUCA
- FSSFUCB
- FSSFUCC
- FSSFUCD
- FSSFUCE
- FSSFUCF
- FSSFUCG
- FSSFUCH
- FSSFUCT
- FSSFUDA
- FSSFUDB
- FSSFUDC
- FSSFUDD
- FSSFUDE
- FSSFUDF
- FSSFUDG
- FSSFUDH
- FSSFUDT
- FSSFUEA
- FSSFUEB
- FSSFUEC
- FSSFUED
- FSSFUEE
- FSSFUEF
- FSSFUEG
- FSSFUEH
- FSSFUET
- FSSFUFA
- FSSFUFB
- FSSFUFC
- FSSFUFD
- FSSFUFE
- FSSFUFF
- FSSFUFG
- FSSFUFH
- FSSFUFT
- FSSFUGA
- FSSFUGB
- FSSFUGC
- FSSFUGD
- FSSFUGE
- FSSFUGF
- FSSFUGG
- FSSFUGH
- FSSFUGT
- FSSFUHA
- FSSFUHB
- FSSFUHC
- FSSFUHD
- FSSFUHE
- FSSFUHF
- FSSFUHG
- FSSFUHH
- FSSFUHT
- FSSFUTA
- FSSFUTB
- FSSFUTC
- FSSFUTD
- FSSFUTE
- FSSFUTF
- FSSFUTG
- FSSFUTH
- FSSFUTT
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports T-Shaped Slit (Machined) - Standard / Wide
MISUMI Days to Ship : 4 Day(s) or more
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI Standard Price : MYR 35.15- Days to Ship : 2 Day(s) or more
Shaft Collar (Wedge) - 2-Hole / 2-Tapped (Coarse)
MISUMI Standard Price : MYR 32.46- Days to Ship : 2 Day(s) or more
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI Standard Price : MYR 65.47- Days to Ship : 1 Day(s) or more
Linear Bushings - Single
MISUMI Standard Price : MYR 13.98- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Linear Shafts-Straight Type
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts-Both Ends Tapped
MISUMI

Days to Ship : 3 Day(s) or more
Flanged Linear Bushings - Single, Opposite Counterbored Hole
MISUMI

Standard Price : MYR 21.83-

Days to Ship : 1 Day(s) or more
Linear Shafts-One End Tapped
MISUMI

Days to Ship : 3 Day(s) or more
Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable
MISUMI

Days to Ship : 6 Day(s) or more
Rotary Shafts D Tolerance h9 (Cold-drawn) / h7 (Ground) / g6 (Ground) - One End Stepped and Threaded, One End Tapped
MISUMI

Days to Ship : 5 Day(s) or more
Linear Shafts - With Retaining Ring Grooves -
MISUMI

Days to Ship : 3 Day(s) or more
Shafts - Hollow Shafts
MISUMI

Days to Ship : 3 Day(s) or more
Precision Linear Shafts - Fully Plated Straight Type
MISUMI

Days to Ship : 4 Day(s) or more
Retaining Rings/External/C-Type
MISUMI

Standard Price : MYR 2.67-

Days to Ship : 1 Day(s) or more
Metal Washers - Thickness +-0.10 & +-0.01 mm/Dimensions Configurable
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts-Both Ends Stepped and Female Thread-
MISUMI

Days to Ship : 3 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

Linear Shafts - Shaft Ends Configurable (Part Numbers)

(i)Caution

Part Number

Basic Information

Configure

Specification/Dimensions

Basic Shape

End Shape (Left)

End Shape (Right)

Material

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Shaft Fit Tolerance

Hardness

B(mm)

Change Thread M to Fine One [MMC](mm)

Coarse [M](mm)

Change Thread M to Fine One [MMS](mm)

Coarse [N](mm)

F(mm)

Fine Thread [PMC](mm)

Fine Thread [PMS](mm)

Fine Thread [QMC](mm)

Fine Thread [QMS](mm)

H(mm)

J(mm)

P(mm)

Q(mm)

R(mm)

S(mm)

T(mm)

QC

U(mm)

W(mm)

Z(mm)

Tapped (Coarse) [N](mm)

Tapped (Coarse Theread)(mm)

Change to Fine Thread [PMC](mm)

Change Thread Q to Fine One [QMS](mm)

Change to Fine Thread [PMS](mm)

Change Thread Q to Fine One [QMC](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm