[Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped (Part Numbers)

Click this image to zoom it.

Move the mouse over the image to zoom

[Features] Linear motion shafts (linear shafts, hardened shafts, guide shafts, slide shafts) with high perpendicularity accuracy (0.03) and guaranteed coaxiality of 0.02.One end stepped, one end male thread/both ends female thread/one end Male thread/one end female thread/with spanner groove.

Part Number

Configured Part Number is shown.

Product TOP

Part Number

CAD Data download and 3D preview are not available because the part number has not yet been determined.

*In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.

CAD Download

: 30; 60; 90

Part Number
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B0-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-M[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S0-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-N[3,4,5,6]
VFAM8-[25-295/1]-F[5-30/1]-B[3-18/1]-P[3,4,5,6,7]-MMC[3,4,5,6]-T[5-30/1]-S[3-18/1]-Q[3,4,5,6,7]-NMC[3,4,5,6]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-NMC[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-NMC[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-NMC[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B0-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-NMC[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-NMC[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-M[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-NMC[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S0-Q[4-9/1]-NMC[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-N[4,5,6,8]
VFAM10-[25-344/1]-F[5-45/1]-B[4-24/1]-P[4-9/1]-MMC[4,5,6,8]-T[5-45/1]-S[4-24/1]-Q[4-9/1]-NMC[4,5,6,8]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-T[5-55/1]-S0-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-T[5-55/1]-S0-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-T[5-55/1]-S0-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-T[5-55/1]-S[5-30/1]-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B0-P[5-11/1]-MMS10-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-M[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S0-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMC[5,6,8,10]-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-T[5-55/1]-S0-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-T[5-55/1]-S0-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-T[5-55/1]-S0-Q[5-11/1]-NMS10
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-T[5-55/1]-S[5-30/1]-Q[5-11/1]-N[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMC[5,6,8,10]
VFAM12-[25-343/1]-F[5-55/1]-B[5-30/1]-P[5-11/1]-MMS10-T[5-55/1]-S[5-30/1]-Q[5-11/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-T[5-60/1]-S0-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-T[5-60/1]-S0-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-T[5-60/1]-S0-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-T[5-60/1]-S[5-30/1]-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B0-P[5-12/1]-MMS10-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMC[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-M[5,6,8,10]-T[5-60/1]-S[5-30/1]-Q[5-12/1]-NMS10
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-N[5,6,8,10]
VFAM13-[25-343/1]-F[5-60/1]-B[5-30/1]-P[5-12/1]-MMC[5,6,8,10]-T[5-60/1]-S0-Q[5-12/1]-NMC[5,6,8,10]

Standard Unit Price	Minimum order quantity	Days to Ship	RoHS	Basic Shape	End Shape (Right)	Material	Surface Treatment	Shaft Dia. D (Ø)	Length L (mm)	Hardness	Add Wrench Flats at One Location [SC] (mm)	B (mm)	Change Tapped Thread J to Fine One [JSC] (mm)	Change Thread M to Fine One [MMC] (mm)	Change Thread M to Fine One [MMS] (mm)	Change Thread N to Fine One [NMC] (mm)	Change Thread N to Fine One [NMS] (mm)	F (mm)	P (mm)	Q (mm)	S (mm)	T (mm)	Tapped (Coarse (mm)	Threaded (Coarse) [M] (mm)	Threaded (Coarse) [N] (mm)
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	-	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	-	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	0	-	3 ～ 6	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	-	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	3 ～ 6	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	-	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	3 ～ 6	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	-	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	3 ～ 6	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	-	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	3 ～ 6	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	3 ～ 6	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	-	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	3 ～ 6	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	0	5 ～ 30	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	3 ～ 6	-	-	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	-	3 ～ 6
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	8	25 ～ 295	Induction Hardened (58HRC~)	-	3 ～ 18	-	3 ～ 6	-	3 ～ 6	-	5 ～ 30	3 ～ 7	3 ～ 7	3 ～ 18	5 ～ 30	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	4 ～ 8	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	-	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	4 ～ 8	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	4 ～ 8	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	-	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	4 ～ 8	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	4 ～ 8	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	-	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	4 ～ 8	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	4 ～ 8	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	-	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	0	-	4 ～ 8	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	-	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	4 ～ 8	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	-	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	4 ～ 8	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	-	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	4 ～ 8	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	-	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	4 ～ 8	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	4 ～ 8	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	-	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	4 ～ 8	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	0	5 ～ 45	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	4 ～ 8	-	-	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	-	4 ～ 8
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	10	25 ～ 344	Induction Hardened (58HRC~)	-	4 ～ 24	-	4 ～ 8	-	4 ～ 8	-	5 ～ 45	4 ～ 9	4 ～ 9	4 ～ 24	5 ～ 45	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	10	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	10	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	-	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	-	10	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	10	-	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	10	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	10	-	10	5 ～ 55	5 ～ 11	5 ～ 11	0	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	10	-	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	10	5 ～ 10	-	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	12	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	10	-	10	5 ～ 55	5 ～ 11	5 ～ 11	5 ～ 30	5 ～ 55	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	10	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	-	-	10	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	10	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	5 ～ 10	-	-	10	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	10	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	0	-	-	10	-	10	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	-	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	10	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	5 ～ 10	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	-	-	-	10	5 ～ 60	5 ～ 12	5 ～ 12	5 ～ 30	5 ～ 60	-	5 ～ 10	-
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	-	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	5 ～ 10
-	1 Piece(s)	7 Day(s)	10	Both Ends Stepped	Threaded	[Steel] SUJ2 Equivalent	Not Provided	13	25 ～ 343	Induction Hardened (58HRC~)	-	5 ～ 30	-	5 ～ 10	-	5 ～ 10	-	5 ～ 60	5 ～ 12	5 ～ 12	0	5 ～ 60	-	-	-

Basic Information

End Shape (Left)	Threaded	Shaft End Perpendicularity	Perpendicularity (0.03)	Heat Treatment	Induction Hardened
Shaft Fit Tolerance	g6

Configure

4,495 Part Numbers

View Part Numbers

Configure Remaining Specifications

Completed

Specification/Dimensions

Basic Shape
- One End Stepped
- Both Ends Stepped
Clear
End Shape (Right)
- No Machining
- Tapped
- Threaded
Clear
Material
- Steel
  - SUJ2 Equivalent
- Stainless Steel
  - SUS440C or 13Cr stainless
Clear
Surface Treatment
- Not Provided
- Low Temperature Black Chrome Plating
Clear
Shaft Dia. D(Ø)
4

5

6

8

10

12

13

15

16

18

20

25

30
Clear
Length L(mm)
[25-445/1mm Unit(s)]
Clear
Hardness
- Induction Hardened (56HRC~)
- Induction Hardened (58HRC~)
Clear
Add Wrench Flats at One Location [SC](mm)
[0-435/1mm Unit(s)]
Clear
B(mm)
0
[3-72/1mm Unit(s)]
Clear
Change Tapped Thread J to Fine One [JSC](mm)
8

10

12

14

18
Clear
Change Thread M to Fine One [MMC](mm)
3

4

5

6

8

10

12

15

17

20

25
Clear
Change Thread M to Fine One [MMS](mm)
10

12

14

18
Clear
Change Thread N to Fine One [NMC](mm)
3

4

5

6

8

10

12

15

17

20

25
Clear
Change Thread N to Fine One [NMS](mm)
10

12

14

18
Clear
F(mm)
[5-145/1mm Unit(s)]
Clear
P(mm)
3

4

5

6

7
[4-29/1mm Unit(s)]
Clear
Q(mm)
3

4

5

6

7
[4-29/1mm Unit(s)]
Clear
S(mm)
0
[3-72/1mm Unit(s)]
Clear
T(mm)
[5-145/1mm Unit(s)]
Clear
Tapped (Coarse(mm)
2

2.6

3

4

5

6

8

10

12

15

16

20
Clear
Threaded (Coarse) [M](mm)
0

3

4

5

6

8

10

12

16

20

24
Clear
Threaded (Coarse) [N](mm)
0

3

4

5

6

8

10

12

16

20

24
Clear
type
- VFAD
- VFAM
- VFAN
- VFPD
- VFPM
- VFPN
- VRAD
- VRAM
- VRAN
- VRPD
- VRPM
- VRPN
- VSFAD
- VSFAM
- VSFAN
- VSFPD
- VSFPM
- VSFPN
- VSRAD
- VSRAM
- VSRAN
- VSRPD
- VSRPM
- VSRPN
Clear
CAD
- 2D
- 3D
Clear

Days to Ship

All

7 Day(s) or Less

8 Day(s) or Less
Clear

Specify Alterations

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Additional Products in this Category

Complementary Products

Shaft Supports T-Shaped Slit (Machined) - Standard / Wide
MISUMI Days to Ship : 4 Day(s) or more
Oil Free Bushing Housing Units - Standard Flanged - Standard - Built-In Copper Alloy Bushings, Single / Double
MISUMI Standard Price : MYR 35.15- Days to Ship : 2 Day(s) or more
Shaft Collar (Wedge) - 2-Hole / 2-Tapped (Coarse)
MISUMI Standard Price : MYR 32.46- Days to Ship : 2 Day(s) or more
Shaft-sliding Linear Bushing Housing Units - Single / Double
MISUMI Standard Price : MYR 65.47- Days to Ship : 1 Day(s) or more
Linear Bushings - Single
MISUMI Standard Price : MYR 13.98- Days to Ship : 1 Day(s) or more

Customers Who Viewed This Item Also Viewed

Linear Shafts - Shaft Ends Configurable
MISUMI

Days to Ship : 8 Day(s) or more
Linear Shafts-One End Stepped and Threaded / Both Ends Stepped and Threaded
MISUMI

Days to Ship : 6 Day(s) or more
Linear Shafts One End Threaded with Undercut
MISUMI

Days to Ship : 6 Day(s) or more
Precision Linear Shafts - One End Stepped and Male Thread One End Female Thread Type
MISUMI

Days to Ship : 6 Day(s) or more
Precision Linear Shafts - Fully Plated Straight Type
MISUMI

Days to Ship : 4 Day(s) or more
Precision Linear Shafts - One End Male Thread One End Female Thread Type with Undercut - Wrench Flat Type
MISUMI

Days to Ship : 6 Day(s) or more
Linear Shafts-Both Ends Stepped and Female Thread-
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts-Both Ends Threaded
MISUMI

Days to Ship : 3 Day(s) or more
Hollow Shafts / End-Washers for Linear Shafts - Shaft Ends Configurable
MISUMI

Days to Ship : 6 Day(s) or more
Linear Shafts-One End Threaded
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts-One End Threaded One End Tapped
MISUMI

Days to Ship : 3 Day(s) or more
Linear Shafts High-Both Ends Male Thread with Thread Dia. Equal to Shaft Dia.-
MISUMI

Days to Ship : 6 Day(s) or more

back next

Tech Support

Factory Automation, Electronics, Tools, & MRO (Maintenance, Repair and Operations): Tel：(60) 3 7890 6399; 9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday); Technical Inquiry

How can we improve?

High Precision Linear Shafts - Stepped Ends / Stepped Ends with Wrench Flats - One End Threaded / Both Ends Threaded / One End Threaded / One End Tapped (Part Numbers)

Part Number

Basic Information

Configure

Specification/Dimensions

Basic Shape

End Shape (Right)

Material

Surface Treatment

Shaft Dia. D(Ø)

Length L(mm)

Hardness

Add Wrench Flats at One Location [SC](mm)

B(mm)

Change Tapped Thread J to Fine One [JSC](mm)

Change Thread M to Fine One [MMC](mm)

Change Thread M to Fine One [MMS](mm)

Change Thread N to Fine One [NMC](mm)

Change Thread N to Fine One [NMS](mm)

F(mm)

P(mm)

Q(mm)

S(mm)

T(mm)

Tapped (Coarse(mm)

Threaded (Coarse) [M](mm)

Threaded (Coarse) [N](mm)

type

CAD

Days to Ship

Specify Alterations

Additional Products in this Category

Complementary Products

Customers Who Viewed This Item Also Viewed

Tech Support

Payment Method

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm, 9am – 1pm(Sat) * Order cut-off time is 12pm