(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type- (Part Numbers)

Gas Release One-Step Core Pins -Shaft Diameter (D) Selection Type-

Click this image to zoom it.

Move the mouse over the image to zoom

MISUMI

MISUMI

This is a single-stage gas vent core pin with a fixed shaft diameter (D). You can choose from no tip machining, C chamfering, conical machining, tapered machining, R chamfering, and spherical machining.

PDFP.467

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 38
  3. 39
  4. 40
  5. 41
  6. 42
Part Number
GV-CPX-1DT13-[16.5-120/0.01]-F[14.5-119.3/0.01]-A[2-12.99/0.01]-V[2-12.99/0.01]-CVC[0.5-1/0.01]-K[10-45/1]-S[0.1-36.8/0.1]-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPX-1DT13-[16.5-120/0.01]-F[14.5-119.3/0.01]-A[2-12.99/0.01]-V[2-12.99/0.01]-CVC[0.5-1/0.01]-K[10-45/1]-S[0.1-36.8/0.1]-N[0.5-15/0.1]-SVC
GV-CPX-1DT13-[16.5-120/0.01]-FC[5-14.49/0.01]-A[2-12.99/0.01]-V[2-12.99/0.01]-C[0.1-4/0.1]-K[10-45/1]-S[0.1-36.8/0.1]-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPX-1DT13-[16.5-120/0.01]-FC[5-14.49/0.01]-A[2-12.99/0.01]-V[2-12.99/0.01]-C[0.1-4/0.1]-K[10-45/1]-S[0.1-36.8/0.1]-N[0.5-15/0.1]-SVC
GV-CPX-1DT13-[16.5-120/0.01]-FC[5-14.49/0.01]-A[2-12.99/0.01]-V[2-12.99/0.01]-CVC[0.5-1/0.01]-K[10-45/1]-S[0.1-36.8/0.1]-N[0.5-15/0.1]-SV[2-60/0.5]
GV-CPX-1DT13-[16.5-120/0.01]-FC[5-14.49/0.01]-A[2-12.99/0.01]-V[2-12.99/0.01]-CVC[0.5-1/0.01]-K[10-45/1]-S[0.1-36.8/0.1]-N[0.5-15/0.1]-SVC
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSMaterial Shaft diameter tolerance L dimension tolerance Tip gradient tolerance D/P (Shaft diameter)
(mm) 		Step (Step shape of the first step) Shape (Tip shape) A (Step shape diameter)
(mm) 		C (Step type taper width)
(mm) 		CVC (Designation of C dimension in increments of 0.01mm)
(mm) 		DC (Gas release section diameter)
(mm) 		Extend the flat section SV to the bottom F (Bearing bore length)
(mm) 		FC (Makes F dimension shorter than F min)
(mm) 		G (Tip C chamfering width)
(mm) 		K (Tip angle)
(°) 		L (L dimension)
(mm) 		N (Gas release section diameter)
(mm) 		Q (Tip R chamfering)
(mm) 		S (Tip tapered width)
(mm) 		SV (Gas release facet cutting length)
(mm) 		V (Tip diameter)
(mm) 		VC (V dimension alteration, smaller than V min)
(mm) 		When DC = D, DCX is applied

-

1 Piece(s) 6 Day(s) or more 10SKH51-0.01/-0.02+0.02/0±0.015131DT2 ～ 12.99-0.5 ～ 1--14.5 ～ 119.3--10 ～ 4516.5 ～ 1200.5 ～ 15-0.1 ～ 36.82 ～ 602 ～ 12.99--

-

1 Piece(s) 6 Day(s) or more 10SKH51-0.01/-0.02+0.02/0±0.015131DT2 ～ 12.99-0.5 ～ 1-SVC14.5 ～ 119.3--10 ～ 4516.5 ～ 1200.5 ～ 15-0.1 ～ 36.8-2 ～ 12.99--

-

1 Piece(s) 6 Day(s) or more 10SKH51-0.01/-0.02+0.02/0±0.015131DT2 ～ 12.990.1 ～ 4----5 ～ 14.49-10 ～ 4516.5 ～ 1200.5 ～ 15-0.1 ～ 36.82 ～ 602 ～ 12.99--

-

1 Piece(s) 6 Day(s) or more 10SKH51-0.01/-0.02+0.02/0±0.015131DT2 ～ 12.990.1 ～ 4--SVC-5 ～ 14.49-10 ～ 4516.5 ～ 1200.5 ～ 15-0.1 ～ 36.8-2 ～ 12.99--

-

1 Piece(s) 6 Day(s) or more 10SKH51-0.01/-0.02+0.02/0±0.015131DT2 ～ 12.99-0.5 ～ 1---5 ～ 14.49-10 ～ 4516.5 ～ 1200.5 ～ 15-0.1 ～ 36.82 ～ 602 ～ 12.99--

-

1 Piece(s) 6 Day(s) or more 10SKH51-0.01/-0.02+0.02/0±0.015131DT2 ～ 12.99-0.5 ～ 1-SVC-5 ～ 14.49-10 ～ 4516.5 ～ 1200.5 ～ 15-0.1 ～ 36.8-2 ～ 12.99--

Loading...

  1. << Prev
  2. 38
  3. 39
  4. 40
  5. 41
  6. 42
 

Basic Information

Shape type One-step gas release Surface treatment No Head thickness 4mm(T4)
Step (Step shape of the second step) No second step

Configure

Clear All

3,696 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Material

    • SKH51
    • SKD61
    • NAK80
    • DH2F

    Clear

  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02

    Clear

  • L dimension tolerance

    • +0.02/0
    • 0/-0.1

    Clear

  • Tip gradient tolerance

    • ±0.01
    • ±0.015

    Clear

  • D/P (Shaft diameter)(mm)

    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 7
    • 8
    • 10
    • 13

    Clear

  • Step (Step shape of the first step)

    • 1A
    • 1B
    • 1C
    • 1D

    Clear

  • A (Step shape diameter)(mm)

     [0.4-12.99/0.01mm Unit(s)]

    Clear

  • C (Step type taper width)(mm)

     [0.1-4/0.1mm Unit(s)]

    Clear

  • CVC (Designation of C dimension in increments of 0.01mm)(mm)

    • 0.5

     [0.5-1/0.01mm Unit(s)]

    Clear

  • DC (Gas release section diameter)(mm)

     [6.92-6.999/0.001mm Unit(s)][7.92-7.999/0.001mm Unit(s)][9.92-9.999/0.001mm Unit(s)][12.92-12.999/0.001mm Unit(s)][0.92-0.995/0.005mm Unit(s)][1.42-1.495/0.005mm Unit(s)][1.92-1.995/0.005mm Unit(s)][2.42-2.495/0.005mm Unit(s)][2.92-2.995/0.005mm Unit(s)][3.42-3.495/0.005mm Unit(s)][3.92-3.995/0.005mm Unit(s)][4.42-4.495/0.005mm Unit(s)][4.92-4.995/0.005mm Unit(s)][5.42-5.495/0.005mm Unit(s)][5.92-5.995/0.005mm Unit(s)]

    Clear

  • Extend the flat section SV to the bottom

    • SVC

    Clear

  • F (Bearing bore length)(mm)

     [14.5-119.4/0.01mm Unit(s)]

    Clear

  • FC (Makes F dimension shorter than F min)(mm)

     [5-14.49/0.01mm Unit(s)]

    Clear

  • G (Tip C chamfering width)(mm)

    • 0.4
    • 0.5

     

    Clear

  • K (Tip angle)(°)

     [10-45/1° Unit(s)]

    Clear

  • L (L dimension)(mm)

     [16.5-120/0.01mm Unit(s)]

    Clear

  • N (Gas release section diameter)(mm)

     [0.3-15/0.1mm Unit(s)]

    Clear

  • Q (Tip R chamfering)(mm)

     

    Clear

  • S (Tip tapered width)(mm)

     [0.1-36.8/0.1mm Unit(s)]

    Clear

  • SV (Gas release facet cutting length)(mm)

     [2-60/0.5mm Unit(s)]

    Clear

  • V (Tip diameter)(mm)

     [0.5-12.99/0.01mm Unit(s)]

    Clear

  • VC (V dimension alteration, smaller than V min)(mm)

     [0.4-0.49/0.01mm Unit(s)][0.7-1.99/0.01mm Unit(s)]

    Clear

  • When DC = D, DCX is applied

    • DCX

    Clear

  • type

    • GV-CPD-1A
    • GV-CPD-1AB
    • GV-CPD-1AC
    • GV-CPD-1AG
    • GV-CPD-1AR
    • GV-CPD-1AT
    • GV-CPD-1B
    • GV-CPD-1BB
    • GV-CPD-1BC
    • GV-CPD-1BG
    • GV-CPD-1BR
    • GV-CPD-1BT
    • GV-CPD-1C
    • GV-CPD-1CB
    • GV-CPD-1CC
    • GV-CPD-1CG
    • GV-CPD-1CR
    • GV-CPD-1CT
    • GV-CPD-1D
    • GV-CPD-1DB
    • GV-CPD-1DC
    • GV-CPD-1DG
    • GV-CPD-1DR
    • GV-CPD-1DT
    • GV-CPF-1A
    • GV-CPF-1AB
    • GV-CPF-1AC
    • GV-CPF-1AG
    • GV-CPF-1AR
    • GV-CPF-1AT
    • GV-CPF-1B
    • GV-CPF-1BB
    • GV-CPF-1BC
    • GV-CPF-1BG
    • GV-CPF-1BR
    • GV-CPF-1BT
    • GV-CPF-1C
    • GV-CPF-1CB
    • GV-CPF-1CC
    • GV-CPF-1CG
    • GV-CPF-1CR
    • GV-CPF-1CT
    • GV-CPF-1D
    • GV-CPF-1DB
    • GV-CPF-1DC
    • GV-CPF-1DG
    • GV-CPF-1DR
    • GV-CPF-1DT
    • GV-CPG-1A
    • GV-CPG-1AB
    • GV-CPG-1AC
    • GV-CPG-1AG
    • GV-CPG-1AR
    • GV-CPG-1AT
    • GV-CPG-1B
    • GV-CPG-1BB
    • GV-CPG-1BC
    • GV-CPG-1BG
    • GV-CPG-1BR
    • GV-CPG-1BT
    • GV-CPG-1C
    • GV-CPG-1CB
    • GV-CPG-1CC
    • GV-CPG-1CG
    • GV-CPG-1CR
    • GV-CPG-1CT
    • GV-CPG-1D
    • GV-CPG-1DB
    • GV-CPG-1DC
    • GV-CPG-1DG
    • GV-CPG-1DR
    • GV-CPG-1DT
    • GV-CPH-1A
    • GV-CPH-1AB
    • GV-CPH-1AC
    • GV-CPH-1AG
    • GV-CPH-1AR
    • GV-CPH-1AT
    • GV-CPH-1B
    • GV-CPH-1BB
    • GV-CPH-1BC
    • GV-CPH-1BG
    • GV-CPH-1BR
    • GV-CPH-1BT
    • GV-CPH-1C
    • GV-CPH-1CB
    • GV-CPH-1CC
    • GV-CPH-1CG
    • GV-CPH-1CR
    • GV-CPH-1CT
    • GV-CPH-1D
    • GV-CPH-1DB
    • GV-CPH-1DC
    • GV-CPH-1DG
    • GV-CPH-1DR
    • GV-CPH-1DT
    • GV-CPK-1A
    • GV-CPK-1AB
    • GV-CPK-1AC
    • GV-CPK-1AG
    • GV-CPK-1AR
    • GV-CPK-1AT
    • GV-CPK-1B
    • GV-CPK-1BB
    • GV-CPK-1BC
    • GV-CPK-1BG
    • GV-CPK-1BR
    • GV-CPK-1BT
    • GV-CPK-1C
    • GV-CPK-1CB
    • GV-CPK-1CC
    • GV-CPK-1CG
    • GV-CPK-1CR
    • GV-CPK-1CT
    • GV-CPK-1D
    • GV-CPK-1DB
    • GV-CPK-1DC
    • GV-CPK-1DG
    • GV-CPK-1DR
    • GV-CPK-1DT
    • GV-CPN-1A
    • GV-CPN-1AB
    • GV-CPN-1AC
    • GV-CPN-1AG
    • GV-CPN-1AR
    • GV-CPN-1AT
    • GV-CPN-1B
    • GV-CPN-1BB
    • GV-CPN-1BC
    • GV-CPN-1BG
    • GV-CPN-1BR
    • GV-CPN-1BT
    • GV-CPN-1C
    • GV-CPN-1CB
    • GV-CPN-1CC
    • GV-CPN-1CG
    • GV-CPN-1CR
    • GV-CPN-1CT
    • GV-CPN-1D
    • GV-CPN-1DB
    • GV-CPN-1DC
    • GV-CPN-1DG
    • GV-CPN-1DR
    • GV-CPN-1DT
    • GV-CPP-1A
    • GV-CPP-1AB
    • GV-CPP-1AC
    • GV-CPP-1AG
    • GV-CPP-1AR
    • GV-CPP-1AT
    • GV-CPP-1B
    • GV-CPP-1BB
    • GV-CPP-1BC
    • GV-CPP-1BG
    • GV-CPP-1BR
    • GV-CPP-1BT
    • GV-CPP-1C
    • GV-CPP-1CB
    • GV-CPP-1CC
    • GV-CPP-1CG
    • GV-CPP-1CR
    • GV-CPP-1CT
    • GV-CPP-1D
    • GV-CPP-1DB
    • GV-CPP-1DC
    • GV-CPP-1DG
    • GV-CPP-1DR
    • GV-CPP-1DT
    • GV-CPX-1A
    • GV-CPX-1AB
    • GV-CPX-1AC
    • GV-CPX-1AG
    • GV-CPX-1AR
    • GV-CPX-1AT
    • GV-CPX-1B
    • GV-CPX-1BB
    • GV-CPX-1BC
    • GV-CPX-1BG
    • GV-CPX-1BR
    • GV-CPX-1BT
    • GV-CPX-1C
    • GV-CPX-1CB
    • GV-CPX-1CC
    • GV-CPX-1CG
    • GV-CPX-1CR
    • GV-CPX-1CT
    • GV-CPX-1D
    • GV-CPX-1DB
    • GV-CPX-1DC
    • GV-CPX-1DG
    • GV-CPX-1DR
    • GV-CPX-1DT

    Clear

  • Shape (Tip shape)

    • No processing
    • C
    • G
    • T
    • R
    • B

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 6 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Mold
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.