(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Gas Release Straight Ejector Pins -High Speed Steel SKH51/Cutting Facets/L Dimension Shaft Diameter・L Dimension Designation Type-

Gas Release Straight Ejector Pins -High Speed Steel SKH51/Cutting Facets/L Dimension Shaft Diameter・L Dimension Designation Type-

Click this image to zoom it.

Move the mouse over the image to zoom

  • Gas Release Straight Ejector Pins -High Speed Steel SKH51/Cutting Facets/L Dimension Shaft Diameter・L Dimension Designation Type-
  • Gas Release Straight Ejector Pins -High Speed Steel SKH51/Cutting Facets/L Dimension Shaft Diameter・L Dimension Designation Type-

MISUMI

MISUMI

High-speed steel SKH51, face cut, shaft diameter/total length specification type degassing straight ejector pin.

PDFP.89

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
45
60
  1. 1
  2. 2
  3. 3
  4. 4
  5. Next >>
Part Number
GW-EPH-L0.6-[40-150/0.01]-E[0.02-0.05/0.01]
GW-EPH-L0.7-[40-150/0.01]-E[0.02-0.05/0.01]
GW-EPH-L0.8-[40-150/0.01]-E[0.02-0.05/0.01]
GW-EPH-L0.9-[40-150/0.01]-E[0.02-0.05/0.01]
GW-EPH-L1-[40-200/0.01]-E[0.02-0.05/0.01]
GW-EPH-L1.2-[40-200/0.01]-E[0.02-0.05/0.01]
GW-EPH-L1.5-[40-250/0.01]-E[0.02-0.05/0.01]
GW-EPH-L2-[40-300/0.01]-E[0.02-0.05/0.01]
GW-EPH-L2.5-[40-300/0.01]-E[0.02-0.05/0.01]
GW-EPH-L3-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L3.5-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L4-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L4.5-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L5-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L5.5-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L6-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L6.5-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L7-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L8-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L10-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPH-L12-[40-350/0.01]-E[0.02-0.05/0.01]
GW-EPHB0.7-[40-100/0.01]-P[0.6-0.69/0.01]-E[0.02-0.05/0.01]
GW-EPHB0.8-[40-150/0.01]-P[0.7-0.79/0.01]-E[0.02-0.05/0.01]
GW-EPHB0.9-[40-150/0.01]-P[0.8-0.89/0.01]-E[0.02-0.05/0.01]
GW-EPHB1-[40-200/0.01]-P[0.9-0.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB1.5-[40-200/0.01]-P[1-1.49/0.01]-E[0.02-0.05/0.01]
GW-EPHB2-[40-250/0.01]-P[1.5-1.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB2.5-[40-300/0.01]-P[2-2.49/0.01]-E[0.02-0.05/0.01]
GW-EPHB3-[40-300/0.01]-P[2.5-2.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB3.5-[40-300/0.01]-P[3-3.49/0.01]-E[0.02-0.05/0.01]
GW-EPHB4-[40-300/0.01]-P[3.5-3.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB4.5-[40-350/0.01]-P[4-4.49/0.01]-E[0.02-0.05/0.01]
GW-EPHB5-[40-350/0.01]-P[4.5-4.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB5.5-[40-350/0.01]-P[5-5.49/0.01]-E[0.02-0.05/0.01]
GW-EPHB6-[40-350/0.01]-P[5.5-5.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB6.5-[40-350/0.01]-P[6-6.49/0.01]-E[0.02-0.05/0.01]
GW-EPHB7-[40-350/0.01]-P[6.5-6.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB8-[40-350/0.01]-P[7-7.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB10-[40-350/0.01]-P[8-9.99/0.01]-E[0.02-0.05/0.01]
GW-EPHB12-[40-350/0.01]-P[10-11.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE0.7-[40-100/0.01]-P[0.6-0.69/0.01]-E[0.02-0.05/0.01]
GW-EPHBE0.8-[40-150/0.01]-P[0.7-0.79/0.01]-E[0.02-0.05/0.01]
GW-EPHBE0.9-[40-150/0.01]-P[0.8-0.89/0.01]-E[0.02-0.05/0.01]
GW-EPHBE1-[40-200/0.01]-P[0.9-0.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE1.5-[40-200/0.01]-P[1-1.49/0.01]-E[0.02-0.05/0.01]
GW-EPHBE2-[40-250/0.01]-P[1.5-1.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE2.5-[40-300/0.01]-P[2-2.49/0.01]-E[0.02-0.05/0.01]
GW-EPHBE3-[40-300/0.01]-P[2.5-2.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE3.5-[40-300/0.01]-P[3-3.49/0.01]-E[0.02-0.05/0.01]
GW-EPHBE4-[40-300/0.01]-P[3.5-3.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE4.5-[40-350/0.01]-P[4-4.49/0.01]-E[0.02-0.05/0.01]
GW-EPHBE5-[40-350/0.01]-P[4.5-4.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE5.5-[40-350/0.01]-P[5-5.49/0.01]-E[0.02-0.05/0.01]
GW-EPHBE6-[40-350/0.01]-P[5.5-5.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE6.5-[40-350/0.01]-P[6-6.49/0.01]-E[0.02-0.05/0.01]
GW-EPHBE7-[40-350/0.01]-P[6.5-6.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE8-[40-350/0.01]-P[7-7.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE10-[40-350/0.01]-P[8-9.99/0.01]-E[0.02-0.05/0.01]
GW-EPHBE12-[40-350/0.01]-P[10-11.99/0.01]-E[0.02-0.05/0.01]
GW-EPHE-L0.6-[40-150/0.01]-E[0.02-0.05/0.01]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSD/P (Shaft diameter)
(mm) 		Shaft diameter tolerance (Reference tolerance) L dimension tolerance (Reference tolerance) Head thickness Gas release shape No. (Nominal diameter)
(mm) 		L (L dimension)
(mm) 		E
(mm)

-

1 Piece(s) 8 Day(s) 100.60/-0.005+0.02/04mm(T4)Single flat cutting-40 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.70/-0.005+0.02/04mm(T4)Single flat cutting-40 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.80/-0.005+0.02/04mm(T4)Single flat cutting-40 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.90/-0.005+0.02/04mm(T4)Single flat cutting-40 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 1010/-0.005+0.02/04mm(T4)Single flat cutting-40 ～ 2000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 101.20/-0.005+0.02/04mm(T4)Single flat cutting-40 ～ 2000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 101.50/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 2500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 1020/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3000.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 102.50/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 1030/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 103.50/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 1040/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 104.50/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 1050/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 105.50/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 1060/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 106.50/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 1070/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 1080/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 10100/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 10120/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting-40 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.6 ～ 0.690/-0.005+0.02/04mm(T4)Single flat cutting0.740 ～ 1000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.7 ～ 0.790/-0.005+0.02/04mm(T4)Single flat cutting0.840 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.8 ～ 0.890/-0.005+0.02/04mm(T4)Single flat cutting0.940 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.9 ～ 0.990/-0.005+0.02/04mm(T4)Single flat cutting140 ～ 2000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 101 ～ 1.490/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting1.540 ～ 2000.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 101.5 ～ 1.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting240 ～ 2500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 102 ～ 2.490/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting2.540 ～ 3000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 102.5 ～ 2.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting340 ～ 3000.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 103 ～ 3.490/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting3.540 ～ 3000.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 103.5 ～ 3.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting440 ～ 3000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 104 ～ 4.490/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting4.540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 104.5 ～ 4.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 105 ～ 5.490/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting5.540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 105.5 ～ 5.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting640 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 106 ～ 6.490/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting6.540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 106.5 ～ 6.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting740 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 107 ～ 7.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting840 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 108 ～ 9.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting1040 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 1010 ～ 11.990/-0.005+0.02/0 or +0.05/04mm(T4)Single flat cutting1240 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.6 ～ 0.69-0.01/-0.02+0.02/04mm(T4)Single flat cutting0.740 ～ 1000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.7 ～ 0.79-0.01/-0.02+0.02/04mm(T4)Single flat cutting0.840 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.8 ～ 0.89-0.01/-0.02+0.02/04mm(T4)Single flat cutting0.940 ～ 1500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.9 ～ 0.99-0.01/-0.02+0.02/04mm(T4)Single flat cutting140 ～ 2000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 101 ～ 1.49-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting1.540 ～ 2000.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 101.5 ～ 1.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting240 ～ 2500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 102 ～ 2.49-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting2.540 ～ 3000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 102.5 ～ 2.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting340 ～ 3000.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 103 ～ 3.49-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting3.540 ～ 3000.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 103.5 ～ 3.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting440 ～ 3000.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 104 ～ 4.49-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting4.540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 104.5 ～ 4.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 105 ～ 5.49-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting5.540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 105.5 ～ 5.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting640 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 106 ～ 6.49-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting6.540 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 106.5 ～ 6.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting740 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 107 ～ 7.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting840 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 108 ～ 9.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting1040 ～ 3500.02 ～ 0.05

-

1 Piece(s) 6 Day(s) or more 1010 ～ 11.99-0.01/-0.02+0.02/0 or +0.05/04mm(T4)Single flat cutting1240 ～ 3500.02 ～ 0.05

-

1 Piece(s) 8 Day(s) 100.6-0.01/-0.02+0.02/04mm(T4)Single flat cutting-40 ～ 1500.02 ～ 0.05

Loading...

  1. 1
  2. 2
  3. 3
  4. 4
  5. Next >>
 

Basic Information

Material SKH51 Surface treatment No Shape type Gas release
Tip shape No Character engraving type No Number of engraving characters No

Configure

Clear All

218 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • D/P (Shaft diameter)(mm)

    • 0.6
    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.2
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 12

     [0.6-11.99/0.01mm Unit(s)]

    Clear

  • Shaft diameter tolerance (Reference tolerance)

    • -0.01/-0.02
    • 0/-0.005

    Clear

  • L dimension tolerance (Reference tolerance)

    • +0.02/0
    • +0.02/0 or +0.05/0

    Clear

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Clear

  • Gas release shape

    • Single flat cutting
    • Four flats cutting

    Clear

  • No. (Nominal diameter)(mm)

    • 0.7
    • 0.8
    • 0.9
    • 1
    • 1.5
    • 2
    • 2.5
    • 3
    • 3.5
    • 4
    • 4.5
    • 5
    • 5.5
    • 6
    • 6.5
    • 7
    • 8
    • 10
    • 12

    Clear

  • L (L dimension)(mm)

     [40-350/0.01mm Unit(s)]

    Clear

  • E(mm)

     [0.02-0.05/0.01mm Unit(s)]

    Clear

  • type

    • GW-EPH-L
    • GW-EPHB
    • GW-EPHBE
    • GW-EPHE-L
    • GW-EPHJ-L
    • GW-EPHJB
    • GW-EPHJBE
    • GW-EPHJE-L
    • GWS-EPH-L
    • GWS-EPHB
    • GWS-EPHBE
    • GWS-EPHE-L
    • GWS-EPHJ-L
    • GWS-EPHJB
    • GWS-EPHJBE
    • GWS-EPHJE-L

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 6 Day(s) or Less
    • 8 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Customers Who Viewed This Item Also Viewed

Tech Support

Mold
Tel：(60) 3 7890 6399
9:00am - 6:00pm (Monday - Friday)
9:00am - 1:00pm (Saturday)
Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.