(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Webcode Seach | Series
#CODE
Keyword suggestions
Part number suggestions
Discontinued Products

Loading

  • [Notice] Japan & China Golden Week holidays will start from 29 April to 6 May 2026. Kindly expect longer response from suppliers and possible delivery delay due to high volume of shipments after holiday. Early order placement is recommended. More details
  • [Announcement] MISUMI Malaysia website new user interface. Clearer navigation, easy product search and more. Explore now! May contact us at (60) 3 7890 6399 for any inquiries.

  • How can we improve?

    How can we improve?

    Comments
    Name (Optional)
    E-mail Address (Optional)
    Tel (Optional)

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Customer Privacy Policy

    Thank you for your cooperation.

    While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
    Please use the inquiry form.

    Customer Privacy Policy

Straight Pilot Punches for Fixing to Stripper Plates Normal, Lapping, TiCN Coating (Part Numbers)

Straight Pilot Punches for Fixing to Stripper Plates Normal, Lapping, TiCN Coating

MISUMI

MISUMI

This is a pilot punch that is installed on the stripper plate, and the punch holding part and tip positioning part have the same diameter. This is effective when the installation pitch of the pilot punch is small. You can choose from a regular polished finish, a TiCN coating to improve wear resistance, or a lapping tip to improve surface roughness.

  • FLANGE
  • SKH51
  • POWDER HSS
  • TiCN

PDFP.297

Part Number

Configured Part Number is shown.

Part Number 

CAD Data download and 3D preview are not available because the part number has not yet been determined.

  • *In order to open the CAD Data download and 3D preview screen, the part number must be fixed.
  • Please confirm the part number from "Specification / Dimension"on the left side, and then perform the CAD Data Download / 3D Preview operation.
Loading...

CAD Download

30
60
90
  1. << Prev
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next >>
Part Number
L-APT1.6-[10-40/0.1]-P[0.5-1.6/0.01]-A[10,​15,​20,​25,​30]
L-APT1.6-[10-40/0.1]-P[0.5-1.6/0.01]-AC[16-45/1]
L-APT2.0-[10-40/0.1]-P[1-2/0.001]-A[10,​15,​20,​25,​30]
L-APT2.0-[10-40/0.1]-P[1-2/0.001]-AC[16-45/1]
L-APT2.0-[10-40/0.1]-P[1-2/0.01]-A[10,​15,​20,​25,​30]
L-APT2.0-[10-40/0.1]-P[1-2/0.01]-AC[16-45/1]
L-APT2.5-[10-40/0.1]-AC[16-45/1]-A[10,​15,​20,​25,​30]
L-APT2.5-[10-40/0.1]-AC[16-45/1]-AC[16-45/1]
L-APT2.5-[10-40/0.1]-P[1.5-2.5/0.001]-A[10,​15,​20,​25,​30]
L-APT2.5-[10-40/0.1]-P[1.5-2.5/0.001]-AC[16-45/1]
L-APT2.5-[10-40/0.1]-P[1.5-2.5/0.01]-A[10,​15,​20,​25,​30]
L-APT2.5-[10-40/0.1]-P[1.5-2.5/0.01]-AC[16-45/1]
L-APT3-[10-40/0.1]-P[2-3/0.001]-A[15,​20,​25,​30]
L-APT3-[10-40/0.1]-P[2-3/0.001]-AC[16-45/1]
L-APT3-[10-40/0.1]-P[2-3/0.01]-A[15,​20,​25,​30]
L-APT3-[10-40/0.1]-P[2-3/0.01]-AC[16-45/1]
L-APT4-[10-40/0.1]-P[3-4/0.001]-A[15,​20,​25,​30]
L-APT4-[10-40/0.1]-P[3-4/0.001]-AC[16-45/1]
L-APT4-[10-40/0.1]-P[3-4/0.01]-A[15,​20,​25,​30]
L-APT4-[10-40/0.1]-P[3-4/0.01]-AC[16-45/1]
L-APT5-[10-40/0.1]-P[4-5/0.001]-A[15,​20,​25,​30]
L-APT5-[10-40/0.1]-P[4-5/0.001]-AC[16-45/1]
L-APT5-[10-40/0.1]-P[4-5/0.01]-A[15,​20,​25,​30]
L-APT5-[10-40/0.1]-P[4-5/0.01]-AC[16-45/1]
L-APT6-[10-40/0.1]-P[5-6/0.001]-A[15,​20,​25,​30]
L-APT6-[10-40/0.1]-P[5-6/0.001]-AC[16-45/1]
L-APT6-[10-40/0.1]-P[5-6/0.01]-A[15,​20,​25,​30]
L-APT6-[10-40/0.1]-P[5-6/0.01]-AC[16-45/1]
L-APT8-[10-40/0.1]-P[6-8/0.001]-A[15,​20,​25,​30]
L-APT8-[10-40/0.1]-P[6-8/0.001]-AC[16-45/1]
L-APT8-[10-40/0.1]-P[6-8/0.01]-A[15,​20,​25,​30]
L-APT8-[10-40/0.1]-P[6-8/0.01]-AC[16-45/1]
L-APT10-[10-40/0.1]-P[8-10/0.001]-A[15,​20,​25,​30]
L-APT10-[10-40/0.1]-P[8-10/0.001]-AC[16-45/1]
L-APT10-[10-40/0.1]-P[8-10/0.01]-A[15,​20,​25,​30]
L-APT10-[10-40/0.1]-P[8-10/0.01]-AC[16-45/1]
L-APT13-[10-40/0.1]-P[10-13/0.001]-A[15,​20,​25,​30]
L-APT13-[10-40/0.1]-P[10-13/0.001]-AC[16-19/1]
L-APT13-[10-40/0.1]-P[10-13/0.001]-AC[21-24/1]
L-APT13-[10-40/0.1]-P[10-13/0.001]-AC[26-29/1]
L-APT13-[10-40/0.1]-P[10-13/0.001]-AC[31-45/1]
L-APT13-[10-40/0.1]-P[10-13/0.01]-A[15,​20,​25,​30]
L-APT13-[10-40/0.1]-P[10-13/0.01]-AC[16-19/1]
L-APT13-[10-40/0.1]-P[10-13/0.01]-AC[21-24/1]
L-APT13-[10-40/0.1]-P[10-13/0.01]-AC[26-29/1]
L-APT13-[10-40/0.1]-P[10-13/0.01]-AC[31-45/1]
L-APT16-[10-40/0.1]-P[13-16/0.001]-A[15,​20,​25,​30]
L-APT16-[10-40/0.1]-P[13-16/0.001]-AC[16-19/1]
L-APT16-[10-40/0.1]-P[13-16/0.001]-AC[21-24/1]
L-APT16-[10-40/0.1]-P[13-16/0.001]-AC[26-29/1]
L-APT16-[10-40/0.1]-P[13-16/0.001]-AC[31-45/1]
L-APT16-[10-40/0.1]-P[13-16/0.01]-A[15,​20,​25,​30]
L-APT16-[10-40/0.1]-P[13-16/0.01]-AC[16-19/1]
L-APT16-[10-40/0.1]-P[13-16/0.01]-AC[21-24/1]
L-APT16-[10-40/0.1]-P[13-16/0.01]-AC[26-29/1]
L-APT16-[10-40/0.1]-P[13-16/0.01]-AC[31-45/1]
L-HTFA1.6-[10-40/0.1]-P[0.5-1.6/0.001]-A[10,​15,​20,​25,​30]
L-HTFA1.6-[10-40/0.1]-P[0.5-1.6/0.001]-AC[16-45/1]
L-HTFA2.0-[10-40/0.1]-P[1-2/0.001]-A[10,​15,​20,​25,​30]
L-HTFA2.0-[10-40/0.1]-P[1-2/0.001]-AC[16-45/1]
L-HTFA2.5-[10-40/0.1]-P[1.5-2.5/0.001]-A[10,​15,​20,​25,​30]
L-HTFA2.5-[10-40/0.1]-P[1.5-2.5/0.001]-AC[16-45/1]
L-HTFA3-[10-40/0.1]-P[2-3/0.001]-A[15,​20,​25,​30]
L-HTFA3-[10-40/0.1]-P[2-3/0.001]-AC[16-45/1]
L-HTFA4-[10-40/0.1]-P[3-4/0.001]-A[15,​20,​25,​30]
L-HTFA4-[10-40/0.1]-P[3-4/0.001]-AC[16-45/1]
L-HTFA5-[10-40/0.1]-P[4-5/0.001]-A[15,​20,​25,​30]
L-HTFA5-[10-40/0.1]-P[4-5/0.001]-AC[16-45/1]
L-HTFA6-[10-40/0.1]-P[5-6/0.001]-A[15,​20,​25,​30]
L-HTFA6-[10-40/0.1]-P[5-6/0.001]-AC[16-45/1]
L-HTFA8-[10-40/0.1]-P[6-8/0.001]-A[15,​20,​25,​30]
L-HTFA8-[10-40/0.1]-P[6-8/0.001]-AC[16-45/1]
L-HTFA10-[10-40/0.1]-P[8-10/0.001]-A[15,​20,​25,​30]
L-HTFA10-[10-40/0.1]-P[8-10/0.001]-AC[16-45/1]
L-HTFA13-[10-40/0.1]-P[10-13/0.001]-A[15,​20,​25,​30]
L-HTFA13-[10-40/0.1]-P[10-13/0.001]-AC[16-19/1]
L-HTFA13-[10-40/0.1]-P[10-13/0.001]-AC[21-24/1]
L-HTFA13-[10-40/0.1]-P[10-13/0.001]-AC[26-29/1]
L-HTFA13-[10-40/0.1]-P[10-13/0.001]-AC[31-45/1]
L-HTFA16-[10-40/0.1]-P[13-16/0.001]-A[15,​20,​25,​30]
L-HTFA16-[10-40/0.1]-P[13-16/0.001]-AC[16-19/1]
L-HTFA16-[10-40/0.1]-P[13-16/0.001]-AC[21-24/1]
L-HTFA16-[10-40/0.1]-P[13-16/0.001]-AC[26-29/1]
L-HTFA16-[10-40/0.1]-P[13-16/0.001]-AC[31-45/1]
L-HTFR1.6-[10-40/0.1]-P[0.5-1.6/0.001]
L-HTFR2.0-[10-40/0.1]-P[1-2/0.001]
L-HTFR2.5-[10-40/0.1]-P[1.5-2.5/0.001]
L-HTFR3-[10-40/0.1]-P[2-3/0.001]
L-HTFR4-[10-40/0.1]-P[3-4/0.001]
L-HTFR5-[10-40/0.1]-P[4-5/0.001]
Part NumberStandard Unit PriceMinimum order quantityVolume DiscountDays to ShipRoHSTip shape Material Surface treatment No. (Nominal diameter)
(mm) 		L (L dimension)
(mm) 		A (Taper angle)
(°) 		Tip angle change [AC]
(°) 		P (Tip dimension)
(mm)

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1.610 ～ 4010 ～ 15-0.5 ～ 1.6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1.610 ～ 40-16 ～ 450.5 ～ 1.6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.010 ～ 4010 ～ 15-1 ～ 2

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.010 ～ 40-16 ～ 451 ～ 2

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.010 ～ 4010 ～ 15-1 ～ 2

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.010 ～ 40-16 ～ 451 ～ 2

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.510 ～ 4010 ～ 1516 ～ 45-

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.510 ～ 40-16 ～ 45-

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.510 ～ 4010 ～ 15-1.5 ～ 2.5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.510 ～ 40-16 ～ 451.5 ～ 2.5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.510 ～ 4010 ～ 15-1.5 ～ 2.5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping2.510 ～ 40-16 ～ 451.5 ～ 2.5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping310 ～ 4015-2 ～ 3

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping310 ～ 40-16 ～ 452 ～ 3

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping310 ～ 4015-2 ～ 3

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping310 ～ 40-16 ～ 452 ～ 3

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping410 ～ 4015-3 ～ 4

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping410 ～ 40-16 ～ 453 ～ 4

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping410 ～ 4015-3 ～ 4

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping410 ～ 40-16 ～ 453 ～ 4

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping510 ～ 4015-4 ～ 5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping510 ～ 40-16 ～ 454 ～ 5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping510 ～ 4015-4 ～ 5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping510 ～ 40-16 ～ 454 ～ 5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping610 ～ 4015-5 ～ 6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping610 ～ 40-16 ～ 455 ～ 6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping610 ～ 4015-5 ～ 6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping610 ～ 40-16 ～ 455 ～ 6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping810 ～ 4015-6 ～ 8

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping810 ～ 40-16 ～ 456 ～ 8

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping810 ～ 4015-6 ～ 8

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping810 ～ 40-16 ～ 456 ～ 8

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1010 ～ 4015-8 ～ 10

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1010 ～ 40-16 ～ 458 ～ 10

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1010 ～ 4015-8 ～ 10

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1010 ～ 40-16 ～ 458 ～ 10

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 4015-10 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-16 ～ 1910 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-21 ～ 2410 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-26 ～ 2910 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-31 ～ 4510 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 4015-10 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-16 ～ 1910 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-21 ～ 2410 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-26 ～ 2910 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1310 ～ 40-31 ～ 4510 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 4015-13 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-16 ～ 1913 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-21 ～ 2413 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-26 ～ 2913 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-31 ～ 4513 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 4015-13 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-16 ～ 1913 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-21 ～ 2413 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-26 ～ 2913 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKD11 EquivalentLapping1610 ～ 40-31 ～ 4513 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1.610 ～ 4010 ～ 15-0.5 ～ 1.6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1.610 ～ 40-16 ～ 450.5 ～ 1.6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping2.010 ～ 4010 ～ 30-1 ～ 2

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping2.010 ～ 40-16 ～ 451 ～ 2

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping2.510 ～ 4010 ～ 15-1.5 ～ 2.5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping2.510 ～ 40-16 ～ 451.5 ～ 2.5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping310 ～ 4015-2 ～ 3

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping310 ～ 40-16 ～ 452 ～ 3

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping410 ～ 4015-3 ～ 4

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping410 ～ 40-16 ～ 453 ～ 4

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping510 ～ 4015-4 ～ 5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping510 ～ 40-16 ～ 454 ～ 5

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping610 ～ 4015-5 ～ 6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping610 ～ 40-16 ～ 455 ～ 6

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping810 ～ 4015-6 ～ 8

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping810 ～ 40-16 ～ 456 ～ 8

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1010 ～ 4015-8 ～ 10

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1010 ～ 40-16 ～ 458 ～ 10

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1310 ～ 4015-10 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1310 ～ 40-16 ～ 1910 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1310 ～ 40-21 ～ 2410 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1310 ～ 40-26 ～ 2910 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1310 ～ 40-31 ～ 4510 ～ 13

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1610 ～ 4015-13 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1610 ～ 40-16 ～ 1913 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1610 ～ 40-21 ～ 2413 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1610 ～ 40-26 ～ 2913 ～ 16

-

1 Piece(s) 4 Day(s) 10Sharp tip angleSKH51 EquivalentLapping1610 ～ 40-31 ～ 4513 ～ 16

-

1 Piece(s) 4 Day(s) 10Tip RSKH51 EquivalentLapping1.610 ～ 40--0.5 ～ 1.6

-

1 Piece(s) 4 Day(s) 10Tip RSKH51 EquivalentLapping2.010 ～ 40--1 ～ 2

-

1 Piece(s) 4 Day(s) 10Tip RSKH51 EquivalentLapping2.510 ～ 40--1.5 ～ 2.5

-

1 Piece(s) 4 Day(s) 10Tip RSKH51 EquivalentLapping310 ～ 40--2 ～ 3

-

1 Piece(s) 4 Day(s) 10Tip RSKH51 EquivalentLapping410 ～ 40--3 ～ 4

-

1 Piece(s) 4 Day(s) 10Tip RSKH51 EquivalentLapping510 ～ 40--4 ～ 5

Loading...

  1. << Prev
  2. 1
  3. 2
  4. 3
  5. 4
  6. 5
  7. Next >>
 

Basic Information

Shank type Standard Mounting plate Stripper plate Shank (mounting part) shape Standard

Configure

Clear All

458 Part Numbers

View Part Numbers

Configure Remaining Specifications
Completed
loading

Specification/Dimensions

  • Tip shape

    • Tip R
    • Tapered tip
    • Sharp tip angle

    Clear

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Clear

  • Surface treatment

    • None
    • TiCN
    • Lapping

    Clear

  • No. (Nominal diameter)(mm)

    • 1.6
    • 2.0
    • 2.5
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 13
    • 16

    Clear

  • L (L dimension)(mm)

     [10-40/0.1mm Unit(s)]

    Clear

  • A (Taper angle)(°)

    • 10
    • 15
    • 20
    • 25
    • 30

    Clear

  • Tip angle change [AC](°)

     [16-45/1° Unit(s)]

    Clear

  • P (Tip dimension)(mm)

     [0.5-16/0.01mm Unit(s)][0.5-16/0.001mm Unit(s)]

    Clear

  • type

    • APT
    • H-HTFA
    • H-HTFR
    • H-HTFT
    • H-PTFA
    • H-PTFR
    • H-PTFT
    • HTFA
    • HTFR
    • HTFT
    • L-APT
    • L-HTFA
    • L-HTFR
    • L-HTFT
    • L-PTFA
    • L-PTFR
    • L-PTFT
    • L-SPT
    • L-TPT
    • PTFA
    • PTFR
    • PTFT
    • SPT
    • TPT

    Clear

  • CAD

    • 2D
    • 3D

    Clear

Days to Ship

    • All
    • 2 Day(s) or Less
    • 3 Day(s) or Less
    • 4 Day(s) or Less

    Clear

Specify Alterations

Additional Products in this Category

Tech Support

Technical Inquiry

Payment Method

more
  • Credit Card
    • VISA
    • MasterCard
  • Bank Transfer
    • FPX
    • Interbank GIRO (IBG)

About MISUMI

About this Website

Useful Tools

Customer Service

Social Media

MISUMI Contact 9am – 6pm (Mon – Fri) * Order cut-off time is 5pm,    9am – 1pm(Sat) * Order cut-off time is 12pm

  • Tel: (60) 3 7890 6399
Inquiry
Mobile View

Copyright © MISUMI Corporation All Rights Reserved.